As an Amazon Associate I earn from qualifying purchases.
1. iJDMTOY #ad
IJDMTOY OEM-Spec Red Lens 9-LED Rear Truck Bed Mounted Center Tailgate Running Light Bar, Also Fit Other Truck/Pickup, Compatible with 1999-2010 Ford F-250 F-350 F-450 DRW #adiJDMTOY #ad
- Sonically-sealed poly-carbonate lens and waterproof housings exterior use. Rear center tailgate light bar length: 17" and two screws are approx 16" apart; some drilling and wiring are required to install. Compatible with 2-2010 ford f-250 f-350 f-450 f-550 f81z15444aa, also can be retrofit slightly to fit the Dodge RAM 1500 2500 3500 or Chevy Silverado GMC Sierra 2500HD 3500HD, etc.
Oem-spec red lens with full led lightbar, powered by 9 pieces high power NICHIA Super FLUX LED emitters with a super bright and sharp lighting output.
2. iJDMTOY #ad
Brake Lamp & Turn Signal Lights, Functions as Tail Light, iJDMTOY 15-Inch Truck Trailer Tailgate Red LED ID Light Bar Compatible With Chevrolet Dodge Ford GMC Nissan Toyota etc, Dark Red Lens #adiJDMTOY #ad
- Dark red lens 15" led tail light miniature light bar, 14. 5" hole to hole measurement. Drilling and wiring required to install; black wire: running light +, white wire: ground, green/yellow wires: turn signal both together: brake light.
Good for any truck suv 4x4 ATV UTV Wrangler, etc. Powered by 11 pieces led lights function for rear running light, brake light and left/right turn signal light.
|Manufacturer||iJDMTOY Auto Accessories #ad|
|Model||15" Tail Brake Turn Rigid LED Light Bar|
3. Nilight #ad
2 Years Warranty, Nilight, TL-01 6" Oval Red LED Tail 2PCS w/Surface Mount Grommets Plugs IP65 Waterproof Stop Brake Turn Trailer Lights for RV Truck Jeep #adNilight #ad
- For installation, and then connect the 3 wires to the corresponding wires on vehicles. 6” x2. 5” x 1. Upgraded unique design: niligh's tail light has unique “ears” on its two sides, and a tighter attaching ability between 3-prong plug and it. Awesome brightness: each tail light has 10 pcs high-quality SMD LEDs to output super bright red light, high brightness of Turn/Brake light, low brightness for Taillight, improving visibility and ensuring you a safer night.
Fit type: Universal Fit. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack.
Shake proof, upgrade notches on the inside of grommet, there will be no worries of loosing light or wires. Easy installation: the taillight comes with grommets for surface mount, you just need to surface mount the grommets & light setup, also added a 3-prong watertight plug with attached wire.
Hole size for surface mount is: 6. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. Universal application: work on a 12 v dc system, travel trailer, semi-trailer, function as turn/Brake light, trailers, tractors, special vehicle, horse trailer, dump Truck, tail light for all kinds of trucks, etc.75”. Just make sure the hole size before you purchase.
|Warranty||2 Years Warranty|
4. PHINLION #ad
Phinlion Super Bright 3014 72-SMD 1157 2057 2357 1034 7528 BAY15D Red LED Light Bulbs for Brake Tail or Turn Signal Blinker Lamp Lights #adPHINLION #ad
- Please check the owner manual or stock bulb size before purchasing. Set of 2 bulbs 1000 lumens per bulb, 72 pcs high power & high brightness 3014 SMD LED chips, 360 degree light output; Voltage: DC 12V-24V, Color: red.
One year warranty. Load resistor might be needed to avoid signal hyper flashing or error code issue. Application: brake/tail light, parking light, turn signal blinker light, backup reverse light, side marker light, center high mount stop light, cornering light etc.
Cross reference number: 1157 bay15d 1016 1034 1154 1196 2057 2357 2397 3496 7528 7528l 94 1157a 1178a 2057a 2357a 2357na, p21/5w, 12499 etc. Advantage: wide operating voltage technology and built-in constant current IC driver, 6063 aluminum for excellent heat dissipation, low temperature longer lifespan.
5. Nilight #ad
2 Years Warranty, Nilight, TL-18 2PCS 4" Round Red LED Trailer Tail Lights w/Surface Mount Grommet Plugs IP67 Stop Brake Turn Tail Lights for Truck Trailer RV Jeep #adNilight #ad
- Easy installation: just surface mount the grommets & light setup, and then connect the 3 wires lead. Hole size for surface mount is: 4. Universal application: work on 12v dc system, tail light for all kinds of trucks, dump Truck, tractors, function as turn/Brake light, special vehicle, travel trailer, horse trailer, trailers, semi-trailer, etc.
Top led: each light has 12pcs upgrade piranha leds, higher intensity light and extend a longer lifetime, wider lighting angle, feature better heat dissipation, features excellent bright light and extend a longer lifetime.
Improve visibility and ensure you a safer night.
Stand out brightness: output 3 time brighter light than others. High brightness for Turn/Brake light, low brightness for Tail light. 3” diameter hole, attach the 3-prong plug to light, 2” depth. Just make sure the hole size before your purchase. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack.
|Warranty||2 Years Warranty|
6. iBrightstar #ad
DOT Compliant, iBrightstar IP68 Waterproof Square Trailer Lights kit, Brake Stop Tail Running License Plate LED Light Lamp for 12V Camper Truck RV Boat Snowmobile Marine Under 80" #adiBrightstar #ad
- Please make sure connect wiring and no electronic short before marine/underwater. Excellent waterproof/submersible lights for trailer. 2 optional mounting ways, you can mount on the back or the side of the trailer. Application: universal for trucks, tractors, trailers under 80", semi-trailer, bus, camper, boat, Dump Truck, special vehicle etc.
Super bright LED lights provide maximum visibility and safety. 18 gauge pure copper wires ensure trailer lights LED do good job underwater. Fully operable in inclement weather, these heavy duty trailer lights are tough and durable for the long term.
The trailer led lights are suitable for under 80 Inch width towing vehicle, truck, like boat, trailer, snowmobile etc. Easy to install the submersible trailer lights. 1 additional function for left trailer light: license plate light.
Wiring diagram ships with trailer lights, you can also find it on detail page. Left and right led trailer tail lights have 6 functions in common: stop/turn/Tail/Rear reflector/side reflector/side marker light. Buy with confidence, any other problem please feel free to contact us, we are always here to satisfy of you. Sonic welding whole Sealing Technology ensures sealing solidity of the LED tail lights. Further more, every possible gap is sealed well with glue, such as wires entrance holes and edge of the lens.
7. LivTee #ad
2pcs, LivTee Waterproof 4" Round Red LED Trailer Lights Tail Brake Stop Turn Parking Light Kit with Grommet and Plug for Boat Trailers RV Jeep Trucks #adLivTee #ad
- Any other problem please feel free to contact us, we are always here to satisfy all of you. Mount to the back of small & large trailers, atv & tail light - This 2-piece red LED light set is designed for multi-function use as a brake or stop light, boat & dirt bike trailers.
Warranty: fully one year guaranteed for the manufacturer defect. Brake & jet ski trailers, turn signal and tail light.
Durable waterproof design - each acrylic LED lens is sonic welded to the housing and built for maximum durability in working conditions and rough weather. Bright & highly visible - 12 bright leD diodes brilliantly illuminate and cut through darkness & low-visibility conditions to light up the rear of your vehicle or trailer.
Easy installation - each light comes with an industry standard 3-prong plug with attached 12" wiring. Wiring is pre-sliced for quick installation. Included black rubber grommet makes for an extra easy surface mount setup - no holes or screws required.
8. MIFMIA #ad
Red, MIFMIA 1157 LED Bulb Brake Light Bulb, 3200 Lumens CSP LED Tail Lights with Projector Lens, 2057 2357 7528 BAY15D Non-Polarity LED Brake Lights #adMIFMIA #ad
- Package included - pack of 2 1034 7528 2357 2057 bay15d 1157 led bulb brake light bulb tail light replacements, 1600lm per bulb, bulb size: 2. 28inl*059inw*079inh, 583ma current, 7w per bulb, 12-24V Wide voltage, weight: 45g.
High quality & high power - full A380 aviation aluminum body with projector lenses for maximum light output and better heat distribution. Advantages vs halogen bulbs - the built-in intelligent ic driver can bring you a more energy-saving from 14w to 7w, lower temperature from 1000°F to 150°F, and longer life span from 1000h to 50000h performance without any UV/IR radiation.
Non-polarity & easy installation - there is no need to worry about polarity direction nor fuse blowout, just simply plug and play and the installation will be finished within just 10 minutes.
360° full-angle light will make your car more noticeable while braking. 500% brighter & upgraded csp chipset - each 1034 7528 2357 2057 bay15d 1157 led bulb brake light bulb has 5pcs Imported CSP LED Chips which make it 5 times brighter than traditional halogen bulbs.
|Warranty||1 year warranty with worry-free after-sale service|
9. Vouke #ad
Vouke 38 LED 12V Universal Tail Brake Turn Stop Licence Back up Lights for Truck Trailer Boat etc,12V Stud Mounted Lamps,Pack of 2 #adVouke #ad
- 18 white leDs for backup function. Resistant polycarbonate housing and acrylic lens are sealed to prevent damage from moisture and corrosion. Each with 38 super bright leds:16 red leds for stop/turn/tail functions.
Universal for 12v vehicles like Truck, Lorry, Van, Boat, Trailer, caravan, bus, etc.4 white leDs for license illuminator. 3-stud mounted design, 4 color wire connection. D ot compliant for street legal lighting. 12 volts; Low ampere draw.
|Manufacturer||VOUKE US #ad|
10. Nilight #ad
TL-10 2PCS 16” 11 LED Red Trailer Light Bar for Park Stop Turn signals Tail Brake Light DOT Compliant IP65 Waterproof Truck Trailer Marker ID Bar, 2 Years Warranty, Nilight #adNilight #ad
- Highly sealed & durable the front polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed Waterproof enough to withstand all weather abuse. Package include 2pcS trailer marker ID bar with 2 hardware pack.
Wide application can be perfectly used on most 12v heavy duty trucks, cargo trailers, horse trailers, boat trailers, travel trailers, RV camper work vehicles, semi trailers, etc. Easy wire connection for wire connection white wire for ground black wire for low brightness tail light and red wire for high brightness brake light.
Light bar mounting to flush-mounting the light one option is to drill a center hole or use the existing hole to go through the back wire lead and then fix the two ends by drilling in the two screws provided The other option is to add some washer when fixing the two ends or use a bracket to mount the light to avoid drilling holes for the back wire lead.
Multi-functions each light has 11 high quality LED outputs high brightness and low brightness Can functions perfectly as parking light stop light turn signal light tail light and brake light.
|Warranty||2 Years Warranty|