Top 9 Fresh Water Tank – RV Freshwater Tanks & Inlets

As an Amazon Associate I earn from qualifying purchases.

1. A.A

 #ad

BPA Free 30 Gallon, A.A 30 Gallon RV Fresh/Gray Water Tank 34" x 18" x 12"

#ad
A.A #ad - Stain, corrosion and rust resistant features make them ideal for replacement or OEM installation on RVs, horse trailers or marine products. Non-pressurized Tank - The tank must be vented. These rotational molded fresh water tanks are made from a high quality durable FDA approved polyethylene material. This 30 gallon water tank measures 34" x 18" x 12" not including fittings. One piece seamless construction - No Seams to burst. All tanks come with 1 1. 25" water fill inlet and 3 3/8" NPT connections.
BrandA.A #ad
ManufacturerAutomotive Authority LLC #ad
Height12 Inches
Length34 Inches
Width18 Inches
Part NumberFWT-RV

2. classAcustoms

 #ad

Class A Customs 75 Gallon Fresh Water Holding Tank NSF/FDA Approved BPA Free T-7500

#ad
classAcustoms #ad - Do not hook garden hose to tank use a fill dish. Built-in fitting: two 1½ " dia screw in balloon fitting threaded female - NPT Standard fitting will be closed, to use remove inner membrane with razor knife TWO ½ " Dia screw in fittings threaded female - NPT Standard.

Non-pressurized tank: you will need to vent this tank to use it, letting air in and out during use. Nsf paperwork readily available and NSF logo molded into the tank. 75 gallon capacity fresh drinking water safe holding tank manufactured by Class A Customs - NSF FDA Approved & BPA FREE - Fresh & Drinking Water Safe. Great extra water storage in rv, smaller food vendors and portable hand washing sinks.

Water tank measurements: 505” longest length not including fittings x 17. 5” x 19. 5” rotate tank to change height or width Average thickness 7/32” +/- +/-. 25" on each measurement. Class a customs manufactures this item here in the US in Elkhart, pop-up camper, concession trailers, off road vehicles, hot dog carts, Indiana.
BrandclassAcustoms #ad
ManufacturerClass A Customs #ad
Part NumberT-7500

3. Class A Customs

 #ad

Class A Customs 21 Gallon Water Tank & Plumbing Kit & WFCO 12 Volt Pump T-2100-BPK-12WFCO

#ad
Class A Customs #ad - 21 gallon capacity fresh drinking water safe holding tank manufactured by class a customs - nsf fda approved & bpa free - fresh & drinking Water Safe WATER TANK MEASUREMENTS 34” not including fittings x 9” x 16” rotate tank to change height or width Average thickness 7/32” +/-.

25" on each measurement. Section of 1 ¼” id 1 ⅜” OD Fill Hose. Do not hook garden hose to tank you will explode the tank, use a fill dish. Tank built-in fittings 2 two 1½ " dia screw in balloon fitting threaded female - npt standard fitting will be closed, to use remove inner membrane with razor knife 2 TWO ½ " Dia screw in fittings threaded female - NPT Standard. Artis 12 volt fresh water pump model # pds3b-130-1260e: nsf approved materials 3. 0 gpm / 7.

0 amp draw @ 50 psi / inlet / on demand pump / self-priming / Shut Off: 60 PSI / Outlet ports ½ M-NPTS. Section of ½” id vent/Draw Hose 1 One 5ft. Basic plumbing kit includes 2 two ½” hose barb to ½” male pipe thread adaptor 4 four ½” hose clamp 1 one 1 ¼” hose barb to 1 ½” male pipe thread adaptor 2 two 1 ½” hose clamps 1 one 1 ½” Male Pipe Thread PVC Male Adaptor 1 One 5ft. Non-pressurized tank you will need to vent this tank to use it, letting air in and out during use.
BrandClass A Customs #ad
ManufacturerclassAcustoms.com #ad
Height8 Inches
Length39 Inches
Weight30 Pounds
Width16 Inches
Part Number21TK-BPK-12WFCO
ModelT-2100

4. Class A Customs

 #ad

Class A Customs 30 Gallon Water Holding Tank NSF Approved T-3000

#ad
Class A Customs #ad - Non-pressurized tank: you will need to vent this tank to use it, letting air in and out during use. Do not hook garden hose to tank use a fill dish. Nsf paperwork readily available and NSF logo molded into the tank.

Built-in fitting: two 1½ " dia screw in balloon fitting threaded female - NPT Standard fitting will be closed, to use remove inner membrane with razor knife TWO ½ " Dia screw in fittings threaded female - NPT Standard. 30 gallon capacity fresh drinking water safe holding tank manufactured by Class A Customs - NSF FDA Approved & BPA FREE - Fresh & Drinking Water Safe. Class a customs manufactures this item here in the US in Elkhart, concession trailers, pop-up camper, Indiana.

Water tank measurements: 34 1/2” longest length not including fittings x 12” x 17 1/2” rotate tank to change height or width Average thickness 7/32” +/- +/-. 25" on each measurement. Great extra water storage in rv, off road vehicles, hot dog carts, smaller food vendors and portable hand washing sinks.
BrandClass A Customs #ad
ManufacturerclassAcustoms.com #ad
Height12 Inches
Length34.5 Inches
Weight18 Pounds
Width17.5 Inches
Part Number30-gal
ModelT-3000-1

5. Class A Customs

 #ad

Class A Customs 46 Gallon Water Holding Tank NSF Approved T-4600

#ad
Class A Customs #ad - Nsf paperwork readily available and NSF logo molded into the tank. Class a customs manufactures this item here in the US in Elkhart, hot dog carts, off road vehicles, pop-up camper, Indiana. Great extra water storage in rv, concession trailers, smaller food vendors and portable hand washing sinks.

Built-in fitting: two 1½ " dia screw in balloon fitting threaded female - NPT Standard fitting will be closed, to use remove inner membrane with razor knife TWO ½ " Dia screw in fittings threaded female - NPT Standard. Non-pressurized tank: you will need to vent this tank to use it, letting air in and out during use.

Water tank measurements: 42” longest length not including fittings x 14” x 18” rotate tank to change height or width Average thickness 7/32” +/- +/-. 25" on each measurement. Do not hook garden hose to tank use a fill dish. 46 gallon capacity fresh drinking water safe holding tank manufactured by Class A Customs - NSF FDA Approved & BPA FREE - Fresh & Drinking Water Safe.
BrandClass A Customs #ad
Manufacturerclassacustoms.com #ad
Height14 Inches
Length42 Inches
Weight49 Pounds
Width18 Inches
Part Number46-gal
ModelT-4600

6. Class A Customs

 #ad

Class A Customs 30 Gallon Water Tank & Plumbing Kit & WFCO 12 Volt Pump T-3000-BPK-12WFCO

#ad
Class A Customs #ad - Artis 12 volt fresh water pump model # pds3b-130-1260e: nsf approved materials 3. 0 gpm / inlet / shut off: 60 PSI / 7.0 amp draw @ 50 psi / self-priming / on demand Pump / Outlet ports ½ M-NPTS. Basic plumbing kit includes 2 two ½” hose barb to ½” male pipe thread adaptor 4 four ½” hose clamp 1 one 1 ¼” hose barb to 1 ½” male pipe thread adaptor 2 two 1 ½” hose clamps 1 one 1 ½” Male Pipe Thread PVC Male Adaptor 1 One 5ft.

30 gallon capacity fresh drinking water safe holding tank manufactured by class a customs - nsf fda approved & bpa free - fresh & drinking water safe WATER TANK MEASUREMENTS 34 ½” not including fittings x 12” x 17 ½” rotate tank to change height or width Average thickness 7/32” +/-. 25" on each measurement.

Section of 1 ¼” id 1 ⅜” OD Fill Hose. Section of ½” id vent/Draw Hose 1 One 5ft. Do not hook garden hose to tank you will explode the tank, use a fill dish. Tank built-in fittings 2 two 1½ " dia screw in balloon fitting threaded female - npt standard fitting will be closed, to use remove inner membrane with razor knife 2 TWO ½ " Dia screw in fittings threaded female - NPT Standard. Non-pressurized tank you will need to vent this tank to use it, letting air in and out during use.
BrandClass A Customs #ad
ManufacturerclassAcustoms.com #ad
Height12 Inches
Length34.5 Inches
Weight18 Pounds
Width17.5 Inches
Part Number30TK-BPK-12WFCO
ModelT-3000

7. classAcustoms

 #ad

Class A Customs 55 Gallon Fresh Water Holding Tank NSF/FDA Approved BPA Free T-5500

#ad
classAcustoms #ad - Built-in fitting: two 1½ " dia screw in balloon fitting threaded female - NPT Standard fitting will be closed, to use remove inner membrane with razor knife TWO ½ " Dia screw in fittings threaded female - NPT Standard.

55 gallon capacity fresh drinking water safe holding tank manufactured by Class A Customs - NSF FDA Approved & BPA FREE - Fresh & Drinking Water Safe. Class a customs manufactures this item here in the US in Elkhart, concession trailers, off road vehicles, hot dog carts, Indiana. Nsf paperwork readily available and NSF logo molded into the tank. Do not hook garden hose to tank use a fill dish.

Water tank measurements: 37. 5” longest length not including fittings x 17. 5” x 19. 5” rotate tank to change height or width Average thickness 7/32” +/- +/-. 25" on each measurement. Great extra water storage in rv, pop-up camper, smaller food vendors and portable hand washing sinks. Non-pressurized tank: you will need to vent this tank to use it, letting air in and out during use.
BrandclassAcustoms #ad
ManufacturerClass A Customs #ad
Part NumberT-5500

8. Class A Customs

 #ad

Class A Customs 42 Gallon Water Holding Tank NSF Approved T-4200/635

#ad
Class A Customs #ad - Non-pressurized tank: you will need to vent this tank to use it, letting air in and out during use. 42 gallon capacity fresh drinking water safe holding tank manufactured by Class A Customs - NSF FDA Approved & BPA FREE - Fresh & Drinking Water Safe.

Nsf paperwork readily available and NSF logo molded into the tank. Do not hook garden hose to tank use a fill dish. Class a customs manufactures this item here in the US in Elkhart, concession trailers, off road vehicles, hot dog carts, Indiana. Great extra water storage in rv, pop-up camper, smaller food vendors and portable hand washing sinks. Water tank measurements: 27 1/2” longest length not including fittings x 15 1/4” x 22 1/2” rotate tank to change height or width Average thickness 7/32” +/- +/-.

25" on each measurement. Built-in fitting: three 1½ " dia screw in balloon fitting threaded female - NPT Standard fitting will be closed, to use remove inner membrane with razor knife TWO ½ " Dia screw in fittings threaded female - NPT Standard.
BrandClass A Customs #ad
ManufacturerClass A Customs #ad
Part NumberT-4200/635

9. Barker Manufacturing Company

 #ad

Barker Manufacturing Company Barker 11916 Plastic Water Tank, 20 Gallon

#ad
Barker Manufacturing Company #ad - Item package Weight : 14 pounds. 32 inch x 12 inch x 12 inch. Package dimension : 24 inches L x 24 inches W x 24 inches H. Country of origin: uNITED STATES.
BrandBarker Manufacturing Company #ad
ManufacturerBarker #ad
Height12.5 Inches
Length36.6 Inches
Weight14 Pounds
Width12.1 Inches
Part Number11916
Model11916
WarrantyN/A