Top 6 ANEST IWATA IWATA – Body Repair Paint Spray Guns

As an Amazon Associate I earn from qualifying purchases.

1. ANEST IWATA

#ad

ANEST IWATA Iwata W-400-134G1.3mm Nozzle Bellaria Spray Gun without cup

#ad
ANEST IWATA #ad - Even left-handed people have the advantage that the cup does not get in the way, the view is not obstructed, and the sprayed area can be seen clearly.

Air intake air connection: g1 / 4 paint ejection amount Fluid output: 220 mL / min Air consumption: 270 L / min. Spray pressure air pressure: 02mpa 2. 0 bar pattern opening Pattern width: 280 mm. Nozzle diameter nozzle orifice φ 1. 3 mm gravity feed paint cup mounting diameter Fluid connection: M16 x 1. 5. Since the cup is located directly above the spray gun in the center cup gun, the balance of the center of gravity is excellent, and the operability of the spray gun is very good.
BrandANEST IWATA #ad
ManufacturerANEST IWATA #ad
Weight1.06 Pounds
Part Numberw-400-134g

2. ANEST IWATA

#ad

ANEST IWATA LPH400 LPH-400-144LV 1.4 mm LPH400LV Spray Gun Without Cup

#ad
ANEST IWATA #ad - Fluid output ml/min: 130 Fluid nozzle size mm inch: 1. 4 0055. Atomizing psI: 16. 0 Air cap model: LV4. Cfm: 9. 5.
BrandANEST IWATA #ad
ManufacturerANEST IWATA #ad
Height1.97 Inches
Length8.66 Inches
Width5.31 Inches
Part NumberLPH-400-144LV
ModelLPH-400-144LV

3. ANEST IWATA

#ad

Anest Iwata 4930 Lph80-124g Gun Only

#ad
ANEST IWATA #ad - New e4 air cap for a finer, wider, and flat pattern. Pattern range from 1. 6 inch round to 5. 5 inch fan pattern. Operates on 1. 8 cfm. Applicable for solvent and waterborne products.
BrandANEST IWATA #ad
ManufacturerAnest Iwata #ad
Weight0.64 Pounds
Part Number4930
Model4930

4. ANEST IWATA

#ad

ANEST IWATA KIWAMI4-13BA4 1.3mm Spray Gun without Cup

#ad
ANEST IWATA #ad - Suggested air pressure is 1. 0 to 3. 5 bar 29 to 50 PSI. Paint cup is sold separately. Air & fluidconnection: air g1/4npS1/4/ FluidG1/4NPS1/4. Orifice 1. 3 mm.
BrandANEST IWATA #ad
ManufacturerANEST IWATA #ad
Weight0.78 Pounds
Part NumberKIWAMI4-13BA4

5. ANEST IWATA

#ad

ANEST IWATA Iwata W-400 251G2.5mm Nozzle with 600ml plastic cupPCG-6P-M …

#ad
ANEST IWATA #ad - Pattern width mm: 340 Type of feed: Gravity feed. Atomizing air pressure MPa: 029. Fluid nozzle orifice: 2. 5mm for primer, High Viscosity. Air consumption L/min: 360 .
BrandANEST IWATA #ad
ManufacturerIWATA #ad
Part Number19TKD4S
ModelW-400 251G with 600ml cup

6. ANEST IWATA

#ad

ANEST IWATA WIDER WIDER1-15E2P 1.5mm Nozzle Pressure Feed Without Cup

#ad
ANEST IWATA #ad - Atomizing psi: 024mpa. Successor model of Anest Iwata W-101-152P. Air output: 220L/min. Fluid nozzle Size: 1. 5mm. Fluid output: 250ml/min.
BrandANEST IWATA #ad
ManufacturerANEST IWATA #ad
Weight0.64 Pounds
Part NumberWIDER1-15E2P