As an Amazon Associate I earn from qualifying purchases.
1. TotalBoat #ad
Aluminum and Steel Gallon Kit, Wood, TotalBoat-409337 TotalFair Marine Epoxy Fairing Compound for Fiberglass #adTotalBoat #ad
- Marine-grade putty is also great for home, lightweight two-part ePOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, rv and auto repair. Super smooth finish for permanent, aluminum, waterproof repairs: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline.
Note: totalboat gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly.
Cures fast. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces.
High-strength, canoe or other watercraft. Easy to sand and paint: quick-drying compound is ready to sand in just 3 hours at 80°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints. Choose kit size: 2-pint kit, 2-quart kit or 1-gallon kit. Easy to mix and apply: foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green.
2. Generic #ad
Non-Tacky Finish, Car & Truck Exterior Canoe, Surfboards, RV, Biaxle & Cloth for Boats, Polyester Resin 1 Gallon w/ 2oz MEKP Hardener Grade-A Low Viscosity Coating for Laminating Fiberglass mat, Hard #adGeneric #ad
- The set includes a 2-ounce bottle of MEKP hardener, enough for 1 gallon of resin. Depending on temperature and humidity, it can reach its cured stage in as quick as 4 hours but may take up to 24 hours if not mixed fully or temperature are lower than 72°F, If temperatures are too low it will take even longer.
Dries tack-free - manufactured in the usa, this dcpd-type resin dries tack free without the need for wax. Grade a - not your ordinary boatyard resin, this polyester Fiberglass laminating resin is the highest grade you will find - a premium product used in the marine industry and by most manufacturers.
High compatibility - compatible with all types of Fiberglass and coring materials, new construction parts, this polyester laminating resin is perfect for low-cost high quality repairs, and vertical surfaces.
Cures fast - use this resin on wood, fiberglass, or metal without any hassle. Multiple applications - this polyester fiberglass resin is great for the following applications: marine, auto body, wood, aero space, transportation, FRP Fiber Reinforced Plastic parts, general purpose laminating, and much more.
3. Clearcast 7000 #ad
Construction, The Epoxy resin Store, Boat Marine Epoxy Resin designed for Coatings, Repairs, UV Stable Excellent Non yellowing For High Performance Coatings, 2 part epoxy kit, Excellent Table Top, Concrete & Wood Coating System | High Performance Industrial Kit, Countertops #adClearcast 7000 #ad
- Safe to use Indoors VOC Free. Cures clear and Rock Hard. Fast Cure. Perfect for Wood and Fiberglass. Easy Mixing.
4. TotalBoat #ad
TotalBoat, 512949 Polyester Fairing Compound Quart Kit #adTotalBoat #ad
- Easy to apply by trowel or spreader; buttery consistency spreads smoothly to a feathered edge, and won't sag on vertical surfaces; ideal as a finishing putty over high-strength TotalBoat Polyester Structural Repair Putty.
Versatile fiberglass fairing compound has multiple uses, including repairing fiberglass parts & molds, and quick cosmetic repairs to fiberglass decks and hulls. Premium marine-grade 2-part polyester fiberglass filler and fairing compound for cosmetic repairs on gelcoat, spider cracks, print-through, fiberglass and other composite surfaces above the waterline; fill pinholes, sanding marks & other surface defects.
Available in 2 sizes: quart kit and gallon kit: each includes mekp catalyst; at 77°f, add 14-16 drops of MEKP to one ounce of TotalBoat Polyester Fairing Compound for a working time of 10-15 minutes, with a cure time of roughly 20-30 minutes.
Cures fast, easy to sand: fast-setting fairing filler cures in just 20-30 minutes at 77°F, with minimal shrinkage and no pinholes; easy to sand smooth in preparation for gelcoat or primer and paint.
5. Bondo #ad
Interior and Exterior Home Use, 28.8 fl oz, 100% Waterproof, Bondo Fiberglass Resin, Durable, Strong #adBondo #ad
- For industrial/occupational use only. Provides long-term structural strength when used with Bondo Fiberglass Cloth or Mat. Compatible with most paints and gel coats.
100% waterproof for use as a sealant and reliable tub, shower, sink, and auto repair. Not for consumer sale or use. Use for small to very large repairs to any fiberglass, metal, wood or masonry surface.
Includes bondo Liquid Hardener Easy for easy and accurate mix. Strong and versatile formula for multiple surfaces including concrete, fiberglass, wood, and metal. High-strength polyester resin designed for interior and exterior home repair and building projects. 1 quart Can.
|Manufacturer||Bondo Home Solutions #ad|
6. Superior Stone Products #ad
Halfeary Superior Stone Polyester Transparent Knife-Grade Adhesive 1 Quart for Natural Stone Filling & Laminating #adSuperior Stone Products #ad
- Strong bonds to Porous Natural Stones. Light amber paste Translucent Color for Indoor Use. 10-20 minute curing time Once Catalyst Hardner is Added. Excellent shelf stability 3 to 4 Years for Consistent Performance. Fast curing with No Tack Even in Colder Temperatures.
7. Bondo #ad
Bondo All-Purpose Putty, Designed for Interior and Exterior Home Use, Permanent, 1-Quart, Paintable, 1.9 lb., Non-Shrinking #adBondo #ad
- White bondo Cream Hardener included. Cures fast; sandable in 15 minutes for fast same-day repairs. Two-part filler bonds to broad range of surfaces for permanent, non-shrink repairs.
Not for consumer sale or use. For industrial/occupational use only. Light gray when mixed, helping blend with surfaces for consistent appearance. The performance of the Bondo brand. Fully paintable and stainable.
|Manufacturer||Bondo Home Solutions #ad|
8. Spray Max #ad
USC Spray Max 2k High Gloss Clearcoat Aerosol 2 PACK #adSpray Max #ad
- Unique nozzle delivers spray gun results. Pot life: 48 hours at 68 degree fahrenheit ambient temperature. Manufacture date on can. Dries to a high gloss finish.
Easy to use aerosol. Excellent weather and chemical resistance. Activate, shake and spray. 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish.
|Brand||Spray Max #ad|
|Manufacturer||Spray max #ad|
9. Bondo #ad
Bondo Fiberglass Resin, 0.9 Gallon, 00404 #adBondo #ad
- Use during the fill stage of the 3m body repair system. Sandable in less than 2 hours. Can be used alone or with fiberglass tape, cloth or mat. Includes bondo fiberglass resin liquid hardener for convenient, accurate mixing.
Sandable in less than 2 hours; Flash point: 93. 33 degrees_celsius; Fit type: Universal Fit. Can be used alone as a sealer. Great on large or small metal rust-outs. Great on large or small metal rust-outs.
Creates a strong and long lasting bond. Compatible with all paints including gel coat and marine paint. Can also be used as a sealer on damaged and rotted wood. Can be used alone or with fiberglass tape, cloth or mat. Creates a strong and long lasting bond. Can also be used as a sealer on damaged and rotted wood. For repairing, resurfacing and rebuilding a range of materials.