As an Amazon Associate I earn from qualifying purchases.

Material: aluminum heat shielding on one side and heat blanketing material fiberglasss.







1. Design Engineering
#ad
Design Engineering 010402 Versa-Shield 7" x 24" Starter Heat Shield Wrap
#adDesign Engineering #ad - Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier. Additional uses include protecting master cylinders, cool cans, distributors, fuel pumps, and more.More information #ad
Protect your starters from potential failure caused by under-hood heat soak conditions. Easy to install with hook & loop closure system - no need to remove starter for installation. Withstands 500 degrees fahrenheit of direct heat and 2000 degrees Fahrenheit of radiant heat. 7-inch wide 24-Inch long.Brand | Design Engineering #ad |
Manufacturer | Design Engineering #ad |
Height | 11 Inches |
Length | 8.25 Inches |
Weight | 0.35 Pounds |
Width | 1.25 Inches |
Part Number | 10402 |
Model | 10402 |
Warranty | DEI warrants to the original retail purchaser with proof of purchase for warranty determination that its products are free from defects in material and workmanship while purchaser owns the vehicle upon which such product(s) were originally installed. DEI’s obligation under this warranty shall be limited to the repair or replacement of parts that are determined by DEI to be defective, or refund of the products original purchase price, at DEI’s option, of the alleged defective product. We pledge that if at any time you encounter a problem with our products, we will strive to correct the problem in the most timely and efficient way possible, subject to the terms, conditions, and Limitations contained herein. |
More information #ad
2. SWI
#ad
SWI PARTS Aluminum and fiberglasss heat shielding Universal Starter heat shield 7 X 24 in Wrap Self Attaching
#adSWI #ad - The starter heat shield is a universal kit that fits all starters; Help prevent starter failure caused by overheating, Prolong your starter's life and improve its performance, Contains no asbestos, and Easy Installation.Material: aluminum heat shielding on one side and heat blanketing material fiberglasss.
More information #ad
The starter heat shield will reflect over 90 per cent of radiant heat up to 2000 degrees Fahrenheit adding life to the starter and assuring reliable starts. Non-conductive strap-on heat shield with a highly-reflective mylar surface. Universal starter heat shield 7 X 24 in Wrap Self-Attaching.Brand | SWI #ad |
Manufacturer | SW INDUSTRIAL #ad |
Weight | 0.2 Pounds |
Part Number | SW-AS724-1 |
More information #ad
3. Design Engineering
#ad
7" x 2', Design Engineering 010236 ONYX Series Starter Heat Shield
#adDesign Engineering #ad - Protect your starter from up to 1350 degrees Fahrenheit of direct heat. Provides reliable heat protection for starters under severe duty or extreme heat, preventing starter malfunction due to heat soak. Multi-purpose in design and fit, this shield also can be used to wrap most master cylinders, distributors, fuel pumps and many other components.More information #ad
Can be trimmed to size and fastens with a hook and loop system that makes it easy to install without removing the starter. Fit type: Universal Fit. Dual layered for maximum thermal control.Brand | Design Engineering #ad |
Manufacturer | Design Engineering, Inc. #ad |
Height | 10.94 Inches |
Length | 8.06 Inches |
Weight | 0.46 Pounds |
Width | 0.88 Inches |
Part Number | 10236 |
Model | 10236 |
Warranty | DEI warrants to the original retail purchaser with proof of purchase for warranty determination that its products are free from defects in material and workmanship while purchaser owns the vehicle upon which such product(s) were originally installed. DEI’s obligation under this warranty shall be limited to the repair or replacement of parts that are determined by DEI to be defective, or refund of the products original purchase price, at DEI’s option, of the alleged defective product. We pledge that if at any time you encounter a problem with our products, we will strive to correct the problem in the most timely and efficient way possible, subject to the terms, conditions, and Limitations contained herein. |
More information #ad
4. ACDelco
#ad
GM Genuine Parts 12668713 Starter Heat Shield
#adACDelco #ad - Product type :AUTO PART. Country of origin :United States. Package dimensions :6. 35 cm l x8. 636 cm w x13. 335 cm H. Package weight :018lbs.More information #ad
Brand | ACDelco #ad |
Manufacturer | ACDelco #ad |
Height | 3 Inches |
Length | 3 Inches |
Weight | 0.18 Pounds |
Width | 6 Inches |
Part Number | 12668713 |
Model | 12668713 |
Warranty | 24 Month / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details. |
More information #ad
5. Thermal Zero
#ad
Big Block engines and many more., prevents premature starter failure, Thermal Zero, Fits starters on Chevrolet, Chrysler, Small Block, Universal Starter Heat Shield Barrier Blanket, Ford
#adThermal Zero #ad - Very thick aluminized insulation helps to eliminate intermittent starter failure due to radiant heat. Aluminized layer reflects over 90% of radiant heat up to 2000°F allowing the starter to last longer.More information #ad
Simple, easy to install heat shield wrap with an extremely effective radiant heat reflective surface. Proudly manufactured in the USA. Material can easily be cut to fit most all starters. Inexpensive, durable solution for starters solenoids that overheat due to exhaust in close proximity.Brand | Thermal Zero #ad |
Manufacturer | Thermal Zero #ad |
Height | 1.5 Inches |
Length | 8 Inches |
Width | 4.5 Inches |
Part Number | USHB |
Model | USHB |
More information #ad
6. Mr. Gasket
#ad
Mr. Gasket 3678 Starter Motor Heat Shield
#adMr. Gasket #ad - Package dimensions: 8. 2 l x 5. 9 h x 6 w inches. Package weight : 08 pounds. Fit type: Vehicle Specific. Country of Origin : United States.More information #ad
Brand | Mr. Gasket #ad |
Manufacturer | Mr Gasket #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 0.8 Pounds |
Width | 0 Inches |
Part Number | 3678 |
Model | 3678 |
More information #ad
7. Thermo-Tec
#ad
Thermo-Tec 14150 Starter Heat Shield, 7" x 22", Silver
#adThermo-Tec #ad - Fit type: Vehicle Specific. Reflects over 90% of radiant heat, adding life to the starter and assuring reliable starts. Protect your starter from damaging heat that destroys the windings of the starter and solenoid.More information #ad
The universal fit is easy to install with included SnapStrap fasteners - no need to remove starter. Non-conductive heat shield with a highly-reflective Mylar surface. Offers up to 2000 degrees Fahrenheit of radiant heat protection.Brand | Thermo-Tec #ad |
Manufacturer | Thermo-Tec Products #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 0.2 Pounds |
Width | 0 Inches |
Part Number | 14150 |
Model | 14150 |
Warranty | Contact manufacturer |
More information #ad
8. Spectre
#ad
Spectre Performance 4370 Stainless Steel Starter Heat Shield
#adSpectre #ad - Features stainless steel construction. Recommended for vehicles with headers. Made from high quality material. Fits all chevrolet v8 and v6 with block-mounted starters.More information #ad
Recommended for vehicles with heaters. Fits chevrolet v8 and V6 engines with block-mounted starters. Stainless steel construction. Protects the starter from exhaust heat.Brand | Spectre #ad |
Manufacturer | Spectre #ad |
Height | 3 Inches |
Length | 11 Inches |
Weight | 0.69 Pounds |
Width | 9 Inches |
Part Number | 4370 |
Model | SPE-4370 |
Warranty | 90 Days |
More information #ad
9. Speedway Motors
#ad
Polished Aluminum Fits Chevy Compact Mini Starter Heat Shield/Cover
#adSpeedway Motors #ad - Aluminum construction. 3. 25" in height. 6. 06" wide. 5. 43" long. Polished or raw finish available.More information #ad
Brand | Speedway Motors #ad |
Manufacturer | Speedway Motors #ad |
Height | 3.4 Inches |
Length | 8.9 Inches |
Weight | 3 Pounds |
Width | 7.9 Inches |
Part Number | 91017481-POL |
More information #ad