As an Amazon Associate I earn from qualifying purchases.
1. ARTR #ad
ARTR Titanium 2 Inch x 50 Feet Exhaust Header Wrap Kit with 10pcs 11.8 Inch Stainless Steel Locking Ties #adARTR #ad
- Withstands 1800f direct/2500F intermittent heat. Outperforms cheap aftermarket colored fiberglass tape insulation wraps. Reduces temperature & vibration breakdown.
Promotes increased flow for improved performance. It is better to soak wraps in water and wear gloves for installation. Universal application. 2 inch wide and 50 feet long.
2. DC Sports #ad
DC Sports NHC4202 Infiniti G35 Sedan Ceramic Header #adDC Sports #ad
- Constructed of t409ss alloy with ceramic coating. Dyno tuned and tested for maximum performance. Includes instructions and all necessary hardware. Easy direct bolt-on replacement part. Fit type: Vehicle Specific.
|Brand||DC Sports #ad|
|Manufacturer||DC Sports #ad|
3. BLACKHORSE-RACING #ad
BLACKHORSE-RACING 4" Cold Air Intake System Kit with Heat Shield Filter Compatible with Chevy GMC 1999 2000 2001 2002 2003 2004 2005 2006 V8 4.8L/5.3L/6.0LBlack #adBLACKHORSE-RACING #ad
- Specificationdimensions: 9. 67 x 11. 81 x 9. 45" / 950 x 30 x 24cm l x W x H. Efficacydesigned to increasing 8-10% horsepower & 6-10% torque, and creating an attractive intake noise.
Compatible with1999 2000 2001 2002 2003 2004 2005 2006 v8 4. 8l/5. 3l/6. 0ldon't fit 2006 ford f250 lariat 6. 0 Advantagehigh quality and efficient air intake system, fits automatic and manual transmission, the filters are washable, reusable and easy to install with tools commonly available.
Cold air intake kit it's the ultimate performance cold Air Intake Kit with Heat Shield， The air intake kit can help your engine to draw in more cold air resulting in better throttle response and higher explosive horsepower output.
4. OCPTY #ad
Exhaust Header OCPTY Shorty Engine Conversion Swap Truck Stainless Steel Header For CHEVY For GMC Trucks LS1 LS2 LS3 C-10 LS Pickups #adOCPTY #ad
- Direct fit - guaranteed to fit and meet the quality standards of the original parts being replaced. Since the products are suitable for special fields, we strictly tested them before they leaving the factory. Warm tips - please check the original equipment part numbers and the application for the replacement, buy the right one you need.
Models - exhaust manifolds for 02 for chevrolet blazer 4. 2l 83 84 for chevrolet s10 blazer 2. 0l 87 88 89 90 91 for gmc jimmy 5. 7l 82 83 84 85 86 87 88 89 90 91 for gmc jimmy 6.
2l 94 95 96 97 98 99 00 01 02 03 for gmc sonoma 2. 2l 91 92 93 for gmc sonoma 2. 5l 91 92 93 for gmc sonoma 2. 8l 91 92 93 94 95 96 97 98 99 00 01 02 03 04 for gmc Sonoma 4. 3l 91 92 93 94 96 97 98 99 00 01 for oldsmobile Bravada 4.
3l. Features include - mandrel bent tubing+full 1 5/8" primaries +2 1/2" Collector+V-Band Collector Construction+Collector Merge Spikes+Port Matched Flanges. Performance - the ocpty exhaust manifolds was constructed with stainless tubular, what's more, which has superior sealing features, prevent against cracking and warping deteriorating under tremendous heat and pressure, it's not easy to rust and corrode under chemical environment and has excellent creep resistance.
5. Yonaka Motorsports #ad
Yonaka 4-1 Polished Stainless Steel Header Compatible/Replacement for Honda Acura B-Series #adYonaka Motorsports #ad
- Solid stainless steel construction. Immediately adds torque and up to 12 hp. 2. 5" collector flange. Fits any b16a/b16b/b18c1/b18C5 motor. Direct bolt on fitment, includes new upper gasket.
6. LucaSng #ad
6.0L, 6.2L Engine Forward Facing Up 1 3/4" Primaries,For 1997-2014 Chevy Small Block, LucaSng LS Turbo Headers For LSX, LS3, LS6 4.8L, 5.3L, 5.7L, LS1, LS2 #adLucaSng #ad
- Fitment:ls turbo manifold fits ls1, 6. 0l, 5. 7l, 5. 3l, lsx 4. 8l, ls3, ls6, ls2, ls4, 6.2l v8 engines 1997-2014. 1-3/4” and 1-7/8” tubing diameters available for increased exhaust flow increasing performance and improved throttle response ;3” collector for maximum strength and exhaust flow.
Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability. Note: headers are not equal length, due to the ls cylinder heads being offset approx 1 /2" from the factory Note: Headers do not utilize the factory coil locations.
It is also not recommend due to heat & clearance. Cnc mandrel-bent tubes provide consistent tubing diameters for smooth flow and increases the cylinder scavenging effect. Note: these are universal turbo headers and are not designed to work with any specific application or accessory.
7. DiabloSport #ad
DiabloSport 8245 inTune i3 Platinum Performance Programmer 3rd Generation inTune inTune i3 Platinum Performance Programmer #adDiabloSport #ad
- 8245 platinum is for GM allow custom tunes. This product will not work on Hybrid or E-Assist vehicles. Diablosport 8245.
8. salangid #ad
Compatible with GM V8 V6 Engine, RA003 Active Fuel Management AFM Disable Device #adsalangid #ad
- The product will not reprogram the factory ECU, so that the car is always in full cylinder mode. After the device is plugged into the port, four lights will flash in sequence, and only one light will be on when it is stable.
2. If you do not use it for a long time, please unplug the device to avoid loss of equipment life. 4. Please confirm whether your model is suitable before buying. 1. Replacement for range Technology AFM Disable Device RA003. 3. Keep the vehicle in v8 or V6 mode, easy to operate, just plug in the diagnostic port. 5.
9. cciyu #ad
CCIYU Exhaust Manifold Header Fit for GMT C/K 5.0/5.7 SBC 1984 1985 1986 1987-1991 Stainless Steel Header Manifold Exhaust #adcciyu #ad
- Oe product - we are committed to the original OE parts direct replacement, no need to modify or replace other accessories. Part numbers - HDSCC63. Compatibility - for gmc c1500 1984-1986 1988-1991 for gmc c1500 suburban 1985-1986 for gmc c2500 1984-1986 1988-1991 for gmc c2500 suburban 1984-1986 for gmc c3500 1984-1986 1988-1991 for gmc g1500 1985-1991 for gmc g2500 1984-1991 for gmc g3500 1984-1991 for gmc jimmy 1984-1991 for gmc k1500 1984-1986 1988-1991 for gmc k1500 suburban 1984-1986 for gmc k2500 1984-1986 1988-1991 for gmc k2500 suburban 1985-1986 for gmC K3500 1984-1986 1988-1991 For GMC P2500 1984-1989 For GMC P3500 1984-1991.
Warm tips - most satisfied replis will be offered if any problem or defect occurs. Features - better air flow design, improves exhaust velocity performance, offers great flow and higher power, leak-resistant for long-lasting performance.
10. ECCPP #ad
ECCPP Exhaust System HDSHC01EX Replacement Exhaust Manifolds Fit for 01-05 For Honda CIVIC EX 1.7 D17A2 4CYL #adECCPP #ad
- Package and warranty - 1*exhaust manifold Kit hardware as the listing shown; 12 months warranty;Please contact us firstly if you have any question. Features - direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold.
A rigorous quality inspection has been taken to ensure it conforms to product standards. Fitment - header inlet / outlet size in: 1.
5" / 2. 25";replacement exhaust manifold for 2001 2002 2003 2004 2005 for honda civic EXFit Models with D17A2 1. 7l 4cyl engines onlyfor year and model, Please Check Compatibility Compatible with HDSHC01EX Pipe.
Advantage - exhaust manifold with cast Iron tubular construction has strong anti-corrosive; Cast Iron tubular construction can protects against warping or cracking, leak-resistant for long-lasting performance. Notice - please check the description and compatibility chart before your purchasing. Please contact us if you have any question.