Top 10 Tesla Model 3 puddle Door Lights – Automotive Replacement Lighting Products

As an Amazon Associate I earn from qualifying purchases.

1. Carwiner

#ad

Carwiner Tesla Model 3/Y/S/X LED Puddle Lights Car Logo Projector Door Step Light Accessories Interior Lights 2 Pack T logo with letters

#ad
Carwiner #ad - Please feel free to contact us if you have any questions about the lights. Open the door of the projection, immediately show your charm, and get praise from friends. The pin and plastic parts are integrally injection molded, so the pin is not easily deformed.

We will provide a 12-month warranty on the lights. Adopt four buckle designs to replace the previous two buckle schemes, and reinforce the structure to avoid loosening. Detailed compatible car models please refer to the description page. Increase the heat dissipation area. The installation is very simple, and the original door lights can be replaced directly. Benefits of installation after getting off your tesla, attract more attention, Puddle Light “T” logo can let the owner see the walking path and avoid water.

Upgrade details replace the previous plastic back cover with aluminum parts. Easy to install no drilling, no wiring, no damage to your car. Precautions compatible with tesla model 3/s/y/x. Composition of lamp head high-transmittance three-layer combination lamp, High light transmission, low energy consumption; A higher-quality laser-etched projection glass not printed film for clarity and longevity will be brighter and never fade.
BrandCarwiner #ad
ManufacturerCarwiner #ad
Part NumberCW-YBD-FT

2. EastFly

#ad

EastFly Tesla Model 3/S/X/Y Puddle Lights Car Logo Projector Door Courtesy Step Light Accessories Led Interior Lights

#ad
EastFly #ad - Avoid the cheap and poor quality Pig tails of the old version from generating wrong instructions on the window glass and damaging the window. Projection technology-high-transmittance three-layer combination lamp, triple filter, environmental protection and high efficiency. Please feel free to contact us if you have any questions about the lights.

Fit for model 32018~2021, model s2015~2021, model x2016~2021, model y2020~2021. The heat-resistant flame-retardant plastic shell is integrally injection-molded, and four buckles are used to fix the light to the door panel. Note: make sure your car has original door light at first when you want these logo lights for replacement lights. With high-quality glass projection chip, energy saving, the projection will be the brightest and clearest. Shell design-the aluminum back cover is used to increase the heat dissipation area.

Long-term use ensures that the structure will not loosen. No drilling, no damage to your car. Never fade and never blurry, 2 years warranty. Latest upgrade-the interface design of the original car ensures the positive and negative poles correspondingly connected and non-destructive installation to ensure the safety and stability of the wiring. Easy installation-with car door panel removal tool, no wiring, which is made of impacted resistant nylon fiber material and will not scratch the car door panel.
BrandEastFly #ad
ManufacturerEastFly #ad
Height1.38 Inches
Length3.7 Inches
Width3.7 Inches
Part NumberTL00X

3. Carwiner

#ad

Carwiner Compatible with Tesla Model 3/Y/S/X LED Puddle Lights Car Logo Projector Door Step Light Accessories Interior Lights 2 Pack T logo

#ad
Carwiner #ad - Detailed compatible car models please refer to the description page. Precautions we will provide a 12-month warranty on the lights. Adopt four buckle designs to replace the previous two buckle schemes, and reinforce the structure to avoid loosening. Open the door of the projection, attract more attention, immediately show your charm, and get praise from friends.

When you receive the package, please do not use the pictures in the manual to confirm the pattern of the puddle light. The new puddle lights are replaced the previous plastic back cover with aluminum parts. Please refer to the actual pattern with the real object. Increase the heat dissipation area. The pin and plastic parts are integrally injection molded, so the pin is not easily deformed. Please feel free to contact us if you have any questions about the lights.

Please note: all kinds of puddle lights with different logo use the same manual. Composition of lamp head high-transmittance three-layer combination lamp, High light transmission, low energy consumption; A higher-quality laser-etched projection glass not printed film for clarity and longevity will be brighter and never fade. Easy to install no drilling, no wiring, no damage to your car. The installation is very simple, and the original door lights can be replaced directly.
BrandCarwiner #ad
ManufacturerCarwiner #ad
Part NumberCW-YBD-FT

4. EastFly

#ad

EastFly Never Fade Ultra-Bright Led Puddle Door Lights Logo Projector Light for Tesla Model 3 Model S Model X Model Y 1. Red Emblem with Letter

#ad
EastFly #ad - Detailed compatible car models please refer to the description page. The package is equipped with pluggable pig tails, extended wiring, more convenient installation; Note: If you use pig tails, please fix them, otherwise there may be abnormal noise caused by vibration during driving.

Upgraded aluminum alloy shell -- high temperature resistance, safe, better heat dissipation, flame retardant material, stable, can be used with confidence. The original car interface design, no punch, simple and convenient, does not hurt the car, the line is safe and stable; Open the door that is the projection, immediately show your dignity, highlight the charm, improve your taste. Note: make sure your car has original door light at first when you want these logo lights for replacement lights.

High definition pc lamp head --high-transmittance three-layer combination lamp, environmental protection and high efficiency; Fit for Model 32018~2021, Model S2015~2021, clearest and never fade, model x2016~2021, Model Y; With high-quality glass projection chip, triple filter, the projection will be the brightest, energy saving, permanent warranty.
BrandEastFly #ad
ManufacturerEastFly #ad
Part NumberTL00X

5. Carwiner

#ad

Carwiner Puddle Lights for Tesla Model 3/Y/S/X Ultra-Bright Easy-Plug Replacement LED Accessories 2 Pack

#ad
Carwiner #ad - Better performance made of genuine osram lamp chips, low heat, low power, and longer service life. The aluminum part of new puddle light is smaller and easy to disassemble and replace. Upgrade details 1 the new tesla puddle lights comes with an extension cable, Convenient and fast, no external cable is required.

We will provide a 12-month warranty on the puddle lights. The old door light is made of ordinary lamp chips and three acrylic lenses, which has high definition, high-definition glass and five lenses, larger pattern, which pattern will be deformed, and low brightness. Upgrade details 2 the aluminum part on the back of the old door light is too large, which is difficult to pry out after being installed.

Precautions compatible with tesla model 3/s/y/x. Please refer to the description page for specific compatible models. Upgrade details 3 the new puddle light is made of osram lamp chips, bluish, and the pattern is not out of shape. Perfectly solve the problem of different brightness of the front and rear doors. Package included:2 x projection Door Lights One Left & One Right. No-damage installation, reducing installation risks.
BrandCarwiner #ad
ManufacturerCarwiner #ad
Part NumberCW-XKYBD-TDZ

6. MEALAM

#ad

LED Welcome Step Light, MEALAM Tesla Car Door Puddle Light, Courtesy Atmosphere Interior Lamp Accessories(4 Packs), Logo Projector for Model 3 Y S X

#ad
MEALAM #ad - High quality multi-layer glass lens combination and high-quality lamp beads can make the projection more clear and bright. Please check the projector when installing, because it has left and right difference. Compatibility the puddle light fits for Tesla Model 3 Y S X.

It also has the advantages of low power consumption and good stability. If you have any question please feel free to contact us. No drilling and no wiring. Direct plug and play it just take you a little while to install. We provide 24 hours service. This will make your car more unique and prevent you from stepping on standing water. Note: please make sure your car has original car door light.

And the projection car door light use flame-retardant material which can resistant to high temperature. When you open your car door at night, the logo will project bright and crisp on the ground. Package the package include 4pcs projection car door light and 4 pig tails. Good experience it was a fun and easy upgrade to your car. You can use a screwdriver to remove the original light carefully and then plug in the new puddle light.
BrandMEALAM #ad
ManufacturerMEALAM #ad
Height3.7 Inches
Length4.17 Inches
Width1.61 Inches
Part NumberMEA-Tesla Logo Puddle Light-4P
WarrantyTHREE MONTHS WARRANTY

7. EastFly

#ad

EastFly Never Fade Ultra-Bright Led Puddle Door Lights Logo Projector Light for Tesla Model 3 Model S Model X Model Y1. Red bottom Emblem with Letter

#ad
EastFly #ad - The package is equipped with pluggable pig tails, more convenient installation; Note: If you use pig tails, extended wiring, please fix them, otherwise there may be abnormal noise caused by vibration during driving. Upgraded aluminum alloy shell -- high temperature resistance, better heat dissipation, flame retardant material, safe, stable, can be used with confidence.

Note: make sure your car has original door light at first when you want these logo lights for replacement lights. Detailed compatible car models please refer to the description page. High definition pc lamp head --high-transmittance three-layer combination lamp, model x2016~2021, Model S2015~2021, triple filter, clearest and never fade, the projection will be the brightest, Model Y; With high-quality glass projection chip, energy saving, environmental protection and high efficiency; Fit for Model 32018~2021, permanent warranty.

The original car interface design, the line is safe and stable; Open the door that is the projection, immediately show your dignity, no punch, does not hurt the car, simple and convenient, highlight the charm, improve your taste.
BrandEastFly #ad
ManufacturerEastFly #ad
Part NumberTL00X
ModelTL00X

8. Motrobe

#ad

Motrobe For Tesla model Y model 3 model X model S Never Fade Ultra-Bright Step LED Puddle Door Lights Car Logo Projector Welcome Light 2016-2021 Updated

#ad
Motrobe #ad - Upgraded aluminum alloy shell, will not separate and deform during installation. If there are any problems with the project, please contact us immediately and all issues will be resolved within 24 hours. After getting off your tesla model 3 Model Y, Puddle Light T logo can let the owner see the walking path and avoid water or other obstacles.

The high-lens film has a clear projection and powerful light transmission, which effectively reduces the lens color cast and ensures a bright and clear picture. We offer a 30-day refund and a lifetime warranty. Made of high temperature resistant transparent flame retardant material, integrally injection-molded, it is safe and stable.

No need for punching and wiring, portable installation, any damage to your car. Low power consumption and long life. It does not fall apart with manipulation as the same as other products, and the light will never fade. Package included: 2 x tesla model 3 / model y puddle lights, 2* extension cords, 1*Installation Instruction. Redesigned for tesla model 3 model y.
BrandMotrobe #ad
ManufacturerMotrobe #ad
Part NumberM-016

9. Farmogo

#ad

Farmogo Car Door LED Logo Projector puddle lights Ultra-Bright LED Welcome Light Ghost Shadow for Tesla Model 3 Model S Model Y Model X Accessories4 pack

#ad
Farmogo #ad - Function the use of tesla car puddle lights can improve the car's grade and when the door is opened at night, the projected pattern can alert others to avoid accidental getting off, so that the owner can not see the road surface underfoot and avoid puddles or other obstacles on the ground.

Composition of lamp head high-transmittance three-layer combination lamp, High light transmission, low energy consumption; A higher-quality laser-etched projection glass for clarity and longevity will be brighter and never fade. Resistant to high temperature and corrosion, and can work in an environment of -40℃~105℃. Adopt four buckle designs to replace the previous two buckle schemes, and reinforce the structure to avoid loosening. High-quality materials - the tesla light replace the previous plastic back cover with aluminum parts.

Increase the heat dissipation area. Compatibility-the tesla door light logo can be adapted to 4 different models of Model S Model 3 Model Y Model X, Integrally injection-molded, will not separate and deform during installation. Which can meet the needs of multi- products. Please make sure the original car has lights. How to installwhen using the door puddle light, you need to use to gently pry off the original light with a screwdriver, and then replace it.
BrandFarmogo #ad
Part Number166561

10. KFZMAN

#ad

Car Door Projector LED Lights for Tesla Model 3 Model S Model X Model Y, KFZMAN Car Logo Welcome Light Door Laser Shadow Replacement Lights with Letter, Upgraded Version, Pack of 4

#ad
KFZMAN #ad - Please make sure your car has original door light before purchase if you intend to replace it with the attractive LOGO projector. Custom fit with tesla - compatible with tesla model s model 3 model X for certain year. Premium lamp head - made of cree LED beads with high-transmittance, energy saving, higher brightness, environmental and high efficiency.

Just plug and play, use a flathead screwdriver or trim tool to remove and disconnect original lights, then plug in new door lights with correspondent connection finished. Hd clear display - the acrylic charming logo light and the letter light will display on the ground when you open the car door and it will AUTO off when you close the door.

Please refer to amazon page for details. Easy set-up - please note tesla projector has left and right difference, make sure they goes to the right position. Instant application - adopt germany advanced constant current control technology to ensure uniform illumination, Built in intelligent decoding for non-destructive installation, Also the current exactly matches with the original car.
BrandKFZMAN #ad
ManufacturerKFZMAN #ad
Part NumberKFZ-LOGO-TESLA-001