Top 10 Worm Clamps Stainless Steel – Automotive Replacement Clamps & Sleeving Hoses

As an Amazon Associate I earn from qualifying purchases.

1. Swpeet

#ad

Automotive And Mechanical Applications, 304 Stainless Steel Adjustable 6-38mm Range Worm Gear Hose Clamp Perfect for Plumbing, Swpeet 60Pcs Assorted Sizes Hose Clamps Kit

#ad
Swpeet #ad - The steel adopts hole technology makes its screw tightly bite the steel band. Wide adjustable size range- clamp kit are flexible and ductile with wide adjustable size range from 6 to 38mm/024-1. 5 inches. High quality -- high quality 304 stainless steel 304 hose clamp, plating zinc, Can resist the corrosion and rust in marine environments.

It comes with a wide variety of clamp sizes so you don't have to concerned about which size you need, you can just try it until it fits. These hose clamps did get the job done well, no leaking at all. East to use -- just need use a screwdriver to loosen the screw of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw.

So many sizes are enough for daily needs. Fit hose diameter: 6-12mm: 10pcs; 10-16mm:10pcs; 13-19mm: 10pcs; 16-25mm: 10pcs; 19-29mm: 10Pcs; 22-32mm: 5Pcs; 21-38mm:5Pcs. Environmental friendly -- it can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long. Working great -- these hose clamps are just what you need when you have to make repairs to your home or automobile.
BrandSwpeet #ad
ManufacturerSwpeet #ad
Part NumberHougu-60

2. XINMKA

#ad

Hose Clamps, Fuel Line Clamps for Plumbing/Automotive/Mechanical Applications, 60 Pcs 304 Stainless Steel Adjustable 6-38mm Range Worm Gear Hose Clamp

#ad
XINMKA #ad - Package quantity〗: 60 Pcs Band Hose Clamps. Reused〗:it can be reused and recycle if you don't want them to stay on the original place due to the high quality material which makes them worked last for long.

High quality〗:these hose clamps are all made of premium 304 stainless steel material. Clamps are sturdy, anti-corrosion, strong and reliable. Both indoor or outdoor. Adjustable size range〗:clamps are flexible and ductile with wide adjustable size range from 6-12mm, 13-19mm, 18-32mm, 10-16mm, 16-25mm, 19-29mm, 21-38mm. Salt resistant, anti rust, waterproof, oil-proof. Widely used〗: clamps are used in securing hoses, industrial, shield, tube, boat/marine, fuel lines etc. Perfect to apply in automotive, pipe, household etc.
BrandXINMKA #ad
ManufacturerXINMKA #ad
Part NumberB07J2K233D

3. Keadic

#ad

Keadic 25Pcs Adjustable Fuel Line Clips Worm Gear Hose Clamp Assortment Kit for Various Pipes Automotive Mechanical Use, 304 Stainless Steel 27-51mm

#ad
Keadic #ad -  . Scientifical design there is a buckle on the back, which will not disconnect the steel strip due to excessive force to affects your normal use. Wide application perfect for securing cable, automobile, pipe, etc. Of course, you can contact me freely if you come across any problems about our products, and I will reply you as soon as possible within 12 hours.

Adjustable size these flexible clamps have adjustable size range from 27-51mm, suitable for hose outside diameter 27-51mm. 90 days after-sale service we are confident with our product, and believe that you won’t regret if you got these durable hose clamps. Plus, there are 90-day free return time so that you can buy it no worries.

You can use them without any worry both indoor and outdoor. Widely used in various fields such as industrial transportation, hoses, tuble, fuel line, agricultural pharmacy, chemical oil, boat/ marine ship and so on. Durable stainless steel made of quality 304 stainless steel which is commonly recognized as environmentally friendly material, our worm gear hose clamps are highly anti-corrosion, anti-rust, non-toxic and pollution-free.
BrandKeadic #ad
ManufacturerKeadic #ad

4. VIGRUE

#ad

Fuel Line Clamp for Plumbing Automotive and Mechanical Applications 8-44mm Range, VIGRUE Hose Clamps Assortment 100% 304 Stainless Steel Adjustable Worm Gear Hose Clamps 80pieces with Wrench

#ad
VIGRUE #ad - Clamp’s diameter can be adjusted according to a worm gear mechanism for precisely sealing pressure. 8 popular clamp sises: 10pcs 5/16-29/64"8-12mm, 10pcs 1-1-1/2"25-38mm, 10pcs 1/2-3/4"13-19mm, 10pcs 3/8-5/8"10-16mm, 10pcs 1-1/4-1-23/32"32-44mm; and the largest one size is 12.

7mm wide, 10pcs 7/8-1-1/4"22-32mm, 10pcs 3/4-1- 5/32"19- 29mm, 10pcs 5/8-1"16-25mm, the other sizes are 8mm wide. Perfect to apply in such both indoor or outdoor situations as automotive, industrial, household and so on. If you need a single size or different quantity, welcome to contact. After sale service: whether it's your first vigrue purchase or you're back for more, rest assured that we're in this together: All VIGRUE products are backed by our 12-Month product service.

Wide adjustable size range- clamps are flexible and ductile with wide adjustable size 8-44mm range. Reliable quality- the whole hose clamp including the band, strong and reliable; salt resistant, housing and screw are all made of 100% 304 stainless steel material with 06mm thickness, anti-rust, anti-corrosion, which is very sturdy, waterproof, oil-proof characteristic for long-term use. Widely applied: clamps are adopted in securing hoses, pipe, tube, shield, boat/ marine, cable, fuel lines etc.
BrandVIGRUE #ad
ManufacturerVIGRUE-KING OF SCREW #ad
Part NumberHose Clamps80pieces
ModelHose Clamps80pieces

5. Hon&Guan

#ad

Hon&Guan 4" Stainless Steel Hose Clips Duct Clamps Adjustable Worm Drive Hose Clamp for Inline Duct Fan Pack of 2 100mm

#ad
Hon&Guan #ad - Pack of 2. For automotive, industrial and agricultural applications providing a tight seal. Material:stainless steel; rust resistant. 4 sizes available and easy to install. Perfectly suited for ducting your tumble Dryer, In-Line Extract Fans, Bathroom or Kitchen extractor fan, Hydroponics, or Cooker Hood.
BrandHon&Guan #ad
ManufacturerHon&Guan #ad
Part NumberST-100-US

6. ROADFORMER

#ad

64mm Duct Clamp Pipe Clamp Worm Drive Hose Clamp Fuel Line Clamp 10 Pack, Roadformer 2" Worm Gear Hose Clamp, 40mm, 64mm, Full Stainless Steel with 1/2" Band Working Range 40mm, SAE 32 Size

#ad
ROADFORMER #ad - Easy to use and install - the stainless steel clamps is designed with inner worm gear to smoothly adjust the working diameter to precisely fit hose & pipe size. Wide industry application - perfect to apply in Automotive, Agriculture, Construction, Housekeeping, Indoor and Outdoor.

We set quality standard. Ultimate Torque can reach 60in. Lbs. Roadformer dedicated private label package does means quality, commitment and reliability. Please select appropriate clamp based on your Hose OD. 6. 8nm and installation Torque in 35 - 45in. Lbs 4. 0 - 5. 1nm.

Multiple use in different condition and environment. Adjustable working range – 2” hose clamps with flexible working range from 40mm - 64mm same as 1. 57" - 2. 5", pipes, generally it is used in securing hoses, tubes, lines and cables in multiple situations.10 pieces in package – total 10 pieces in one box as a set. It is also well suited for Marine applications.
BrandROADFORMER #ad
ManufacturerROADFORMER #ad
Height4 Inches
Length3.85 Inches
Width3.75 Inches
Part NumberRCF32SS

7. Mishimoto

#ad

10-Pack, Black, 0.71"-1.26" 18mm-32mm, Mishimoto MMCLAMP-WG High-Torque Worm Gear Clamp

#ad
Mishimoto #ad - 26" 18mm–32mm. 71"–1. Securely clamps pipes, couplers, and hoses with an outer diameter from 0 . Worm gear design for quick and easy tightening. Mishimoto Lifetime. Sold in packs of 10 Stainless steel construction resists corrosion longer than zinc-plated clamps.
BrandMishimoto #ad
ManufacturerMishimoto #ad
Height1 Inches
Length4 Inches
Weight0.45 Kilograms
Width4 Inches
Part NumberMMCLAMP-WG-32HTBK
ModelMMCLAMP-WG-32HTBK
WarrantyLifetime Warranty

8. Mishimoto

#ad

Mishimoto Stainless Steel T-Bolt Clamp, 2.5"

#ad
Mishimoto #ad - Actual clamping ability: 2. 60 inch to 2. 91 inch. Rust proof stainless steel. Locking nut keeps clamp from loosening. Equipped with a self-locking nut. More durable than traditional worm clamps. Stainless steel construction resists corrosion. Polished finish increases engine bay aesthetics.
BrandMishimoto #ad
ManufacturerMishimoto #ad
Height2.54 Inches
Length10.16 Inches
Weight0.15 Pounds
Width10.16 Inches
Part NumberMMCLAMP-25
ModelMMCLAMP-25

9. Glarks

#ad

Glarks 50Pcs 7-18mm Stainless Steel Mini Fuel Injection Hose Clamps Adjustable Pipe Hose Clip Tube Clamps Assortment Kit Hose Clamp Kit

#ad
Glarks #ad - Excellent for sealing hoses against loss of liquid, saving your time and money on costly repairs the pipe. The range of clamps shows the minimum and maximum sizes they can be adjusted. Durable quality:all the hose clamps are made of high quality 304 stainless steel, they have superior rust resistance and the excellent of oxidation resistance in a humid environment.

They also strong and durable when installing on the tube, you will no longer worry about them rusting and breaking. Wide hose clamp size: in this set, 10-12mm, we provide 10 size of fuel injection hose clamps which are 7-9mm, 14-16mm, 15-17mm, 8-10mm, 12-14mm, 13-15mm, 11-13mm, 9-11mm, 16-18mm each for 5pcs total 50pcs packed in a plastic box, easy to storage and carry. Save time and money:these mini fuel injection line style hose clamps are edge polished smooth to hold securely and without damaging the hoses.

Adjustable style: all the hose clamps with adjustable screws, you can adjust the size according to the diameter of the pipe, so you can install and remove them at any time with a socket wrench. Function and use:these clamps are locking secure and tight, ranch, plumbing, marine, farm, widely used in various diesel petrol pipe, home use, auto repair, would work much better than standard hose clamps, industrial and more.
BrandGlarks #ad
ManufacturerGlarks #ad
Part NumberG-861

10. HiwowSport

#ad

HiwowSport 67-75MM Working Range T-Bolt Stainless Steel Clamp Fit for 2.5'' ID Turbo Intercooler Hose

#ad
HiwowSport #ad - T-bolt band clamps provide high tensile strength, durability, and are corrosion resistance. Working range 67-75mm t-clamp Fit for 2. 5'' id hose. Please check up the part number of your origina item before purchase it. Made of 304 stainless steel with rounded band edges to protect soft hose materials from cuts. Heavy duty stainless steel T-bolt Clamps which could leave those old worm clamps in the dust.
BrandHiwowSport #ad
ManufacturerHENWEI #ad
Part NumberH105TC-3.0