Top 9 Harmonic Balancer Pulley Tool – Jaw Pullers

As an Amazon Associate I earn from qualifying purchases.

1. OEMTOOLS

#ad

Includes 4 Forcing Rods, Adjustable 3-Jaw Puller Fits Most Late Model Vehicles, Forcing Screw Fits a 3/8” Square Drive, OEMTOOLS 25090 Harmonic Balancer Puller Kit

#ad
OEMTOOLS #ad - Product specifications: includes puller body, 4 pressure screw adapter rods 4", 6-1/2", 3 Wave Washers, 3-jaw Puller, 3 Jaw Retaining Pins, 5-13/32", and 7-13/32"; Blow-Molded Carrying Case. Easy to use: unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process.

For pressed-on harmonic balancers: harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt; Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers. Wide application: crankshaft harmonic balancer puller designed for use with model gm 2000 Generation II Cadillac 1988 - Newer, Ford 1995 - Newer, Chrysler 1990, Chevrolet Trucks 2003 - Newer, and Mitsubishi Eclipse 1995.

Instructions and storage case included: Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case; Easily take this harmonic balancer puller set from job to job.
BrandOEMTOOLS #ad
ManufacturerOEMTOOLS #ad
Height2 Inches
Length9.3 Inches
Width7.2 Inches
Part Number25090
Model25090
WarrantyOEMTOOLS Limited Lifetime

2. Z Whip

#ad

Z Whip LS LT Pro Series Harmonic Balancer Installation Tool Crank Pulley Install with Thrust Bearing and Hex Wrench Flats 1998-Current V8 LS1 LSX LS3 Vortec 5.3L 4.8L 5.7L 6.0L 6.2L LQ4 L76 LT1 LT4

#ad
Z Whip #ad - Simply thread this tool fully into the crank then tighten the nut until the harmonic balancer is into position. 3 4 5 small block chevy Also compatible with Engines that use a M16x2. 0 threaded Crank Bolt. Please remember to apply some oil to the threads before using.

Comes with 1ea high grade m16-2. 0 threaded stud with wrench flats, 2ea washers, 1ea thrust bearing, 1ea extended length nut, and 1ea protective hanger. We are an as9100d and iso 9001:2015 certified manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. We put the same quality into every part we produce. So this can be hung on your pegboard or a nail on the wall.

Compatible with all chevrolet gm ls & lt series v8 engines 1998-current gen. When you purchase z whip Parts you will always get the highest quality for your vehicle that you rightfully deserve. The hanger also keeps everything on the stud so you don't lose any of the pcs. Parts we produce fly at 30, 000 feet where failure is not an option. This will not work for 1991-1997 LT1 Gen 2 Engines.
BrandZ Whip #ad
ManufacturerZyxaxis Inc. #ad
Part Number99447321

3. ABN

#ad

ABN Universal Harmonic Balancer Puller & Installer 52-Piece Tool Kit – Master Balancer & Pulley Removal/Installation Set

#ad
ABN #ad - Easy storage: heavy-duty 13” x 9. 5” x 2. 5” 33cm x 24. 1cm x 6. 4cm plastic blow-molded carrying case for easy transportation, simple storage, and quick organization; Each slot has an embossed size labeling for easy identification. Versatile: also works on gear pulleys and steering wheels; bearing-centered circular 2/3-way and an assortment of metric and fractional bolts and adapters provide wide coverage; Fits L98 & LT series engines, GM LS1 with aftermarket 3-bolt style balancer; If your balancer has threaded drilled and tapped holes in the front to attach supplied pulling bolts to, it is compatible.

Practical: use the abn universal harmonic balancer puller & installer 52-Piece Tool Kit – Master Balancer & Pulley Removal/Installation Set to safely remove harmonic balancers and drive pulleys which are pressed fitted onto the crank shaft without damaging your vehicle.

Contents: package includes 1 puller shaft + 1 flanged nut + 1 puller plate bearing + 8 adapters + 11 washers + 10 black screw bolts + 20 silver screw bolts + 1 carrying case. Specifications: heavy duty 3/4" diameter forcing screw internally threaded to fit the eight adapters to install harmonic balancers; adapters m16 x 2. 0, 5/8-18, unf 3/8” x 1-1/2”, unf 1/4" x 2-1/2”, 1/2-20, 3/4-16, m8 x 1.25 x 65mm, unc 5/16” x 6”, 9/16-18, m14 x 1.5, unc 3/8” x 3”, 7/16-20; black screws m10 x 1. 5 x 35mm, m12 x 1.
BrandABN #ad
ManufacturerABN #ad
Height2.25 Inches
Length13 Inches
Weight8.51 Pounds
Width10 Inches
Part Number6595
Model4333088824

4. ABN

#ad

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

#ad
ABN #ad - Protect your crankshaft from failure: the abn long reach harmonic balancer installation Tool Pulley Set allows you to quickly and easily install replacement harmonic dampers into your vehicle; A harmonic balancer protects your vehicle from damaging vibrations that can wear down the life of your crankshaft and protects your crankshaft threads from stripping, making it important to install the harmonic balancer with precision and accuracy.

Contents: long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes; Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to corrosion. Fits your vehicle: designed for use on many late ford, and chrysler vehicles with V8 and V6 engines; Long reach thread sizes include M14x1.

5, m12x1. 5, gm, m12x1. 75, dodge, M16x2. 0 Easy to use: attach the pressure bearing screw nut onto the chosen jack screw; After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer; Continue tightening system into place with hand wrench not included and remove installer assembly; Always wear safety gear. Convenient storage: heavy-duty plastic blow-molded case provides convenient organization and easy transportation; The 10 x 5. 2 x 2. 8 inch 25.
BrandABN #ad
ManufacturerABN #ad
Height2.8 Inches
Length10 Inches
Weight1.5 Pounds
Width5.2 Inches
Part Number7429

5. BETOOLL

#ad

BETOOLL 50mm Crankshaft Crank Pulley Wrench Holder Tool Removal Holding Spanner kit for Honda and Acura Engines

#ad
BETOOLL #ad - Professional grade 50mm socket with offset design for removing/installing many Acura and Honda engine crank bolts. This socket is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt. Use with square socket driver. 1/2" square drive use with breaker bar. Designed with hardened chrome molybdenum steel construction. Backed by a lifetime replacement guarantee.
BrandBETOOLL #ad
Manufacturerszbrt #ad
Part NumberBET-HW3053
ModelBET-HW3053

6. 3mirrors

#ad

3mirrors Upgraded Harmonic Balancer Puller 551141 Crank Install Tool Compatible with GM 1997-Up LS1 / LS Engines Crank Pulley Installer

#ad
3mirrors #ad - The 2 small washers are: 16*40*5mm, and one end has a Hex head smaller than the bolt diameter, they are pretty strong. The nut is a custom heightened nut, which is twice the normal nut. New Upgraded! Compatible with all gm ls & lt series engines 1997-current Gen 3, 4, & 5.

Any product problems caused by the transportation process, please contact the seller in time to get a new replacement for free. It will be easier to twist with a wrench, and the wrench will not easily fall off. Easy job, tool threads into crankshaft and pushes the crankshaft pulley into position. Upgraded bolt strength is 12. 9, 16*45*4mm, which is easy to install and remove.

Good quality and worked perfect, Much safer than pulling on the balancer with a bolt. Thank you for your understanding! LS / LT Harmonic Balancer Install Tool. 109 steel upgraded manufacturing craft, add lubricating oil will be more perfect when used! Package: Package: 1 bolt with HEX END, the screws and the stud rod are smooth connection and not easy to get stuck, 1 heighten nut, 2 THICK washers.
Brand3mirrors #ad
Manufacturer3mirrors #ad
Weight0.78 Pounds
Part NumberT003GM03

7. E-cowlboy

#ad

For Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts

#ad
E-cowlboy #ad - Also 4 cyl: 1983-1995 22re, 4. 3 v8, 4. 0 v8, 4. 0 v6, 4. 7 v8; toyota 1996 and later: 3. 0 v6, 3. 3 v6, 3. 0 v6, 1995-2004 2rz & 1995-2004 3rz. Round edge with precision fit hole - small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench.

Keep crank pulley still - prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.

Package included - 1 crankshaft damper pulley holding holder tool and 2 crank bolts. 100% satisfaction guarantee - if you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, no questions asked money back guarantee with 1 year’s warranty. Fitment information - work for lexus 1990 and later: 3. 0 l6, 3. 3 v6, 4. 7 v8.
BrandE-cowlboy #ad
ManufacturerBird's wings #ad
Height2.1 Inches
Length7 Inches
Width4.5 Inches
Part NumberSL64300

8. E-cowlboy

#ad

LS1 Harmonic Balancer Installer Crank Pulley Installer Crankshaft Installation Tool For GM LS1/LS Engines 1997~Current

#ad
E-cowlboy #ad - Threaded rod is hardened 94 Rockwell and hardware is grade 109. Upgrade design — simply thread the tool into the crankshaft until it seats, then tighten the nut down until the pulley is seated.

High precision and hardness to provide a much longer service life. Professional & sincere Service allows you to take no risks to purchase in E-cowlboy! Support 12 months’ Warranty. This is a must have for engine swaps or upgrading the balancer. 100% satisfaction guarantee — if you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Special features — includes 1×threaded rod, 1×flange Nut and 2×Washers. Superior quality — premium grade heat-treat heavy duty steel, durability, galvanized steel nuts and aluminum washers, anti-corrosion and anti-rust. Great compatibility — works on all gm ls & LT series engines 1997-current Gen 3, 4, & 5.
BrandE-cowlboy #ad
ManufacturerE-cowlboy #ad
Part NumberE-cowlboy

9. ICT Billet

#ad

ICT Billet LS LT Harmonic Balancer Install Tool LS1 LT1 Pulley Installation 551141Z

#ad
ICT Billet #ad - Simply thread the tool into the crankshaft until it seats, then tighten the nut down until the pulley is seated. Package includes: 1 grade 8. 8 threaded stud, 2 washers, & 1 flange nut. Tool threads into crankshaft and pushes the crankshaft pulley into position. Compatible with all gm ls & lt series engines 1997-current Gen 3, 4, & 5. Ls / lt harmonic Balancer Install Tool.
BrandICT Billet #ad
ManufacturerICT Billet #ad
Part Number551141Z