Top 10 Hill Country Custom Cycles Ape Hangers – Powersports Handlebars

As an Amazon Associate I earn from qualifying purchases.

1. Hill Country Custom Cycles

#ad

BC-HC-11416N-ST06, Hill Country Customs 1 1/4" Chrome Narrow 16" Ape Hanger Handlebar Kit 1996-2006 Harley Softail

#ad
Hill Country Custom Cycles #ad - Please read the additional features and description sections in this listing and then advise us of your harleys: year, part #: hc-hbb101. We include the handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley model. Protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.

Note: you must provide us with the info about your harley as shown in bullet point #5 so we can assemble your kit! - This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. Fits 1996-2006 harley softail models with single front disc brakes, except for Springers. Installation kits are also available: 1996-1999 model part #: hc-hik-11b, we recommend replacing the riser bushings, 2000-2005 model part #: HC-HIK-12B, Handlebar Riser Height? 1"-6" tall does it have a Hydraulic Clutch? While installing these bars, Exact Model #, 2006 model part #: HC-HIK-13B.

Stainless braided cables and brake lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time. Turn signal light extensions are not included and we recommend mounting the turn signals close to the headlight for safety when riding at night. Color coded wire extensions are included to extend all stock handlebar controls harnesses for your new handlebars and include factory pins installed. There are extensions available in our store which you can purchase if you want to mount the lights up high.
BrandHill Country Custom Cycles #ad
ManufacturerHill Country Custom Cycles #ad
Weight15 Pounds
Part NumberBC-11416N-ST06

2. Hill Country Custom Cycles

#ad

Hill Country Customs 1 1/4" Chrome 16" Ape Hanger Handlebar Kit for 1996-2006 Harley Road Glide, Road King models without Cruise Control, BSC-11416C-RGK06-NC

#ad
Hill Country Custom Cycles #ad - Stainless braided cables and brake lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time. Fits 1996-2006 harley road king and road glide models without cruise control and without ABS brakes. Please read the additional features and description sections in this listing and then advise us of your harleys: year, exact model #, does it have cruise control? fuel injection? Hydraulic Clutch? While installing these bars, 1999-2004 model part #: hc-hik-02b, we recommend replacing the riser bushings, part #: HC-HBB102 and installing the 1 piece top clamp: 55918-08 Installation kits are also available: 1996-1998 model part #: HC-HIK-01B, 2005-2006 model part #: HC-HIK-03B.

Protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.

If you have heated grips, you will need to purchase part # 2120-0498 heated grip extensions which are available in our store. Color coded wire extensions are included to extend all stock handlebar controls harnesses for your new handlebars. Handlebar specs are:  height 16"  Total Width 36"  Center Width 105"  pullback 7. 5". Note: you must provide us with the info about your harley as shown in bullet point #5 so we can assemble your kit! - This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon.
BrandHill Country Custom Cycles #ad
ManufacturerHill Country Custom Cycles #ad
Weight15 Pounds
Part NumberBSC-11416C-RGK06-NC

3. Hill Country Custom Cycles

#ad

Hill Country Customs 1 1/4" Chrome Narrow 16" Ape Hanger Handlebar Kit 1996-2006 Harley Road Glide, Road King models with Cruise Control, BSC-11416N-RGK06-C

#ad
Hill Country Custom Cycles #ad - Handlebar specs are:  height 16"  total Width 34"  Center Width 10"  Pullback 7. 5". Please read the additional features and description sections in this listing and then advise us of your harleys: year, we recommend replacing the riser bushings, exact model #, part #: hc-hbb102 and installing the 1 piece top clamp: 55918-08 installation kits are also available: 1996-1998 model part #: HC-HIK-01B, Does it have Cruise Control? Fuel Injection? Hydraulic Clutch? While installing these bars, 1999-2004 model part #: HC-HIK-02B, 2005-2006 model part #: HC-HIK-03B.

Fits 1996-2006 harley road king and road glide models with cruise control and without ABS brakes. Protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life. Color coded wire extensions are included to extend all stock handlebar controls harnesses for your new handlebars. Stainless braided cables and brake lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time.

Note: you must provide us with the info about your harley as shown in bullet point #5 so we can assemble your kit! - This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. Harley heated grips will not work with these bars since the heater won't fit inside. We include the handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley model.
BrandHill Country Custom Cycles #ad
ManufacturerHill Country Custom Cycles #ad
Weight15 Pounds
Part NumberBSC-11416N-RGK06-C

4. Hill Country Custom Cycles

#ad

Hill Country Customs 1 1/4" Chrome 16" Ape Hanger Handlebar Kit 1996-2006 Harley Softail, BC-HC-11416C-ST06

#ad
Hill Country Custom Cycles #ad - Color coded wire extensions are included to extend all stock handlebar controls harnesses for your new handlebars and include factory pins installed. Protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life. Installation kits are also available: 1996-1999 model part #: HC-HIK-11B, 2006 model part #: HC-HIK-13B.

Note: you must provide us with the info about your harley as shown in bullet point #5 so we can assemble your kit! - This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. We include the handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley model. Turn signal light extensions are not included and we recommend mounting the turn signals close to the headlight for safety when riding at night.

Stainless braided cables and brake lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time. Handlebar specs are: height 16"  Total Width 36"  Center Width 105"  pullback 7. 5". Fits 1996-2006 harley softail models with single front disc brakes, except for Springers. There are extensions available in our store which you can purchase if you want to mount the lights up high.
BrandHill Country Custom Cycles #ad
ManufacturerHill Country Custom Cycles #ad
Weight15 Pounds
Part NumberBC-11416C-ST06

5. kemimoto

#ad

12" Rise Ape Hangers Rise Ape Z Hangers Handlebar For Electra Glide Street Glide Ultra Limited 1-1/4''

#ad
kemimoto #ad - Go and check further applicable models in Product Description. 1-1/4" diameter. Center section tapers to 1" so standard handlebar controls fit. Size: 12 rise classical z bar.

Power-coated surface: our 12 inch rise ape hanger handlebars are all attractive, rust-resistant and of great prevention from scratch. 3-1/2 " on-center knurling for firm mounting. 11" backward sweep. If you have any concern regarding these products, please kindly feel free to contact us. 37" wide from tip to tip. Fitment:the product fits for most electra Glide, Street Glide, Tri Glide and Ultra Limited. Note: our ape handlebars are 100% brand New Aftermarket. Durable: this electra glide handlebar is made of high-quality iron and come with drilled wiring holes, whcih will lead to good working condition and easy installation.
Brandkemimoto #ad
Manufacturerkemimoto #ad
Part Number1813-501BK

6. XFMT

#ad

XFMT Black 14" Rise 1-1/4" Ape Custom Hangers Handlebar For Harley Softail FLST FXST Sportster XL 883 1200

#ad
XFMT #ad - Fitment: fit for all harley-davidson flst, including Throttle-by-wire models, sportster XL, FXST, and any Custom Application. Condition: aftermarket 100% Brand New! Made of high quality durable Iron, Black finish. 14" rise. 34-1/2" wide from tip to tip, come with drilled wiring holes, Good Working Condition and Easy to Install. 1 1/4"-diameter handlebar, Center section and tips taper to 1" so that standard handlebar controls fit. Package included: 1 x Ape Handlebar.
BrandXFMT #ad
ManufacturerXFMT #ad
Part NumberB-001-31

7. XMT-MOTO Motorcycle Parts

#ad

FXST, and any Custom,Chrome, XMT-MOTO Custom Vintage 14" Rise Ape Hangers Handlebar fits for All Harley-Davidson FLST, including Throttle-by-wire models, Sportster XL

#ad
XMT-MOTO Motorcycle Parts #ad - 34-1/2" wide from tip to tip, Come with drilled wiring holes. Aftermarket parts 100% Brand New. With always fast and free shipping on every order, focusing on Quality and Service, so you can shop with confidence. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. 14" rise. To fits for all harley-davidson flst, Sportster XL, including Throttle-by-wire models, FXST, and any Custom Application.
BrandXMT-MOTO Motorcycle Parts #ad
ManufacturerXMT-MOTO Motorcycle Parts #ad
Part NumberXMT-BJ1742-NEW-01

8. TCMT

#ad

TCMT 18" Rise 1-1/4" Ape HangerBar Handlebar Fits For Harley Sportster 883 XL883 XL FLST FXST

#ad
TCMT #ad - Color: chrome; Material: Iron. Buyer needs to check the application according to the measurement above. Condition: aftermarket 100% brand new;Feature:High class quality and very durable, Good Working Condition and Easy to Install. 1 1/4"-diameter center section tapers to 1' so that standard handlebar controls fit. 18" rise. To fit for all harley-davidson flst, sportster xl, including Throttle-by-wire models, FXST, and any Custom Application. Package included: 1 x Handlebar As picture shown.
BrandTCMT #ad
ManufacturerTCMT #ad
Part NumberUS-XF161030-01-E-18

9. Dominator Industries

#ad

Gloss Black Compatible With 1996-2020 Electra Glide FLH, Dominator Industries 1 1/4 inch Miter Cut Bagger Ape Handlebar, 10 inch Rise, and Street Glide FLHX, Ultra Classic FLHTC

#ad
Dominator Industries #ad - Furthermore, our five star customer service, customized Products, and Limited Lifetime Warranty Will Make Dominator a Partner You and Your Bike can Partner with for Years to COME. We have engineered them to be direct bolt-on replacements for stock equipment. Model compatibility: fits 1996-2020 model years of the harley-davidson electra glide flh, 13 inch, 14 inch, Electra Glide Classic FLHTC, 12 inch, and the Street Glide FLHX - Excluding Screaming Eagle models.

Dominator: a name you can trust: dominator cycles is a name you can trust. All of our bars are carefully designed to provide natural, beveled & de-burred for easy internal wire pulling, fully TIG welded, relaxed grip angles combined with optimal pullback comfort. We produce high quality handlebars right Here in the States. Ready to go: our handlebars are properly plumbed for internal Wiring and Notched for TBW Applications.

Control compatibility: this 1 1/4 inch miter cut Bagger Ape is Compatible with all the stock cables & controls on 1996-2020 Street Glide. No slag inside the bar tubes makes installation easy. What does this mean? less time installing your handlebars and More Time RIDING! Quality: hand made in the usa - laser cut, and polished to show quality finish. Available with 10 inch, and 16 inch rise in Chrome or Gloss Black Finish.
BrandDominator Industries #ad
ManufacturerDominator Industries #ad
Part NumberBA10GLOSSBLACK

10. XFMT

#ad

XFMT Chrome 1 1/4" 14" Rise Ape Hanger Handle Bar Compatible with Harley Touring Dressers Baggers 1982-2020

#ad
XFMT #ad - Diameter: 1. 25" rise: 14" width: 37" Center Width: 18". To fit harley-davidson touring models, dressers, flht, Baggers, FLHTC from 1982 to present including. Feature:high class quality and very durable, Good Working Condition and Easy to Install. 1. 25"-diameter. Aftermarket 100% brand New Color: Chrome Material: Iron. Center section and tips taper to 1" so that standard handlebar controls fit. May work on throttle-by-wire models with custom fitting and any custom application.
BrandXFMT #ad
ManufacturerXFMT #ad
Part NumberA-002-80E