Top 9 Charge Controller Solar – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. Renogy

#ad

Renogy Wanderer 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Regulator Compatible with Bluetooth Module

#ad
Renogy #ad - Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position.

Integrated rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy BT smartphone app. Power source Type: Solar-Powered. Backlit lcd screen displays system operation, diverse load control, and error codes. Compact in size makes it easy to install virtually anywhere. Optimized for a 12v/24v system; deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. Then secure each cable by rotating the screws clockwise CW to the closed position.

Smart 4-stage pwm charging bulk, and equalization increases battery life and improves system performance. Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW. Integrated 5v 2a usb ports to charge USB devices. Capable of charging over-discharged lithium batteries. Intelligent protection against reverse polarity, short-circuit, overcharging, Boost, Float, and reverse current.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.1 Inches
Length4.7 Inches
Width3 Inches
Part NumberCharge Controller
ModelWanderer 10 Amp 12V/24V
Warranty1-year material warranty

2. Binen

#ad

20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display

#ad
Binen #ad - 20a solar charge controller : binen solar charger controller are ul 1741 certified, the solar charger controller compatibility with 12V 24V system. Multiple protection functions: binen solar controller has short-circuit protection, over-load protection. Lcd display: comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, industrial, suitable for home, commercial etc.

Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, once the voltage of the battery drop below 8V, AGM, it is not suited for nickel hydride, or other batteries. For protecting the lifespan of your battery, GEL, lithium, Liions, the solar controller will turn off automatically. Dual usb output 5V/2. 5a max, to support mobile phone chargeing.

Fully 3-stage pwm charge management, open-circuit protection, reverse protection, improve system efficiency and prolong the life span of the battery. Easy to install and operate: the charge controller should connect the battery first, then the solar panel, low heat production. Note: the charge controller will heat up when it is running. Please be careful to install the charger controller on a flat, and finally the load! The disassembly sequence is contrary to the wiring order. Dual mosfet Reverse current protection, well-ventilated place.
BrandBinen #ad
ManufacturerBinen #ad
Weight0.37 Pounds
Part Number4332694907

3. EPEVER

#ad

Lithium Batteries and Load Timer Setting, 520W/1040W for Lead-Acid, 40 amp Negative Grounded Solar Charge Controller MPPT Max Input 100V, EPEVER 40A MPPT Solar Charge Controller 12V 24V Auto

#ad
EPEVER #ad - It protect the battery from being over-charged by the solar modules and over-discharged by the loads. Mppt controller 40a with blackligh LCD screen for displaing system information and working condition. Multiple load control method,.

Negative ground controller featuring advanced mPPT technology with high tracking efficiency up to 99. 5% and peak conversion efficiency of 98%. Auto identifying 12V/24V DCsystem voltage. Also compatible with various Deep Cycle battery options: Sealed, Gel, Flooded and Lithium. Mppt charge controller protection built-in against reverse polarity, over-discharging, overcharging, overload, short-circuiting, and reverse current.40a solar charge controller charging process has been optimized for long battery life and improved system performance.

It includes a 4-stage battery charging Bulk, Boost, Float, and Equalization and temperature compensation increase your battery life and improve your system's performance. Die-cast aluminum design allows for efficient heat dissipation. Solar controller mppt support pc software, app and mt-50 Maximizing the energy from solar panels to charge your system.
BrandEPEVER #ad
ManufacturerEPEVER #ad
Weight4.19 Pounds

4. EEEKit

#ad

Multi-Function Adjustable LCD Display with Timer Setting On/Off Hours, EEEKit 30A Solar Charge Controller, Dual USB Port Solar Panel Battery Intelligent Regulator, 12V24V 30A

#ad
EEEKit #ad - Intelligentbuild-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out. Reliable protectioneeekit solar charge regulator provides over-current protection, short-circuit protection, low voltage and overcharge protection, inverse connection protection, a reliable protector for your devices.

Easy to usethe charge controller should connect the battery first, then the solar panel, and finally the load! You can change the settings by the simple one-button operation. Dual usb 5v/3a output ports support mobile phones, tablet PCs or other devices that require 5V voltage. Wide compatibilitythe solar charger controller with 30a rated discharge current is compatible with 12V or 24V system automatically, suitable for lead-acid batteries: OPEN, AGM, GEL.

The solar controller will turn off automatically once the voltage is too low. Functional lcd displayintuitive lcd display that can clearly indicate the status and data is able to switch modes and parameter configuration, suitable for home, commercial, industrial, etc.
BrandEEEKit #ad
ManufacturerEEEKit #ad
Height2.5 Inches
Length7 Inches
Width13.5 Inches
Part NumberH026100-E008135338

5. SolarEpic

#ad

EPEVER MPPT Solar Charge Controller 40A 150V PV Solar Panel Controller Negative Ground W/ MT50 Remote Meter + Temperature Sensor PC Monitoring CableTracer4215BN

#ad
SolarEpic #ad - This 40 amp mppt solar panel charger works with 600w solar panel on 12v battery system and 1200w on 24V Battery. 150v max pv input allow this charge controller handles more Solar Panels Wiring in Series to minimize PV current, 5 x 12V Solar Panel Connecting in Series will be applicable.

Rs-485 communication bus interface and standard MODBUS interface available to meet various communication requirements, Temperature Sensor and PC monitoring Cable Attached. Negative grounding mppt solar charge controller tracer4215bn, the Advanced MPPT Control Algorithm makes this 40 Amp MPPT Controller Tracking Efficiency higher than 99.

5%. Work with all lead acid batteries, sealed AGM GEL and Flooded Battery, User mode allows buyer setting their own charging parameters. Max solar panel 1560w, multiple load mode allow you set the load on/off in different situation. A solid state relay is recommended if you are using a Power Inverter.
BrandSolarEpic #ad
ManufacturerEpsolar #ad
Weight4 Kilograms
ModelTracer4215BN-MT50
WarrantyWe offer 2 years limited warranty

6. ZEALLIFE

#ad

ZEALLIFE Solar Panels Charge Controller, 8A Battery Regulator for 12V Solar Battery Charger, Solar Battery Maintainer and 12 Volt Batteries Power Kit Safe Protection

#ad
ZEALLIFE #ad - The controller needs to be connected to a battery to work. Advantage 1: it will turn off automatically at night, and won’t consume battery power. It is suitable for 12V rechargeable batteries. Easy to monitor the led indicator lights:the solar controller integrates two LED lights, green fully charged and yellow charging.

In order to lengthen its service life, please do not overload. Apply to 12v solar panels:the 8a solar controller is used only for 12V solar panels and 12V batteries. Quick and easy connection:this solar charge controller uses SAE plugs for easy use and access to solar panels, batteries and loading equipment. The maximum input of solar energy is 130w:the maximum power of solar panels is130W, the maximum voltage 22V, and the maximum current 8A. Advantage 2: if there is connection errors,it will not be damaged.

The product also provides overcharge, overload protection, over-discharge, as well as short-circuit and reverse-connection protection. The solar panels can convert light energy into electric energy stored in batteries which will be protected by the solar controller. Users don't have to worry about positive + and negative -. All-round protection :the product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection.
BrandZEALLIFE #ad
ManufacturerZEALLIFE #ad
Height3.9 Inches
Length4.7 Inches
Weight5.9 ounces
Width1.5 Inches
Part NumberSolar Panels Charge Controller 8A
ModelSolar Panels Charge Controller 8A

7. GHB

#ad

GHB 20A 12V 24V Solar Charge Controller Auto Switch LCD Intelligent Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation

#ad
GHB #ad - Kindly suggest to use standard 11-15 AWG wire to connect with terminals perfectly. Lcd screen display >> this solar panel charger controller with lcd to display all parameters, the LCD has rich contents, display better, more clear, the users can intuitively know the working condition of the controller. Fully automatic >> this solar panel regulator with output switch, intelligent control, otherwise, easy to operate, to connect the controller and the battery by cables with the right polarity.

To connect your load and the cables with the right polarity and then connect with the load output port of the controller. Rated discharge current >> 20a; usb output voltage: 5v; total usb output current: 3a; dc output voltage: 12v. The battery indicator light on the controller will be on if successfully connected, to check and reconnect. Pay special attention to + - polarity to avoid reversed connection, otherwise, your load may be damaged. Power-efficient >> microcontroller digital accuracy, the arrow between the panel icon and the battery icon will flashe fastly, it will be slow flashed, will stop charging, when it's charging, when the battery was a full charge, the function of the controller is to protect the voltage overshoot and discharge.

The lcd display is with built-in energy-saving backlight LCD, more beautiful, more modern and more power-efficient. A key to open and close the load. Available for DC lamp and phone charging. Protection functions >> overload and short circuit protection, Over-charging protection, Lightning protection, Under-voltage protection, Reverse Polarity protection charge controllers for solar panels.
BrandGHB #ad
ManufacturerSmile&Satisfaction #ad
Height1.18 Inches
Length5.12 Inches
Width3.94 Inches
Part Number43237-2

8. PowMr

#ad

5A Waterproof Solar Charge Controller 6V 12V Auto, 5 amp Solar Panel Charging Regulator IP67 Waterproof 24Hours Load on for Lead-Acid AGM Gel Seal Foolded Battery

#ad
PowMr #ad - Battery voltage: 6v / 12v auto; rated charge & discharge current: 5A; Maximum power of solar panel: 30W for 6V battery, or 60W for 12V battery. Mini size solar controller waterproof for small power system, IP67 Waterproof Rating make it suit for Outdoor Use. Prevent the battery from over charging, over discharging and Reverse discharging to solar panel during nights. Ip67 waterproof rating make it suit for Outdoor Use like: Boat, water pump, Control landscape Lights and Water Feature. Easy to install and operate; Load On 24 Hours; Smart PWM technology, high efficiency.
BrandPowMr #ad
ManufacturerY-SOLAR #ad
Height0.49 Inches
Length0.19 Inches
Weight0.07 Pounds
Width0.19 Inches
Part Number5A-12V
Model5A-12V

9. PowMr

#ad

Max 48V 1560W Input Adjustable Parameter LCD Display Current/Capacity and Timer Setting ON/Off with 5V Dual USB, PowMr 60a Charge Controller, Solar Panel Charge Controller 12V 24V

#ad
PowMr #ad - Our email: [email protected] Com. This 60a charge controller compatibility with 12v and 24v system. Pwm charge controller protection - dual mosfet reverse current/ over heat /Under-voltage discharge discharge / open-circuit / short-circuit / over-load/ over-charging protection.

Fully 4-stage pwm charge boost, equalization, abs, 12v780w / 24V1560W input, Float, Dual USB can give your electronic product max 5V 2A. Backlight lcd display pv/ battery/ load charge and discharge parameter. Notes: for any reason you are unsatisfied with our product, just feel free to contact support for exchange or refund. Load should be DC. 12 months honor warranty from powmr and 24hrs after service. More safe using for home, industrial, commercial etc.

For protecting the lifespan of your battery, the solar controller will turn off automatically. Adjustable floating voltage/ LVD/ LVR/ Load Timer according needs for this charge controller. This solar charge controller fit for lead-acid batteries open, AGM, once the voltage of the battery drop below 8V, GEL with mutiple load timer. Add feature: charge and Discharge Current, Charge and Discharge energy recording function.
BrandPowMr #ad
ManufacturerPowMr #ad