Top 10 EZ Pass Toll Tag Holder – Visor Accessories

As an Amazon Associate I earn from qualifying purchases.

1. JL Safety

#ad

Indestructible Holder fits Mini & Old Size EZ Pass not The Flex or HOV Switch Models, I Zoom, PalPass Hard case & FasTrak transponders. Holder only- Made in USA, I Pass, JL Safety EZ Pass-Port

#ad
JL Safety #ad - Will never melt, break, or deform. Easily install and remove your transponder when needed. Slip-fit that tightly and gently holds your old or new transponder in place. Unlike other holders, it will not spin, rattle, discolor, deform, or bend. No adhesive needed. Made from steel to handle extreme temperatures. Industrial grade suction cup that holds through the hot and cold conditions.
BrandJL Safety #ad
ManufacturerJL Safety #ad
Height1.5 Inches
Length2 Inches
Weight0.04 Pounds
Width2.25 Inches
Part NumberEZP300
ModelEZP300

2. Allinko

#ad

FasTrak, PalPass, Elite Pass, Toll Pass Tag Windshield Mount, I Zoom, PrePass, Allinko Toll Pass Holder for EZ Pass, I Pass, Quick Pass

#ad
Allinko #ad - High temperature performance will withstand up to 200 degrees. Fits all new toll transponders: our pass holder offers compatibility with a wide range of toll transponders including: the old and new EZ Pass, PalPass, Quick Pass, FasTrak, I Pass, I Zoom, PrePass, Elite Pass, Fast Lane HOV Switch model.

Long lasting: dual industrial grade suction cups allow you to firmly mount your toll transponder to your windshield without the sticky mess of a permanent adhesive. Four strips included: won't shake, or fall of. Easy to install and remove: the toll pass Holder attaches to your windshield using dual suction cups making it easy to install, easy to remove and easy to switch between vehicles.

Water, buzz, dirt, block signals, rattle, and UV resistant. Compact and durable design: compact design that hides behind the smallest tall tag and your toll pass including the holder can easily be hidden behind your rearview mirror.
BrandAllinko #ad
ManufacturerAllino #ad
Height0.39 Inches
Length2.13 Inches
Width1.69 Inches
Part NumberAL09111856
ModelToll Pass Holder
Warranty24-Month Guarantee

3. Toolfetch

#ad

Heat & Cold Resistant! Fits Mini and Old EZ Pass, PalPass Hard case and FasTrak Transponders, I Zoom, I Pass, EZ Pass Toll Tag Holder

#ad
Toolfetch #ad - Fits old & new i-pass, palpass, ez-pass not hov switch models, QuickPass, FasTrak Not for Latest Fastrak Transponders. Easy to open - frustration free plastic packaging! Just open and use! All instructions can be Found below and Use the Images Provided as a Guide! Suction cup attachment for easy installation! Installs within Seconds! Highly weather resistant and can resist heat and cold.
BrandToolfetch #ad
ManufacturerToolfetch #ad
Part NumberTF-EZP300
Model8542113463

4. eZpassClip

#ad

Small Toll Tag Transponder Black, eZpassClip New EZ Pass Holder for New

#ad
eZpassClip #ad - Ezpassclip is your mounting solution for the new-style transponder. Simply slide up your electronic toll tag and you're done! Ezpassclip is proudly made in the USA of high density, UV resilient plastic.

Ezpassclip makes it easy to use your electronic toll tag in multiple vehicles or simply remove it to prevent theft. Available in either black or white. Ezpassclip mounts with two suction cups to your windshield. Slide your toll tag up from the bottom and you're ready to go. Remove any velcro attached to your toll tag, dampen the suction cups if needed, and attach to a convenient location on your windshield. Your ezpassclip is ready to use.
BrandeZpassClip #ad
ManufacturerNuCorp17 Inc. #ad
Height1.4 Inches
Length5.6 Inches
Width2.6 Inches
Part NumberPart #813
ModelPart #813

5. eZpassClip

#ad

EZpassClip New EZ Pass Holder for New, Smaller EZ-Pass and Smaller I-Pass Toll Tag Transponders White

#ad
eZpassClip #ad - Available in either black or white. Ezpassclip makes it easy to use your electronic toll tag in multiple vehicles or simply remove it to prevent theft.

Your ezpassclip is ready to use. Remove any velcro attached to your toll tag, dampen the suction cups if needed, and attach to a convenient location on your windshield. Simply slide up your electronic toll tag and you're done! Ezpassclip is proudly made in the USA of high density, UV resilient plastic. Ezpassclip is your mounting solution for the new-style transponder. Ezpassclip mounts with two suction cups to your windshield. Slide your toll tag up from the bottom and you're ready to go.
BrandeZpassClip #ad
ManufacturerNuCorp17 Inc. #ad
Height1.4 Inches
Length5.6 Inches
Width2.6 Inches
Part NumberPart #814
Model13

6. NuBliss

#ad

EZ Pass Holder. Super Strong Holder with Suction Cups Holds Tightly to Your Car Windshield Black

#ad
NuBliss #ad - 100% money-back guarantee - - our ez pass holders are backed by 100% customer satisfaction Guarantee Policy. It also comes along with three suction cups that mount nicely to your windshield and will stay there unless it's physically removed. Manufactured for Neust Automotive accessories.

The suction cups are made of high-grade rubber and will stick to your windshield without any issues. Especially ideal to use for rental cars and easily removable to prevent theft. Fit - - the ez pass holder was made to fit the new size ez pass holders for the states of; new York, Illinois, Pennsylvania, New Jersey, Delaware, Massachusetts, New Hampshire, Rhode Island, Maryland, Virginia, Ohio, Maine, West Virginia and any other state with a similar size EZ Pass transponder. This policy was put in place to ensure that you are fully satisfied with our product or receive your money back no questions asked, so go ahead and try our EZ Pass holders now, RISK FREE!! Quality - - made out of premium abs plastic materials making it a long-life product to serve you for all your EZ Pass holder needs for years to come.

Package contents - - 1 clear ez Pass Holder and 3 suction cups. Design - - our ez pass holders were designed so that you can transfer your ez pass from vehicle to vehicle without leaving any Velcro residue everywhere.
BrandNuBliss #ad
ManufacturerNeust #ad
Height1.4 Inches
Length4 Inches
Weight0.01 Pounds
Width2.5 Inches
Part Number92219/92519
Model92219/92519

7. Free Thought Designs

#ad

Free Thought Designs Toll Transponder Holder for New I-Pass and EZ Pass 3 Point Mount 1 Pack

#ad
Free Thought Designs #ad - Fits new/smaller ez-pass and I-Pass 3. 5"x2" with or without adhesive strips. High temperature plasticm, can withstand high heat. 3 point suction Cup Mount. Does not rattle. You don't have to remove velcro from your unit.
BrandFree Thought Designs #ad
Part NumberTOLL10GEN1BK

8. USCAN

#ad

Clear, EZ Pass Toll Tag Holder,Fits New & Old Transponder,i-Pass,i-Zoom

#ad
USCAN #ad - E-z mount easily removes for cleaning the windshield, or when you are switching to another vehicle or when you just don't need it. Suitable for the following states: nj ny pa de il in oh va wv md ma ri nh sc fl and i-pass c-pass palmetto pass.

For use with both the new smaller kapsch Model 801660A-TAB and the original Mark IV transponder See back of unit Please check compatibility. The best way to attach your ez pass Toll Tag to the windshield of your Car, RV, Truck, or Motorcycle. Easy to put it on! easy to remove it! Slip the Tag into the E-Z Mount and stick it to the windshield with the suction cups. Its large suction cups securely hold the tag in place. Without using permanent adhesive strips. No adhesive necessary. Not for use with EZ Pass Flex, FasTrak.
BrandUSCAN #ad
ManufacturerUSCAN #ad
Height6.4 Inches
Length1.4 Inches
Weight0.1 Pounds
Width7 Inches
Part Number3013100605
Model8542107539

9. AutoBoxClub

#ad

EZ Pass Holder, IPass Holder/Toll Pass Holder for Most US States/Toll Pass Windshield Mount/Easy to Install and Remove/with 4pcs Toll Pass Mounting Strips/UV-Protective, AutoBoxClub PAW

#ad
AutoBoxClub #ad - Plus, south carolina, delaware, maine, i-pass, new jersey, they are 100% uv protective! fits all major toll pass holders - old and new ez pass, Fast Lane with HOV switch, Pennsylvania, Quick Pass, vermont, I-Zoom, Massachusetts, illinois, maryland, Elite Pass, ohio, FasTrak, PrePass Including: New York, Indiana and Virginia.

4pcs reclosable mounting Strips INCLUDED $8. 00 value. Great value - 4pcs reclosable Mounting strips are INCLUDED $6. 00 value. All new 2020 toll pass holder - our new 2020 holders are now stronger than before! The flexible base allows you to easily remove the holder from the windshield without breaking it. Attach in just seconds - with suction cups which even come with RELEASE TABS so it is super easy to remove.
BrandAutoBoxClub #ad
ManufacturerAUTOBOXCLUB #ad
Part NumberSH024

10. JL Safety

#ad

Tough & Made in USA, one Suction Cup, UNBREAKABLE Electronic Toll Pass Tag Holder. EZ Pass-Port, PalPass, IPass, QuickPass & FasTrak Transponders. Compact, for Old & New EZ Pass not HOV switch model

#ad
JL Safety #ad - Slip-fit that tightly and gently holds your old or new transponder not Flex in place. Made from steel to handle extreme temperatures. Industrial grade suction cup that holds through the hot and cold conditions. Will never melt, break, or deform. Easily install and remove your transponder when needed. Made in USA. Will not spin, discolor, rattle, deform, or bend. No adhesive needed.
BrandJL Safety #ad
ManufacturerJL Safety #ad
Height1.5 Inches
Length2 Inches
Weight0.04 Pounds
Width2.25 Inches
ModelEZP300