As an Amazon Associate I earn from qualifying purchases.
dynofit #ad - Contents:2 x front strut spacers with Pro Shock-Proof box. 12. 9 grade premium bolts, excellent resistance to corrosion by black anodized surface.
Brand guarantee: 2 years warranty and feel free contact us with any problem, reply in 24 hours. Easy installation: installed in 1-2 hours and no special tools needed, true 3" raise, but the real thickness less than 3 inch.
TORCH Off Road #ad - Lifetime Warranty. Contents: front adjustable lift torsion Keys, Shock Extenders, Rear Tapered Lift Blocks, Extended U-Bolts and Hardware. Comes with step by step instructions for the DIY backyard mechanic.
Supreme Suspensions #ad - Note for z71 / ltz owners: *some ltz/z71 models have factory rear blocks pre-installed! Rear lift height will vary depending on the size of the factory block being replaced by our lift blocks. Please note that front spacer thickness to lift height is not a 1:1 ratio. 2015+ chevy/gmc vehicles equipped with factory stamped steel upper control arms will not support 3" or 3.
5" front lifts. Compatible with 2007 - 2020 chevrolet silverado 1500 & 2007 - 2020 gmc sierra 1500 6-lug - 2wd 4wd. Contents: 2x t6 billet aluminum top strut spacers, 4x square bend u-bolts, 2x High-Density Delrin Bottom Strut Spacers, 2x Axle Alignment Shims, Installation Instructions, Installation Hardware, 2x high-strength steel tapered lift Blocks, Supreme Suspensions Pro Pack.
5", or more. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers. Does not fit 2007 classic models or 2019+ silverado trailboss and sierra at4 models. These spacers are not compatible with models equipped with Adaptive Ride Control / MagneRide / Air-Bag / Auto-Ride / Air-Ride, or any other Self-Leveling Suspension System. Technical notes: 3. 5 inch front and 3 inch rear suspension lift.
Supreme Suspensions #ad - Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers. Compatible with 2007 - 2020 chevrolet silverado 1500 & 2007 - 2020 gmc sierra 1500 6-lug - 2wd 4wd. Installation: easy 2-4 hour installation process*.
Does not fit 2007 classic models or 2019+ silverado trailboss and sierra at4 models. Please note that front spacer thickness to lift height is not a 1:1 ratio. These spacers are not compatible with models equipped with Adaptive Ride Control / MagneRide / Auto-Ride / Air-Bag / Air-Ride, or any other Self-Leveling Suspension System.
5", or more. Contents: 2x t6 billet aluminum top strut spacers, installation hardware, 2x High-Density Delrin Bottom Strut Spacers, 4x square bend u-bolts, 2x High-Strength Steel Tapered Lift Blocks, Installation Instructions, Supreme Suspensions Pro Pack.2015+ chevy/gmc vehicles equipped with factory stamped steel upper control arms will not support 3" or 3. 5" front lifts. Technical notes: 3. 5 inch front and 3 inch rear suspension lift.
Megaflint #ad - Stable performance: raises trucks 3" in the front and 2" in the rear, providing higher ground clearance and fender clearance for larger tires and wheels, giving your truck a noticeably more aggressive look.
Recommend an alignment after installation. 3 years warranty: 100% money-back guarantee - if you're not satisfied, return back to us, no-hassle refund or product replacement. Easy to install: can be installed in about 1.
Corrosion resistance: the 3” front spacers are cnc machined out of 7075 aviation grade aluminum with G8 grade solid bolts & locknuts to match your suspension. Machine-manufactured precisely from 6061-T6 aircraft-grade aluminum billet, with heat-treated and hardened 109 grade bolts pre-installed.
Supreme Suspensions #ad - 2015+ chevy/gmc vehicles equipped with factory stamped steel upper control arms will not support 3" or 3. 5" front lifts. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers.
Important note: installation of aftermarket Uniball UCA is highly recommended on 2019+ models after lifting the front end by 2. 5", or more. Technical notes: 3. 5 inch front and 3 inch rear suspension lift. Does not fit 2007 classic models or 2019+ silverado trailboss and sierra at4 models.
Note for z71 / ltz owners: *some ltz/z71 models have factory rear blocks pre-installed! Rear lift height will vary depending on the size of the factory block being replaced by our lift blocks. No special tools required! *an alignment is always recommended if you are altering the height of your vehicle. The upper ball joint will wear out rapidly with use of stock UCA. Please note that front spacer thickness to lift height is not a 1:1 ratio.
MOTOFAB LIFTS #ad - Compatible with 2007-2018 chevrolet & GM 1500 Pickups. Made in the usa with a Lifetime warranty. Will raise your truck 3" in the front and 2" in the rear.
Supreme Suspensions #ad - Please note that front spacer thickness to lift height is not a 1:1 ratio. Contents: 2x billet aluminum lift strut spacers, 2x high strength Steel Tapered Lift Blocks, Installation Instructions, 4x Square Bend U-Bolts, Installation Hardware, Supreme Suspensions Pro Pack. These spacers are not compatible with models equipped with Adaptive Ride Control / MagneRide / Auto-Ride / Air-Bag / Air-Ride, or any other Self-Leveling Suspension System.
Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers.
2015+ chevy/gmc vehicles equipped with factory stamped steel upper control arms will not support 3" or 3. 5" front lifts. Compatible with 2007 - 2020 chevrolet silverado 1500 & 2007 - 2020 gmc sierra 1500 6-lug - 2wd 4wd. The upper ball joint will wear out rapidly with use of stock UCA. Does not fit 2007 classic models or 2019+ silverado trailboss and sierra at4 models. Technical notes: 3 inch front and 3 inch rear suspension lift.
MOTOFAB LIFTS #ad - Made in the usa with a Lifetime warranty. Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits. Motofab lifts are cnc machined out of billet aluminum then powdercoated black to match your factory suspension.
Rough Country #ad - Backed by rough Country's Lifetime Replacement Warranty. Increase ground Clearance for on and off-road obstacles. Give your silverado/sierra the Perfect Blend of Performance, Protection, and Style from Rough Country.
1. dynofit
#adGMC Sierra 2WD/4WD 2007-2019, 3" Front Leveling Lift Kits for Sil-verado 1500 2WD/4WD 2007-2019, Dynofit 3 Inch Front Strut Spacer Suspension Lift Kits Lift Spacers
#adBrand guarantee: 2 years warranty and feel free contact us with any problem, reply in 24 hours. Easy installation: installed in 1-2 hours and no special tools needed, true 3" raise, but the real thickness less than 3 inch.
More information #ad
Lift kit fitment: 2007-2019 sil-verado 1500 2wd/4wd, 2007-2019 gmc sierra 1500 2wd/4WD New Body Style with 6 lugs, please message us if need help or recommendation. Good looking on your truck and provide enough ground balance. Premium material: forged aircraft billet aluminum T6 treated.| Brand | dynofit #ad |
| Manufacturer | FASTFREE #ad |
| Part Number | FF-L001-3 |
More information #ad
2. TORCH Off Road
#adTORCH 3" Front 3” Rear LIFT Kit For 1999-2007 Chevy Silverado GMC Sierra 4X4 4WD 6 LUG Shock Extenders
#adMore information #ad
2-4 day delivery. Dedicated Customer Service. Fits: 1999-2007 chevy silverado gmc sierra 1500 4WD 4X4 Torsion Bar Suspension ONLY. Call or message us with any questions! Note: will not fit New Body Style. Ships same/next business day. Installation: bolt on kit.| Brand | TORCH Off Road #ad |
| Manufacturer | TORCH Off Road #ad |
| Part Number | 689355918712 |
More information #ad
3. Supreme Suspensions
#adFull Lift Kit for 2007-2020 Chevy Silverado/GMC Sierra 1500 3.5" Front Lift Strut Spacers + 3" Rear Lift Blocks + Square Bend U-Bolts + Axle Alignment Shims Black, Supreme Suspensions
#ad5" front lifts. Compatible with 2007 - 2020 chevrolet silverado 1500 & 2007 - 2020 gmc sierra 1500 6-lug - 2wd 4wd. Contents: 2x t6 billet aluminum top strut spacers, 4x square bend u-bolts, 2x High-Density Delrin Bottom Strut Spacers, 2x Axle Alignment Shims, Installation Instructions, Installation Hardware, 2x high-strength steel tapered lift Blocks, Supreme Suspensions Pro Pack.
More information #ad
Important note: installation of aftermarket Uniball UCA is highly recommended on 2019+ models after lifting the front end by 2. 5", or more. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers. Does not fit 2007 classic models or 2019+ silverado trailboss and sierra at4 models. These spacers are not compatible with models equipped with Adaptive Ride Control / MagneRide / Air-Bag / Auto-Ride / Air-Ride, or any other Self-Leveling Suspension System. Technical notes: 3. 5 inch front and 3 inch rear suspension lift.
| Brand | Supreme Suspensions #ad |
| Manufacturer | Supreme Suspensions #ad |
| Weight | 20 Pounds |
| Part Number | AZM 440(3R)(650) pro blk |
More information #ad
4. Supreme Suspensions
#adSupreme Suspensions, 3.5" Front + 3" Rear Lift Kit for 2007-2020 Chevrolet Silverado and GMC Sierra 1500 Top & Bottom Strut Spacers + Rear Lift Blocks + Square Bend U-Bolts Black
#adDoes not fit 2007 classic models or 2019+ silverado trailboss and sierra at4 models. Please note that front spacer thickness to lift height is not a 1:1 ratio. These spacers are not compatible with models equipped with Adaptive Ride Control / MagneRide / Auto-Ride / Air-Bag / Air-Ride, or any other Self-Leveling Suspension System.
More information #ad
Please check block size before ordering as our lift block is intended to replace any factory equipped blocks. Important note: installation of aftermarket Uniball UCA is highly recommended on 2019+ models after lifting the front end by 2. 5", or more. Contents: 2x t6 billet aluminum top strut spacers, installation hardware, 2x High-Density Delrin Bottom Strut Spacers, 4x square bend u-bolts, 2x High-Strength Steel Tapered Lift Blocks, Installation Instructions, Supreme Suspensions Pro Pack.2015+ chevy/gmc vehicles equipped with factory stamped steel upper control arms will not support 3" or 3. 5" front lifts. Technical notes: 3. 5 inch front and 3 inch rear suspension lift.
| Brand | Supreme Suspensions #ad |
| Manufacturer | Supreme Suspensions #ad |
| Weight | 23 Pounds |
| Part Number | AZM 440(STB6)(blk)(pro) |
More information #ad
5. Megaflint
#ad3" + 2" Full Lift Leveling Kit For 2007-2020 Chevy Silverado GMC Sierra 1500 2007-2019 Chevy Silverado 1500 GMC Sierra
#adRecommend an alignment after installation. 3 years warranty: 100% money-back guarantee - if you're not satisfied, return back to us, no-hassle refund or product replacement. Easy to install: can be installed in about 1.
More information #ad
5-2 hours and does not require strut/coil disassembly like other kits. Maintains your original OEM ride quality, steering quality and driving comfort. Fitment: fits 2007-2020 chevrolet silverado 1500 & gmc sierra 1500 For 2007-2019 gmc sierra 1500 2wd 4WD. Corrosion resistance: the 3” front spacers are cnc machined out of 7075 aviation grade aluminum with G8 grade solid bolts & locknuts to match your suspension. Machine-manufactured precisely from 6061-T6 aircraft-grade aluminum billet, with heat-treated and hardened 109 grade bolts pre-installed.
| Brand | Megaflint #ad |
| Manufacturer | megaflint #ad |
| Part Number | MF |
More information #ad
6. Supreme Suspensions
#adFull Lift Kit for 2007-2020 Silverado Sierra 1500 3.5" Front Strut Spacers + 3" Rear Lift Blocks + Square Bend U-Bolts + Shock Mount Extenders, Supreme Suspensions
#adImportant note: installation of aftermarket Uniball UCA is highly recommended on 2019+ models after lifting the front end by 2. 5", or more. Technical notes: 3. 5 inch front and 3 inch rear suspension lift. Does not fit 2007 classic models or 2019+ silverado trailboss and sierra at4 models.
More information #ad
These spacers are not compatible with models equipped with Adaptive Ride Control / Auto-Ride / Air-Bag / MagneRide / Air-Ride, or any other Self-Leveling Suspension System. Please check block size before ordering as our lift block is intended to replace any factory equipped blocks. Note for z71 / ltz owners: *some ltz/z71 models have factory rear blocks pre-installed! Rear lift height will vary depending on the size of the factory block being replaced by our lift blocks. No special tools required! *an alignment is always recommended if you are altering the height of your vehicle. The upper ball joint will wear out rapidly with use of stock UCA. Please note that front spacer thickness to lift height is not a 1:1 ratio.
| Brand | Supreme Suspensions #ad |
| Manufacturer | Supreme Suspensions #ad |
| Weight | 26 Pounds |
| Part Number | AZM 440(3R)(blk)(57) |
More information #ad
7. MOTOFAB LIFTS
#adMotoFab Lifts CH-3F-2R 3 in Front and 2 in Rear Leveling lift kit that is compatible with 2007-2018 Chevy Silverado Sierra GMC
#adMore information #ad
Motofab lifts are cnc machined out of billet aluminum then powdercoated black to match your factory suspension. Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits.| Brand | MOTOFAB LIFTS #ad |
| Manufacturer | MotoFab Lifts #ad |
| Height | 6 Inches |
| Length | 8 Inches |
| Width | 8 Inches |
| Part Number | CH-3F-2R |
| Warranty | Lifetime warranty |
More information #ad
8. Supreme Suspensions
#ad3" Front + 3" Rear Full Suspension Lift Kit for 2007-2020 Chevrolet Silverado & GMC Sierra 1500 2WD 4WD Black, Supreme Suspensions
#adStrut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers.
More information #ad
Important note: installation of aftermarket Uniball UCA is highly recommended on 2019+ models after lifting the front end by 2. 5", or more. Note for z71 / ltz owners: *some ltz/z71 models have factory rear blocks pre-installed! Rear lift height will vary depending on the size of the factory block being replaced by our lift blocks. 2015+ chevy/gmc vehicles equipped with factory stamped steel upper control arms will not support 3" or 3. 5" front lifts. Compatible with 2007 - 2020 chevrolet silverado 1500 & 2007 - 2020 gmc sierra 1500 6-lug - 2wd 4wd. The upper ball joint will wear out rapidly with use of stock UCA. Does not fit 2007 classic models or 2019+ silverado trailboss and sierra at4 models. Technical notes: 3 inch front and 3 inch rear suspension lift.
| Brand | Supreme Suspensions #ad |
| Manufacturer | Supreme Suspensions #ad |
| Weight | 22 Pounds |
| Part Number | AZM 294(3R)(Blk)(Pro) |
More information #ad
9. MOTOFAB LIFTS
#adMotoFab Lifts CH-3F-1R 3 in Front and 1 in Rear Leveling lift kit that is compatible with 2007-2019 Chevy Silverado Sierra GMC
#adMore information #ad
Will raise your truck 3" in the front and 1" in the rear replaces factory rear block. Compatible with 2007-2019 chevrolet & GM 1500 Pickups.| Brand | MOTOFAB LIFTS #ad |
| Manufacturer | MotoFab Lifts #ad |
| Height | 6 Inches |
| Length | 8 Inches |
| Width | 8 Inches |
| Part Number | CH-3F-1R |
| Warranty | Lifetime warranty |
More information #ad
10. Rough Country
#ad28300, Rough Country 2.5" Leveling Lift Kit for 1999-2006 Chevy/GMC 1500 4WD
#adMore information #ad
Maintains factory ride Quality. Installation and Product Support Provided by RC. Durable forged torsion Keys. Fabricated blocks are stronger and a longer lifespan than cast blocks.| Brand | Rough Country #ad |
| Manufacturer | Rough Country #ad |
| Height | 6 Inches |
| Length | 25.5 Inches |
| Weight | 26.18 Pounds |
| Width | 5.75 Inches |
| Part Number | 28300 |
| Model | 28300 |
| Warranty | Limited Lifetime |
More information #ad
