As an Amazon Associate I earn from qualifying purchases.
1. Intellitec #ad
INTELLITEC 0100055000 Battery Disconnect Relay #adIntellitec #ad
- The package length is 7. 62 centimeters. The package width is 7. 62 centimeters. Battery disconnect Relay 12 Volts 100 amp. The package height is 17. 78 centimeters.
2. Oak-Pine #ad
Oak-Pine 12V Bond Bistable Relay Module Car Modification Switch One Key to Start and Stop and Self-Locking #adOak-Pine #ad
- Quality assurance : use the songle genuine relay to control the load, and the load can be withstand at 250V 10A AC and 30V 10A DC;. Power : this product is available in 5V, 12V, 24V three power versions. Stability&safety : the relay module has a high-power voltage regulator to provide sufficient and stable voltage, and has sufficient heat dissipation holes to ensure stable and reliable operation of the product for a long time usage; it has anti-power reverse protection diode, and the short-time reverse power supply won’t do any damage to the product.
The relay module is equipped with terminal block and lead wire, which is more convenient to use; trigger can also be triggered by other sensor modules, as long as it is effective low power Flat trigger, the function has more extensions.
Large usage: our relay module is with tact switch as product test, directly check the stability of the product and the trigger can also be contact with external switch. Super performance : the bistable relay module adopt double-panel design PCB and use single-chip microcomputer to control, anti-interference is strong, will not be triggered by mistake, the performance is stable and reliable, the performance is far superior to CD4013.
3. LIVISN #ad
LIVISN DC 12V 10A 2-Channel Self-Latching Relay Module One-Button Bistable Switch One-Button Start Stop High Level Trigger #adLIVISN #ad
- With high power regulator tube to provide adequate and stable voltage, and have enough cooling holes to ensure that products for a long time stable and reliable work;.
Can also be used for other sensor modules to do the trigger, as long as the 5V or 12V high-level trigger are effective, the function has more expansion;. With anti-power protection reverse diodes, a short time to reverse the power of the product without any damage;.
Dual-panel design pcb; the use of stable and reliable chip to do control, stable and reliable performance, strong anti-interference. The use of high-quality goods relay control load, the product is equipped with a terminal block and lead, in the 250v 10a AC and 30V 10A DC load can withstand; trigger can also be an external trigger switch, more convenient to use;.
4. DZS Elec #ad
DZS Elec 12V 2 Channel High/Low Level Trigger with Optical Isolation Relay Module Fault Tolerant Design Load AC 0-250V/10A DC 0-30V/10A Circuit Switch Board #adDZS Elec #ad
- With fault tolerant design, even if the control line is broken, humanized terminals, the relay will not take any action. With green power light, red relay status indicator light, can directly reflect the current module working condition.
With patch optical isolation, strong drive ability and stable performance, the trigger current is 5mA. Can set high or low level trigger with jumper, to meet the demand of more trigger applications. Input voltage is 12v, the max load of interface is AC 250V/10, DC 30V/10A.
5. Omron #ad
Omron Relay G8JN-1C6T-F-R-DC12 12VDC 30 AMP Made in USA #adOmron #ad
- Contact termination: Plug In. Contact current Rating: 40 A. Contact form: spDT 1 Form C. Coil voltage: 12 VDC. Made in usa, omron electronics Inc-EMC Div.
6. MaySpare #ad
Marine In Rush 12VDC, Max 300A Continuous Duty Solenoid Relay Nickel-Plating For Golf Carts ,Winch #adMaySpare #ad
- Resistance is 14Ω, capacity is 102w, contacts:normally open no/ 12vdc WITH 2 COPPER POINT. Our coil roll is using 180℃ copper wire, Cover is Nickel-Plating, meet Environmental Plating Requirment, And Avoid Rusting, Shining.
Max transient current can be 300a, but continuous working Current recommend under 150 Amp/ WARRANTY: Life Long Warranty and Free Return and Full Refund.
Note: normally make 80a as working current, 50 min off -/ If u need a long working one, need Break 5 sec on, pls note us. Replaces:70-111224, one circuit: off - on, 1114534, 1114223, 1114208, 1114547/ bracket:straight;spst, 3635820, 1114218, Bracket mounting:Holes 5/16 x 19/32 2-13/64 on center.
7. EKYLIN #ad
E-Kylin DC 12V Electromagnetic Solenoid Valve Terminal Master Kill System, Car Wireless Remote Control Battery Switch Disconnect Latching Relay Anti-Theft #adEKYLIN #ad
- This is a more convenient car battery disconnect switch system that can remotely master kill your car power system to prevent the old car power drain or save the car from being stolen. No power leakage anymore, prolong your car battery life by 2-3 times.
You can even control it in your house. Remote receiver Standby Current is very low 00085a. Electromagnetic switch Max Current: 1000A, 000 Times. Just press the remote button - handy easy & simple! Come with nice silver remote control with distance upto 160 feet.
Comparing to tranditional battery switch, this remote control electromagnetic Battery Switch Disconnect allows you to move the trigger from under the hood to your hand so that you won't need to open the hood to turn on power every time.
We strongly recommend customers to install it in a professional car shop. Package includes: 1 x electromagnetic car battery switch, 1 x Remote Control, 1 x Remote Receiver, 4m x Wiring Cables, 1 x English Manual. Main switch Size:Height:3. 2", length:5. 8", lifetime of use: 100, please check the car hood space before purchase Unique from Linko-Tech Amazon Store. Universal for 12V Vehicle Power System. Installation need additional wires larger than 22AWG.
8. LIVISN #ad
LIVISN DC 12V 10A 4-Channel Self-Latching Relay Module One-Button Bistable Switch One-Button Start Stop High-Level Trigger #adLIVISN #ad
- The use of high-quality goods relay control load, the product is equipped with a terminal block and lead, in the 250V 10A AC and 30V 10A DC load can withstand; trigger can also be an external trigger switch, more convenient to use;.
Dual-panel design pcb; the use of stable and reliable chip to do control, stable and reliable performance, strong anti-interference. With anti-power protection reverse diodes, a short time to reverse the power of the product without any damage;.
With high power regulator tube to provide adequate and stable voltage, and have enough cooling holes to ensure that products for a long time stable and reliable work;. Can also be used for other sensor modules to do the trigger, as long as the 5V or 12V high-level trigger are effective, the function has more expansion;.
9. IRHAPSODY #ad
Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN SPDT Bosch Style Automotive Relay, 5 Pack 40/30 AMP 12 V DC Waterproof Relay and Harness #adIRHAPSODY #ad
- 12 awg tinned copper wires for pin 30, Pin 87, Pin 87a. 40 a / 30 a high switching capability. 12 v dc waterproof relay max 14 v. Nominal coil voltage: 12 v dc; coil power: 1. 8 w; coil resistance: 80 Ω; must operate voltage: 6~8 V DC; Must Release Voltage: 06~3.
6 v dc; maximum applied Voltage: 15. 6 v dc. Length: 5. 1 in. 16 awg tinned copper wires for Pin 85, Pin 86. Length: 5. 1 in. Excellent waterproof performance, high quality in any weather conditions.
|Warranty||ONE YEAR WARRANTY|