Top 9 ENGINEER Pliers Made in Japan – Slip-Joint Pliers

As an Amazon Associate I earn from qualifying purchases.

1. ENGINEER

#ad

Heavy Duty Multi-function combi Gripping Pliers / Screw Extractors non-slip jaws for quick removal of damaged screws. Made In Japan. Engineer pz-59 neji-saurus RX

#adENGINEER #ad - Much easier to use than other screw removal tools - just grip & twist the damaged screw out! Quickly extract damaged screws, specialised screws - even tamper proof screws. Innovative inter-meshed jaw teeth allows a firm grip on the thinnest of materials. Specially shaped & uniquely serrated gripping jaws - unlike other pliers, these screw pliers won't slip.

Brand	ENGINEER #ad
Manufacturer	engineer inc. #ad
Height	0.75 Inches
Length	8.03 Inches
Weight	0.66 Pounds
Width	2.09 Inches
Part Number	PZ-59
Model	PZ-59

2. ENGINEER

#ad

Professional Grade, Made in Japan, ESD Safe with Hardened Carbon Steel Jaws, ENGINEER NS-04 Precision Side Cutters Micro Nippers

#adENGINEER #ad - Angle opening adjuster - sets how wide jaws open when grips released enhances productivity + less hand fatigue wrt repetitive cutting work. Constructed from heat treated carbon steel for outstanding cutting performance & durability. Compact sized - ideal for precise PCB & electronics work, hobbyists, craft work etc. Esd safe comfort grips, constructed from oil resistant thermoplastic elastomer. Cutting edges specially designed for flush cutting of electronic components, copper wire, and soft component lead wires.

Brand	ENGINEER #ad
Manufacturer	Engineer Inc. #ad
Height	0.43 Inches
Length	1.97 Inches
Weight	0.15 Pounds
Width	4.72 Inches
Part Number	NS-04
Model	NS-04

3. ENGINEER

#ad

45 Degree Angled Jaws Cutting Pliers for Quick & Easy Removal of ICS DIL DIP SIP Packages etc..Made in Japan, ENGINEER NZ-05 Full Flush Cut Chip Cutters

#adENGINEER #ad - Comfort cushioned grips, ESD compliant - made from oil resistant elastomer strap holes at end of handles. Supplied with 1. 5mm hex key wrench as standard accessory to set the jaw opening angle adjuster. Jaw opening angle adjuster - sets how wide jaws open when grips released enhances productivity & less hand fatigue for repetitive cutting work. Jaw end angle set at 45 degrees perfect for snipping components with the jaws positioned flush to a PCB circuit board. Heat treated carbon steel for excellent cutting performance & durability.

Brand	ENGINEER #ad
Manufacturer	engineer inc. #ad
Height	0.43 Inches
Length	4.84 Inches
Weight	0.15 Pounds
Width	2.01 Inches
Part Number	NZ-05
Model	NZ-05

4. Engineers

#ad

Made In Japan. Engineer pr-15, Long Nose Pliers 125mm With Integral Wire Cutting Jaws

#adEngineers #ad - Wire cutting rear jaws cutting capacity: 2. 6mm solid copper wire, 2mm stranded copper wire, 1. 5mm steel wire. Made by a long established and highly regarded Japanese precision tool company. Constructed from s58c Carbon steel hardness: HRC58±4.

Brand	Engineers #ad
Manufacturer	ENGINEER #ad
Height	0.39 Inches
Length	5.59 Inches
Weight	0.22 Pounds
Width	2.01 Inches
Part Number	PR-15
Model	PR-15

5. ENGINEER

#ad

Made in Japan, ENGINEER PS-03 Miniature Needle Long Nose Pliers 141mm, Precise Jaws with no serration inside

#adENGINEER #ad - Esd safe comfort grips, constructed from oil resistant thermoplastic elastomer. High quality compact, fine needle nose pliers with half round, non-serrated jaws. Spring loaded handles to aid repetitive work helps avoid hand fatigue. Ideal for forming, precision PCB/electronics work, lab/science work, crafts etc.

Brand	ENGINEER #ad
Manufacturer	Engineer Inc. #ad
Height	0.43 Inches
Length	5.55 Inches
Weight	0.15 Pounds
Width	2.17 Inches
Part Number	PS-03
Model	PS-03

6. ENGINEER

#ad

ENGINEER PZ-56 Screw Removal Pliers, Made in Japan, unique vertically serrated jaws to grip damaged screws with no slippage, Slip Joint

#adENGINEER #ad - Specially shaped & uniquely serrated gripping jaws - unlike other pliers, these screw pliers won't slip or slip off. Top jaws extract screws with head diameters 3mm~10mm & the side jaws extract screws with head diameters 5. 5mm~14mm. Slip-joint pliers with unique jaws designed to quickly extract damaged screws, specialised screws - even tamper proof screws! Much easier to use than other screw extracting products - just grip & twist the damaged screw out. Constructed from crv carbon steel hardened to 56HRC±2 with a rust resistant chrome plated finish.

Brand	ENGINEER #ad
Manufacturer	Engineer Inc. #ad
Height	0.59 Inches
Length	6.89 Inches
Weight	0.41 Pounds
Width	1.89 Inches
Part Number	PZ-56
Model	PZ-56

7. ENGINEER

#ad

Resistors, for quick removal of PCB surface mount components such as ICs, capacitors etc. Made in Japan. ENGINEER nz-03, SMT / SMD chip cutters

#adENGINEER #ad - Supplied with 1. 5mm hex key wrench as a standard accessory to set the jaw opening angle adjuster. Specialised cutters, designed for the quick & easy removal of SMD / SMT components from PCBs. Jaw opening angle adjuster - sets how wide jaws open when grips released enhances productivity & avoids hand fatigue for repetitive cutting work. Slender & compact jaw design - perfect for densely populated circuit boards. Esd compliant comfort cushioned elastomer grips oil resistant.

Brand	ENGINEER #ad
Manufacturer	engineer inc. #ad
Height	0.43 Inches
Length	4.8 Inches
Weight	0.14 Pounds
Width	2.01 Inches
Part Number	NZ-03
Model	NZ-03

8. ENGINEER

#ad

Long Nose Pliers 160mm with Integral Wire Cutting Jaws. Made in Japan. ENGINEER pr-16, Green

#adENGINEER #ad - Equipped with wire cutting jaws cutting capacity: 2. 6mm solid copper wire, 2mm stranded copper wire & 1. 5mm steel wire. Constructed from s58c carbon steel hardness: HRC58±4. Made in japan ROHS compliant. Multi-purpose 150mm long nose pliers with serrated jaws for firm gripping.

Brand	ENGINEER #ad
Manufacturer	engineer inc. #ad
Height	0.39 Inches
Length	6.3 Inches
Weight	0.29 Pounds
Width	2.17 Inches
Part Number	PR-16
Model	PR-16

9. ENGINEER

#ad

Cutting pliers, Made in Japan, ENGINEER NK-26 153mm Diagonal nippers

#adENGINEER #ad - With coiled spring. With opening angle adjuster / stopper. Made of high carbon steel. Japanese precision cutter with wire stripping holes, dia 1. 2mm & 1. 6mm.

Brand	ENGINEER #ad
Manufacturer	Engineer Inc. #ad
Height	0.39 Inches
Length	2.17 Inches
Weight	0.26 Pounds
Width	6.02 Inches
Part Number	NK-26
Model	NK-26