As an Amazon Associate I earn from qualifying purchases.
CocoMocart #ad - Fuel line:1/4 inch inside diameter 064 cm and 1/3 inch outside diameter 08cm；hose clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 2/5-inches.
The fuel lines are oil resistant, cold-resistant and ethanol tolerance;Custom Extra long 9. 8 foot length 3m can be cut to size for all your applications.
IZOKEE #ad - Wide applicationfits selected briggs & stratton, simpson, lawnmower, John Deere, Husqvarna, Stens, Gravley, kubota engines that use this type filter for motorcycle, Kohler, Oregon, Craftsman, kawasaki, power equipment and small engines ect. Hose clampsmade of 65mn spring Steel, durable and can be reused.
The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Fuel filters and hose clamps are required for the use of fuel line.
Wall thickness is 2. 94mm. Upgraded setthe izokee package includes 6 feet 1/4" id fuel line; 2 x 1/4" in-line fuel filters; 10 x 2/5" id hose clamps. The dimensions of the various components within the kit are 100% compatible! 3-layer thickened fuel linethe fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer.
KeeYees #ad - Durable and sturdy, corrosion resistance. It is more convenient to tailor and use according to your length needs. Braided nylon sandwich design. In addition, there are 30 Pcs reliable hose clamps in the package. Also there is a about 9 inch 23cm ruler at the box, which can roughly measure the length of the fuel line hose.
Suitable for conveying gasoline, gas, diesel, Cars, fuels in Motorcycles, Lawn Mowers, bio-diesel, Marine Boat Outboard.
Please pay attention to select the correct inner diameter size. It is difficult for leaks to occur. This helps you fix the position and further prevent liquid leakage. Wide application keeyees fuel line hose is universal. The clamps are springy, nice construction and hold well. Clever packag design similar to the design of a tissue box, you can take out the fuel line in the box according to your needs, then cut it.
uxcell #ad - Easy to tighten since the bolt is out away from the clamping surface. Application - the hose clamps are used for fastening and sealing of interfaces such as power equipment fuel lines, various mechanical equipment, air hose tube, fire-fighting, silicone vacuum hose, machine tools, water pipe, etc.
Package content - 10pcs x spring band clamp. Note - please ensure the inner diameter of clips you'll purchase is less than your hose outer diameterabout 1 mm.
Simachine #ad - Zinc plated Band And Screw. Clamps. Standard most commonly and suitably being used on coolant, oil, fuel, vacuum, and emission systems. Clamps; 11x 5/16 in. Professional grade Hose Clamps; Non-Perforated Rolled Edge Band. Clamps ; 11x 3/8 in. Package include: 11x 1/4 in.
Zemoner #ad - It is more durable than most products on the market. Thickened tube wall ◀ wall thickness is 2. 94mm. You can use them directly without additional purchases. Oil resistant, cold-resistant and ethanol tolerance.
Worry-free combination ◀ the package includes 3. 28 feet id 1/4” inch fuel line; 5 x Hose Clamps. Clamps are sturdy, strong and reliable. Wide application ◀ for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors snow blowers dirt bikes and just about all small engines.
Tight clamping force prevents liquid leakage. The dimensions of the two parts are compatible with each other. Long service life ◀ due to the high-quality nylon material, the average service life can reach 5 years. Hose clamps ◀ made of 65mn spring steel. The clip is very firm, generally just use pliers to open the gap.
NEW DAFU #ad - Wall thickness is 3mm:contains 3 layers of material:1. The outer layer is chloroprene rubber with good elasticity;2. The middle layer is nylon braided, which increases the working pressure 300PSI / 2MPa and the maximum burst pressure 1200psi / 8MPa;3. The inner layer is nbr, which can increase oil resistance, acid and alkali resistance, and resist various corrosive liquids.
The thickened tube makes you feel at ease, No worries about leakage. Our fuel line's main material is: nbr copolymer of butadiene and acrylonitrile, it will not crack and its performance ↑ 50%. No matter in extremely cold areas or high temperature desert, Which makes our fuel line more resistant to high/low temperature - 30 °C~120 °C and aging compared with other common fuel lines, It will always accompany your vehicle to arrive the destination safely.
The service life can be up to 9 years, no matter what questions you have, 3 times more than the other ordinary fuel lines, So the fuel line will not leak under any circumstances, don't worry about your vehicle, And keep good working condition, We will always support you. For use in motorcycle mowers tractors snow blowers dirt bikes and all small engines, Use hose and clamps, transfer of petroleum products fuel lines for small engines.
1. CocoMocart
#adCocoMocart 9.85-Foot Length Stretchy 1/4 Inch ID Fuel Line+20pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines
#adThe fuel lines are oil resistant, cold-resistant and ethanol tolerance;Custom Extra long 9. 8 foot length 3m can be cut to size for all your applications.
More information #ad
Package includes:9. 8 feet3m 1/4" id fuel line, 20 X 2/5" ID Hose Clamps. For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control. Designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors snow blowers dirt bikes and just about all small engines.| Brand | CocoMocart #ad |
| Manufacturer | Cococart #ad |
| Part Number | CBF020040PN |
| Model | 2 |
More information #ad
2. IZOKEE
#adIZOKEE 1/4" Inch ID Fuel Line Set, 2 Meter / 6-Foot ¼ Inch Fuel Line + 2 Pcs 1/4 Inch & 5/16 Inch Fuel Filters + 10 Pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engine
#adThe inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Fuel filters and hose clamps are required for the use of fuel line.
More information #ad
You do not need to purchase those part extra. 6 foot / 2 m hose can be cut to size for all your applications. Tight clamping force prevents liquid leakage. Oil resistant, cold-resistant and ethanol tolerance. Fuel filterfilter the impurities, dirt, prevent blockage of carburetor, particles in fuel, only allows clean fuel flows in and keep engines at full power. Wall thickness is 2. 94mm. Upgraded setthe izokee package includes 6 feet 1/4" id fuel line; 2 x 1/4" in-line fuel filters; 10 x 2/5" id hose clamps. The dimensions of the various components within the kit are 100% compatible! 3-layer thickened fuel linethe fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer.
| Brand | IZOKEE #ad |
| Manufacturer | IZOKEE #ad |
| Part Number | IZKE-FLCF |
| Model | IZKE-FLCF |
More information #ad
3. KeeYees
#adCars, KeeYees 1/4"ID 20-Foot Fuel Line Hose with 30 Pcs Hose Clamps for Motorcycles, Marine Boat Outboard, Lawn Mowers
#adSuitable for conveying gasoline, gas, diesel, Cars, fuels in Motorcycles, Lawn Mowers, bio-diesel, Marine Boat Outboard.
More information #ad
Average service life can be up to 5 years. 30 pcs hose clamps made of 65mn spring steel. 20 feet length the length is up to 20 feet 6. 1m. The nylon braided wire provides better support and makes the fuel line more resilient. Please pay attention to select the correct inner diameter size. It is difficult for leaks to occur. This helps you fix the position and further prevent liquid leakage. Wide application keeyees fuel line hose is universal. The clamps are springy, nice construction and hold well. Clever packag design similar to the design of a tissue box, you can take out the fuel line in the box according to your needs, then cut it.
| Brand | KeeYees #ad |
| Manufacturer | KeeYees #ad |
More information #ad
4. uxcell
#adUxcell 6mm 1/4inch Spring Band Type Action Fuel/Silicone Vacuum Hose Pipe Clamp Low Pressure Air Clip Clamp 10pcs
#adPackage content - 10pcs x spring band clamp. Note - please ensure the inner diameter of clips you'll purchase is less than your hose outer diameterabout 1 mm.
More information #ad
Advantage - spring band clamps are self-tensioning sealing components, ensuring a reliable, great flexibility and strength, leak-proof connection of a hose to a fitting, perfect for attach hoses to fittings to prevent flow leakage. Id（inner diameter）6mm: 1/4inch, Fit Hose With O. D: 7. 1mm. Parameter - material : 65 mn spring steel.| Brand | uxcell #ad |
| Manufacturer | uxcell #ad |
| Part Number | a19021200ux0895 |
More information #ad
5. Simachine
#ad33Pcs 1/4" 5/16" 3/8" Fuel Injection Gas Line Hose Clamps Clip Pipe Clamp Metal
#adMore information #ad
| Brand | Simachine #ad |
| Manufacturer | Nan Mei #ad |
More information #ad
6. Zemoner
#adZemoner 1/4” Inch Fuel Gas Line 3.28 Feet with 5 Pcs Hose Clamps for Boat Marine Outboard Gas Diesel Petrol
#adWorry-free combination ◀ the package includes 3. 28 feet id 1/4” inch fuel line; 5 x Hose Clamps. Clamps are sturdy, strong and reliable. Wide application ◀ for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors snow blowers dirt bikes and just about all small engines.
More information #ad
The thick tube makes you feel at ease, no worries about leakage. Tight clamping force prevents liquid leakage. The dimensions of the two parts are compatible with each other. Long service life ◀ due to the high-quality nylon material, the average service life can reach 5 years. Hose clamps ◀ made of 65mn spring steel. The clip is very firm, generally just use pliers to open the gap.
| Brand | Zemoner #ad |
| Manufacturer | Zemoner #ad |
| Part Number | FuelLine-3 |
More information #ad
7. An Ruijia
#adAn Ruijia 6-Feet-Long Fuel Line Hose 1/4" ID x 3/8" OD with Hose Clamps for Small Engines
#adAn Ruijia #ad - Package includes:6 feet1. 83m 1/4" id fuel line, 6 Hose Clamps. Translucent material allows visual inspection of flow. No compatible with greater than 10% ethanol fuel. Special formulation for all power equipment, Oil and gas resistant, Resists swelling and hardening, Maintains air tight seal on fittings even in extreme temperatures, the fuel line still can maintain normal working conditions.More information #ad
Length: 6 feet 1. 83 meter, i. D x o. D: 1/4" x 3/8".| Brand | An Ruijia #ad |
| Manufacturer | An Ruijia #ad |
More information #ad
8. NEW DAFU
#adNEW DAFU 1/4 Inch 6mm ID NBR Nylon Braided Fuel Line Set,5 Ft＋6 Pcs 2/5 Inch ID Hose Clamps,For Motorcycle Kawasaki Kohler Briggs Stratton Small Engines,Boat Marine Outboard Gas Diesel Petrol
#adThe thickened tube makes you feel at ease, No worries about leakage. Our fuel line's main material is: nbr copolymer of butadiene and acrylonitrile, it will not crack and its performance ↑ 50%. No matter in extremely cold areas or high temperature desert, Which makes our fuel line more resistant to high/low temperature - 30 °C~120 °C and aging compared with other common fuel lines, It will always accompany your vehicle to arrive the destination safely.
More information #ad
The package includes:1×5 feet1. 5m 1/4" 6mm id fuel line, 6 × 2/5" id 65 manganese steel spring hose clamps, the dimensions of the two parts are compatible with each other, You can use them directly without additional purchases. The service life can be up to 9 years, no matter what questions you have, 3 times more than the other ordinary fuel lines, So the fuel line will not leak under any circumstances, don't worry about your vehicle, And keep good working condition, We will always support you. For use in motorcycle mowers tractors snow blowers dirt bikes and all small engines, Use hose and clamps, transfer of petroleum products fuel lines for small engines.
| Brand | NEW DAFU #ad |
| Manufacturer | NEW DAFU #ad |
| Height | 1.5 Inches |
| Length | 9.2 Inches |
| Weight | 0.4 Pounds |
| Width | 7.9 Inches |
| Model | NEW DAFU Fuel/Gas Line 01 |
More information #ad
9. Namz Custom Cycle
#adChrome, Namz Custom Cycle Hose Clamp for 1/4in. and 5/16in. Fuel Line
#adNamz Custom Cycle #ad - Made in the USA. Sold in packs of six - an average FXST or custom bike will use a minimum of six oil line clamps and two fuel line clamps. Custom colored hose clamps designed for use with braided copper and stainless steel hoses and fit over most manufacturers braided rubber hoses.More information #ad
Extruded from brass and finished with a matte metallic powder-coat.| Brand | Namz Custom Cycle #ad |
| Manufacturer | NAMZ #ad |
| Height | 1 Inches |
| Length | 10 Inches |
| Weight | 0.5 Pounds |
| Width | 6 Inches |
| Part Number | 0706-0218 |
| Model | 0706-0218 |
More information #ad
