Top 10 Fan Blade Spacer Bolts – Automotive Replacement Engine Cooling & Climate Control

As an Amazon Associate I earn from qualifying purchases.

1. Southwest Speed

#ad

2 PATTERNS TO FIT ALMOST ALL CHEVY AND FORD WATER PUMPS, NEW SOUTHWEST SPEED RACING 3" BILLET ALUMINUM FAN SPACER

#ad
Southwest Speed #ad - Spaces fan out 3". Anodized black. Comes complete with all bolts and washers, as well as a fan hub adapter bushing to allow the spacer to work with both 5/8" and 3/4" shafts. Brand new southwest speed 3" billet Aluminum Fan Spacer SWS Part # 410-508. Lightweight billet 6061-T6 aluminum construction.
BrandSouthwest Speed #ad
ManufacturerSouthwest Speed #ad
Height0 Inches
Length0 Inches
Weight0 Pounds
Width0 Inches
Part Number410-508
Model410-508
WarrantyParts

2. Dumble

#ad

6in White RV Bathroom Fan Blade Replacement Camper Fan Blade, Dumble Fan Blades Replacement with 0.094in D-Bore

#ad
Dumble #ad - Goodbye moisture & smells: use the dumble | 6-inch white RV Fan Blades Replacement with D-Bore 1-Pack to rid your RV or camper of lingering smells in the bathroom and built-up moisture. Counter-clockwise rotation: this 6 inch fan blade rotates counter-clockwise; To determine the direction of spin on your existing fan, look down through the motor at the top of the blade; If these replacement fan blades rotate in the wrong direction, simply reverse the wires on the motor to change the direction the fan rotates.

Fits your rv: 6-inch 15. 2cm overall diameter 2-inch x 1. 5-inch / 5. 1cm x 3. 8cm individual blades; 1. 75-inch / 4. 4cm diameter center bore plate; 2/25-inch x 3/25-inch 2mm x 3mm diameter center D-bore hole that is compatible with Elixir, Jensen, Heng's, and Ventline roof vents and range hoods or any 12 Volt motor with a 0.094-inch D-shaped shaft. Easy to install: measure your fan shaft hole diameter and check to see if it is round or d-shaded bore this replacement fan blade has a 2/25-inch x 3/25-inch / 2mm x 3mm D-bore; Determine the desired direction of airflow, carefully pull off the existing fan blades, apply a small amount of lubricant spray or liquid soap on the shaft and in the "hole" of the replacement fan blade, press the new replacement fan blade onto the motor shaft.

Built to last: constructed from durable plastic for maximum longevity that resists rust and corrosion; White in color to match your existing fan cover.
BrandDumble #ad
ManufacturerDumble #ad
Height0.8 Inches
Length6 Inches
Weight0.04 Pounds
Width6 Inches
Part Number5593

3. Flex-a-lite

#ad

Flex-a-lite 14556 Mill Finish 2" Fan Spacer Kit

#ad
Flex-a-lite #ad - One year manufacturer warranty. Spacer thickness 2". Kit comes with 5/16" bolts and washers to eliminate fan clutch from fan assembly. 1 year manufacturers warranty. 2" thick for proper spacing when attaching fan.
BrandFlex-a-lite #ad
ManufacturerFlex-A-Lite #ad
Height2.2 Inches
Length8.5 Inches
Weight1 Pounds
Width6 Inches
Part Number14556
Model14556
WarrantyWarranty, Parts: Parts, Warranty, Labor: Authorized Dealer - Full Manufacturer's Warranty Applies

4. Flex-a-lite

#ad

Flex-a-lite 14544 Mill Finish 1/2" Fan Spacer Kit

#ad
Flex-a-lite #ad - One year manufacturer warranty. 1/2" thick for proper spacing when attaching fan. Kit comes with 5/16" bolts and washers to eliminate fan clutch from fan assembly. 1 year manufacturers warranty. Spacer thickness. 50".
BrandFlex-a-lite #ad
ManufacturerFlex-A-Lite #ad
Height6 Inches
Length5 Inches
Weight1 Pounds
Width10 Inches
Part Number14544
Model14544
WarrantyWarranty, Parts: Parts, Warranty, Labor: Authorized Dealer - Full Manufacturer's Warranty Applies

5. Canton Racing Products

#ad

Canton Racing 75-620 2" Fan Spacer Billet Aluminum with Bolts for Chevy and Ford, 1 Pack

#ad
Canton Racing Products #ad - Made in USA. Lightweight And Strong. This fan spacer extends the fan 2 inches off the water pump flange. Billet Aluminum. It comes with bolts and an adapter bushing for 5/8" and 3/4" water pump shafts. Designed to fit both Chevy and Fords.
BrandCanton Racing Products #ad
ManufacturerCanton Racing Products #ad
Height8.25 Inches
Length2.75 Inches
Weight0.86 Pounds
Width7.5 Inches
Part Number75620
Model75-620

6. Derale

#ad

Derale 31515 1 1/2" Fan Spacer,Silver

#ad
Derale #ad - Anodized clear finish. 1-1/2 inch length with 5/8 inch female pilot. Aluminum construction. Fine and course 5/16 inch thread hardware included.
BrandDerale #ad
ManufacturerDerale #ad
Height2.25 Inches
Length7.88 Inches
Weight0.1 Pounds
Width4.75 Inches
Part Number31515
Model31515
WarrantyLimited One Year

7. Bryke Racing

#ad

3" Aluminum Fan Spacer Bryke Racing

#ad
Bryke Racing #ad - Includes bushing. Spacers work with 1 3/4" circle flange. Machined billet aluminum. Lightweight billet aluminum construction/Anodized black. Bolts included.
BrandBryke Racing #ad
ManufacturerBryke Racing #ad
Part Number603-103

8. Derale

#ad

Derale 31500 1/2" Fan Spacer

#ad
Derale #ad - 1/2 inch length with 5/8 inch female pilot. Anodized clear finish. Fine and course 5/16 inch thread hardware included. Aluminum construction.
BrandDerale #ad
ManufacturerDerale #ad
Height1.5 Inches
Length7.88 Inches
Weight0.45 Pounds
Width4.75 Inches
Part Number31500
Model31500
WarrantyLimited One Year

9. Canton Racing Products

#ad

Canton Racing 75-630 3" Fan Spacer Billet Aluminum with Bolts for Chevy and Ford

#ad
Canton Racing Products #ad - Designed to fit both Chevy and Fords. Lightweight And Strong. Billet Aluminum. It comes with bolts and an adapter bushing for 5/8" and 3/4" water pump shafts. Made in USA. This fan spacer extends the fan 3 inches off the water pump flange.
BrandCanton Racing Products #ad
ManufacturerCanton Racing Products #ad
Height8.25 Inches
Length2.75 Inches
Weight1.03 Pounds
Width7.5 Inches
Part Number75630
Model75-630

10. Dorman

#ad

Dorman 621-104 Engine Cooling Fan Blade for Select Cadillac/Chevrolet/GMC Models

#ad
Dorman #ad - Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage. Quality tested - has undergone testing to ensure proper fit and performance. Direct replacement - this engine cooling fan blade fits and functions like the original equipment fan blade. Excellent value - original equipment quality at a lower price. Quality construction - manufactured from premium materials for a long service life.
BrandDorman #ad
ManufacturerDorman #ad
Height3.15 Inches
Length19.7 Inches
Weight3.49 Pounds
Width19.7 Inches
Part Number621-104
Model621-104
WarrantyLimited Lifetime Warranty