1. ARP
#ad
ARP 1002801 High Performance Flywheel Bolt Kit
#adARP #ad - Package weight: 0256 kilograms. Part number: 1002801. Genuine ARP product. Fit type: Vehicle Specific.More information #ad
Brand | ARP #ad |
Manufacturer | ARP #ad |
Height | 1 Inches |
Length | 5.8 Inches |
Weight | 0.55 Pounds |
Width | 3.9 Inches |
Part Number | 1002801 |
Model | 100-2801 |
More information #ad
2. Barnett Performance Products
#ad
Barnett Performance Products Extra Plate Clutch Kit, Kevlar 307-30-10011
#adBarnett Performance Products #ad - Made in USA. 12% more clutch plate surface area helps eliminate slippage. H-d#37911-90 Kevlar. Bar-flex oil-resistant friction material can be run wet or dry.More information #ad
Brand | Barnett Performance Products #ad |
Manufacturer | Barnett #ad |
Height | 2.1 Inches |
Length | 8.8 Inches |
Weight | 2 Pounds |
Width | 6.9 Inches |
Part Number | 307-30-10011 |
Model | 307-30-10011 |
More information #ad
3. Southwest Speed
#ad
BOLTS, NEW 1955 CHEVY CLUTCH PEDAL LINKAGE KIT WITH BRACKET, CLUTCH FORK ADJUSTING PUSH ROD, SPRINGS, CLUTCH CROSS SHAFT Z BAR, WASHERS
#adSouthwest Speed #ad - This southwest speed clutch pedal linkage kit is a reproduction of the original clutch linkage used on 1955 Chevy Passenger Cars with manual transmissions > The parts in this clutch linkage kit do not have the GM casting numbers but will look, fit, and perform just like original > If you are doing a restoration of a 1955 Classic Chevy or just want the correct clutch linkage to finish that rod project, this linkage kit is the perfect part!.Brand new southwest speed factory replacement clutch linkage kit that includes a factory reproduction clutch bell housing bracket, clutch pedal Push Rod Bolt and Bushing Kit, Anti-Rattle Spring, Cross Shaft Frame Bracket, Two Cross Shaft Felt Washers, Adjusting Clutch Fork Push Rod, clutch cross shaft or also known as an "Z" Bar, and Clutch Pedal Push Rod > This Clutch Linkage Kit fits all 1955 Chevy Passenger Cars with Manual Transmissions SWS Part # 650-4632.
More information #ad
The cross shaft pivot studs will not work with the later model chevy bell housing bracket or frame bracket because the cross shaft cross shaft pivot studs are 5/8" O. D. On 1955 chevy's, and 3/4" O. D. Applications: > 1955 chevy bel air > 1955 chevy 150 > 1955 chevy 210 > 1955 Chevy Nomad > 1955 Chevy Sedan Delivery. On 1956-1957 chevy's. Note: the 1955 265 v-8 engine did not have a block mounted canister or spin on oil filter > in that year an oil filter was installed as an option remotely > If you are installing a later model V-8 Engine in your 1955 Chevy you will need to purchase the 1956-1957 Chevy Bell Housing Bracket, which is modified to clear the canister or spin on filter > You will also need the 1956-1957 Chevy Cross Shaft "Z" Bar Bracket and 1956-1957 Chevy Frame Bracket.
Brand | Southwest Speed #ad |
Manufacturer | Southwest Speed #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 0 Pounds |
Width | 0 Inches |
Part Number | 650-4632 |
Warranty | Parts |
More information #ad
4. Southwest Speed
#ad
WASHERS, BOLTS, SPRINGS, CLUTCH FORK ADJUSTING PUSH ROD, CLUTCH CROSS SHAFT Z BAR, NEW 1957 CHEVY CLUTCH PEDAL LINKAGE KIT WITH BRACKET
#adSouthwest Speed #ad - This southwest speed clutch pedal linkage kit is a reproduction of the original clutch linkage used on 1957 Chevy Passenger Cars with manual transmissions > The parts in this clutch linkage kit do not have the GM casting numbers but will look, fit, and perform just like original > If you are doing a restoration of a 1957 Classic Chevy or just want the correct clutch linkage to finish that rod project, this linkage kit is the perfect part!.Applications: > 1957 chevy bel air > 1957 chevy del ray > 1957 chevy 150 > 1957 Chevy 210 > 1957 Chevy Nomad > 1957 Chevy Sedan Delivery. Brand new southwest speed factory replacement clutch linkage kit that includes a factory reproduction bell housing bracket, clutch cross shaft or also known as an "Z" Bar, Adjusting Clutch Fork Push Rod, anti-rattle Spring, Clutch Pedal Push Rod Bolt and Bushing Kit, cross shaft frame bracket, Two Cross Shaft Felt Washers, and Clutch Pedal Push Rod > This Clutch Linkage Kit fits all 1957 Chevy Passenger Cars with Manual Transmissions SWS Part # 650-4634.
More information #ad
Kit includes: > southwest speed clutch bell housing bracket sws # 650-4611 > southwest speed clutch cross shaft "z" bar sws # 650-4615 > Southwest Speed Clutch Frame Bracket SWS # 650-4617 > Southwest Speed Clutch Fork Adjusting Push Rod SWS # 650-4621. Southwest speed clutch fork adjusting push rod anti-rattle spring sws # 650-4622 southwest speed cross shaft felt washer SWS # 650-4623 Southwest Speed Cross Shaft Bushing and Bolt Kit SWS # 650-4624 Southwest Speed Clutch Pedal Push Rod SWS # 650-4630 .
Brand | Southwest Speed #ad |
Manufacturer | Southwest Speed #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 0 Pounds |
Width | 0 Inches |
Part Number | 650-4634 |
Warranty | Parts |
More information #ad
5. Southwest Speed
#ad
BOLTS, CLUTCH FORK ADJUSTING PUSH ROD, WASHERS, NEW 1956 CHEVY CLUTCH PEDAL LINKAGE KIT WITH BRACKET, CLUTCH CROSS SHAFT Z BAR, SPRINGS
#adSouthwest Speed #ad - Applications: > 1956 chevy bel air > 1956 chevy 150 > 1956 chevy 210 > 1956 Chevy Nomad > 1956 Chevy Sedan Delivery. Brand new southwest speed factory replacement clutch linkage kit that includes a factory reproduction bell housing bracket, clutch pedal push Rod Bolt and Bushing Kit, cross shaft frame bracket, adjusting Clutch Fork Push Rod, Two Cross Shaft Felt Washers, Anti-Rattle Spring, Clutch Cross Shaft or also known as an "Z" Bar, and Clutch Pedal Push Rod > This Clutch Linkage Kit fits all 1956 Chevy Passenger Cars with Manual Transmissions SWS Part # 650-4633.Kit includes: | southwest speed clutch bell housing bracket sws # 650-4611 > southwest speed clutch cross shaft "z" bar sws # 650-4615 > Southwest Speed Clutch Frame Bracket SWS # 650-4617 > Southwest Speed Clutch Fork Adjusting Push Rod SWS # 650-4621.
More information #ad
This southwest speed clutch pedal linkage kit is a reproduction of the original clutch linkage used on 1956 Chevy Passenger Cars with manual transmissions > The parts in this clutch linkage kit do not have the GM casting numbers but will look, and perform just like original > If you are doing a restoration of a 1956 Classic Chevy or just want the correct clutch linkage to finish that rod project, fit, this linkage kit is the perfect part!. Southwest speed clutch fork adjusting push rod anti-rattle spring sws # 650-4622 > southwest speed cross shaft felt washer swS # 650-4623 > Southwest Speed Cross Shaft Bushing and Bolt Kit SWS # 650-4624 > Southwest Speed Clutch Pedal Push Rod SWS # 650-4628.
Brand | Southwest Speed #ad |
Manufacturer | Southwest Speed #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 0 Pounds |
Width | 0 Inches |
Part Number | 650-4633 |
Warranty | Parts |
More information #ad
6. Centerforce
#ad
Centerforce 33001 Clutch Pressure Plate Bolt Accessories
#adCenterforce #ad - See product details for more Information. Pn includes: Bolts. Centerforce accessories, clutch pressure plate bolt.More information #ad
Brand | Centerforce #ad |
Manufacturer | Centerforce #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 0.35 Pounds |
Width | 0 Inches |
Part Number | 33001 |
Model | 33001 |
More information #ad
7. Fel-Pro
#ad
Fel-Pro ES 72249-2 Cylinder Head Bolt Set
#adFel-Pro #ad - Unsurpassed quality you can trust. Meets or exceeds all original equipment specifications. Validated for fit, form and function. Avoid risk associated with re-use of T-T-Y torque to yield head bolts. Application specific design to ensure a perfect fit.More information #ad
Brand | Fel-Pro #ad |
Manufacturer | Federal Mogul #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 0.5 Pounds |
Width | 0 Inches |
Part Number | ES 72249-2 |
Model | ES 72249-2 |
More information #ad
8. JEGS
#ad
JEGS Painted Long Tube Headers | Fits Small Block Chevy Engines | Black Finish | For Straight Spark Plug Cylinder Heads | 1 1/2 “ Primary Tubes With 3” Collectors
#adJEGS #ad - Includes gaskets, reducers, & hardware to complete your project. Black painted finish for great looks and long life. For cylinder heads with straight spark plug design only. Fits chevy/ gmc pickups and suvs such as 1966-72 1/2 and 3/4 ton trucks, 1988-91 1-ton crew cab, 1973-91 suburbans, 1973-1987 trucks, 1967-89 2WD Blazer/Jimmy and 1969-1991 4WD Blazer/Jimmy.More information #ad
1-1/2 “ primary tubes with 3” collectors for small block chevy including 283, 350, 327, 307, 400 and others.Brand | JEGS #ad |
Manufacturer | JEGS #ad |
Height | 13.5 Inches |
Length | 34.5 Inches |
Weight | 28 Pounds |
Width | 10.5 Inches |
Part Number | 30055 |
More information #ad