As an Amazon Associate I earn from qualifying purchases.
PPI #ad - 10 led super diodes for each light. Grommet fits standard mounting position. Meets all applicable DOT/SAE standards and fit standard trailer light mounting position.
Partsam #ad - This oval led tail light is compatible with almost all automobiles and devices equipped with a 8-16 volt dc power source such as Semi Truck, Service Truck, Horse Trailer, Parade Float, Pick Up Truck, international, Enclosed Trailer, Kenworth, freightliner, Boat Trailer, Service Van, Utility Truck, Bus, UTV Peterbilt, Semi Trailer, Utility Trailer, Utility Trailer, UTE, mack and lorries etc.
;. Warranty: we truly offer 1 year warranty for these led oval trailer tail lights! If have any questions or issues about our led tail lights, Please feel free to us and we will reply in 24 hours;. Easy to install: black wire is the ground, red wire is the high brightness for stop turn brake lights and White Wire is the low brightness for tail or running lights; Versatile flush mountable with the included rubber grommet allows the 6 inch oval led trailer light to be installed in both horizontal and vertical orientations.
Package includes 10 pieces 6 inch oval led Stop Turn Tail Lights Red, Rubber Grommets and 3-prong wire pigtails are included for complete installation;. You just need to surface mount the rubber grommets & oval tail light setup, and then connect the 3 wires pigtails to the corresponding wires on vehicles;.
ProlinePPPI #ad - Fit in a standard 2-1/2" x 6-3/4" oval hole. This sale includes 4pc of 6" red Oval Trailer Lights. Meets all applicable DOT/SAE standards and fit standard trailer light mounting position.
Nilight #ad - 6” x2. Fit type: Universal Fit. Awesome brightness: each tail light has 10 pcs high-quality SMD LEDs to output super bright red light, low brightness for Taillight, high brightness of Turn/Brake light, improving visibility and ensuring you a safer night.
Just make sure the hole size before you purchase. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. 5” x 1. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles.
Easy installation: the taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. Universal application: work on a 12 v dc system, special vehicle, trailers, tail light for all kinds of trucks, dump Truck, horse trailer, tractors, function as turn/Brake light, travel trailer, semi-trailer, etc. 75”". Upgraded unique design: nilight's tail light has unique “ears” on its two sides, and a tighter attaching ability between 3-prong plug and it.
Partsam #ad - 6. 3 inch oval red/white light serves as brake light, stop light, running light, tail light, Backup Light and Reverse Light: Outer Ring of LEDs comes with dual modeshigh low Beam and function as tail brake lights; Center Clear/White LEDs act as Backup and Reverse Light;.
Easy installation with high quality durable oval rubber grommet, hardwired with 4-wire connection system for Ground, reverse, Brake Light and Running Light: Black Wire - Ground / Red Wire - Brake Light / Yellow Wire - Reverse Light / White Wire - Running Light/Tail light.
Universal compatibility for vehicles equipped with dc12-24V Power Source supply, Camper, Trailers, Can be used in any Truck, UTVs, RV, UTEs, Trucks, Caravans etc. Outer diameter: 7. 4"; inner diameter: 6. 3"; drill hole: 6. 5"; led quantity: 23 led inner white 7 led + outer red 16 led; IP65 waterproof light fixture; Reccessed mount with grommet; The inner Miro-Flex faceted reflector design provides increased light output with a contemporary appearance.
Partsam #ad - Flush mount, unit is supplied with grommets, with reflector. Led quantity: high power 24 led, white wire is the Ground; Yellow Wire is the high brightness; Black Wire is the low brightness.
Kit includes: 2 6. 5 inches oval side amber led marker/turn/clearance light w/Reflector, 2 Black rubber grommet and 2 standard 3-prong pigtail for easy installation; 3 wire pigtails for Ground, Marker and Turn Signal Functions;.
Nilight #ad - These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Easy installation: the taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire.
Universal application: work on a 12 v dc system, horse trailer, dump truck, special vehicle, trailers, semi-trailer, tail light for all kinds of trucks, travel trailer, tractors, function as turn/Brake light, etc.
Hole size for surface mount is: 6. Shake proof, there will be no worries of loosing light or wires. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. 5” x 1. 75”. Awesome brightness: each tail light has 10 pcs high-quality SMD LEDs to output super bright red light, low brightness for Taillight, high brightness of Turn/Brake light, improving visibility and ensuring you a safer night.6” x2.
Partsam #ad - Super brightness: each tail light has 10pcs high-quality sMD LEDs to output super bright red light, high brightness for Turn/Brake light, low brightness for Tail light, improving visibility and ensuring you a safer night;. Hole size for surface mount is: 6. 6" x2. 5" x 1. 75";.
Compatible with almost all automobiles and devices equipped with a 8-16 volt dc power source such as semi truck, Enclosed Trailer, Horse Trailer, Utility Truck, Parade Float, Kenworth, Bus, freightliner, Service Van, Service Truck, UTV Peterbilt, UTE, Semi Trailer, international, Utility Trailer, Utility Trailer, Pick Up Truck, mack and lorries etc.
Easy installation: the taillight comes with grommets for surface mount, you just need to surface mount the grommets & light setup, also added a 3-prong watertight plug with attached wire. 10 red led diodes in red lens; work on 12v dc, flash light, can modify for signal light, 3 wires with 2 steps brightness, Emergency Light Flasher relay or Controler not included ; Wiring Tips: Black Wire - Ground; Red Wire - high brightness; White Wire - low brightness;.
Partsam #ad - Compatible with almost all automobiles and devices equipped with a 8-16 volt dc power source such as semi truck, Boat Trailer, Pick Up Truck, utE, Enclosed Trailer, freightliner, Service Van, UTV Peterbilt, Utility Trailer, Parade Float, international, Service Truck, Horse Trailer, Bus, Utility Trailer, Kenworth, Semi Trailer, Utility Truck, mack and lorries etc.
These 6 inch oval led tail lights are dot approved and are submersible, making it suitable to be used on trailers transporting boats, jet skis, or in various other applications where the lights are expected to be exposed to water.1
These lights will extend into the mounting surface and require that a hole be cut into your trailer. 7 2/5" l x 3" w waterproof smoke black lens oval red led trailer tail light serves 3 functions: turn signal lights, stop brake lights, or just tail lights; Flush mount with grommet and 3 prong wire pigtails;. Recessed-mount light: recessed-mount trailer lights install underneath a housing or a grommet.
Partsam #ad - These 6 inch oval led tail lights are dot approved and are waterproof, making it suitable to be used on trailers or in various other applications where the lights are expected to be exposed to water. 7 2/5" l x 3" w waterproof clear lens oval red led trailer tail light serves 3 functions: turn signal lights, stop brake lights, or just tail lights; Flush mount with grommet and 3 prong wire pigtails;.
Compatible with almost all automobiles and devices equipped with a 8-16 volt dc power source such as semi Truck, UTE, Parade Float, Semi Trailer, Utility Trailer, Utility Truck, Bus, Enclosed Trailer, Horse Trailer, Service Van, Utility Trailer, horse Trailer, Service Truck, Pick Up Truck, UTV and lorries etc.1
Recessed-mount light: recessed-mount trailer lights install underneath a housing or a grommet. These lights will extend into the mounting surface and require that a hole be cut into your trailer.
1. PPI
#ad2 Red Trailer Truck LED Sealed RED 6" Oval Stop/Turn/Tail Light Marine Waterproof Including 3-pin Water Tight Plug DOT SAE with Wires and Grommet
#adMore information #ad
This sale includes 2pc of 6" red Oval Trailer Lights. Fit in a standard 2-1/2" x 6-3/4" oval hole. The light is 2-5/16" x 6-7/16" oval, 1" thick 1-3/4" thick at wiring connection. Waterproof submarine Includes 3-pin water tight plug with wires.| Brand | PPI #ad |
| Manufacturer | proline #ad |
| Height | 1 Inches |
| Length | 4 Inches |
| Width | 2 Inches |
| Part Number | CECOMINOD076167 |
| Model | CECOMINOD076167 |
More information #ad
2. Partsam
#adPartsam 10Pcs 6" Inch Oval Led Trailer Tail Lights Red 10 Diodes Grommet and Plug Waterproof Turn Stop Tail Brake Trailer Lights Replacement for RV Trucks
#ad;. Warranty: we truly offer 1 year warranty for these led oval trailer tail lights! If have any questions or issues about our led tail lights, Please feel free to us and we will reply in 24 hours;. Easy to install: black wire is the ground, red wire is the high brightness for stop turn brake lights and White Wire is the low brightness for tail or running lights; Versatile flush mountable with the included rubber grommet allows the 6 inch oval led trailer light to be installed in both horizontal and vertical orientations.
More information #ad
Each oval tail light has 10pcs high-quality smd leds to output super bright red light, a hole about 6 1/3" need to drill to install it; Ready For The Weather: Be highly silicon sealed, IP65 waterproof rating, improving visibility and ensuring you a safer night; Dimensions: 7 1/3" x 3-1/8" x1 1/8"with grommets and 6 1/3" x 2"x 1"without grommets, always be ready for different kinds of weather attack;. Package includes 10 pieces 6 inch oval led Stop Turn Tail Lights Red, Rubber Grommets and 3-prong wire pigtails are included for complete installation;. You just need to surface mount the rubber grommets & oval tail light setup, and then connect the 3 wires pigtails to the corresponding wires on vehicles;.
| Brand | Partsam #ad |
| Manufacturer | Partsam #ad |
| Part Number | GTCV-0024969638 |
More information #ad
3. ProlinePPPI
#ad4 Trailer Truck LED Sealed RED 6" Oval Stop/Turn/Tail Light Marine Waterproof Including 3-pin Water Tight Plug DOT/SAE with Wires and Grommet
#adMore information #ad
The light is 2-5/16" x 6-7/16" oval, 1" thick 1-3/4" thick at wiring connection. 10 led super diodes for each light. Grommet fits standard mounting position. Waterproof submarine Includes 3-pin water tight plug with wires.| Brand | ProlinePPPI #ad |
| Manufacturer | prolinepri #ad |
| Part Number | MGB |
| Model | MGB |
More information #ad
4. Nilight
#adTL-07 6 Inch Oval Red Led Trailer Tail Lights 4PCS 10 Led with Flush Mount Grommets Plugs IP67 Waterproof Stop Brake Turn Trailer Lights for RV Truck, Nilight
#adJust make sure the hole size before you purchase. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. 5” x 1. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles.
More information #ad
Hole size for surface mount is: 6. These help the light fit perfectly and firmly on the grommet, upgrade notches on the inside of grommet, and the 3-prong plug attaches tightly on the light. Easy installation: the taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. Universal application: work on a 12 v dc system, special vehicle, trailers, tail light for all kinds of trucks, dump Truck, horse trailer, tractors, function as turn/Brake light, travel trailer, semi-trailer, etc. 75”". Upgraded unique design: nilight's tail light has unique “ears” on its two sides, and a tighter attaching ability between 3-prong plug and it.
| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Weight | 1.74 Pounds |
| Part Number | TL-07 |
| Model | TL-07 |
| Warranty | 2 Years Warranty |
More information #ad
5. Partsam
#adPartsam 2Pcs 6.3" inch Oval Truck Trailer Led Tail Stop Brake Lights Taillights Running Red and White Backup Reverse Lights, Sealed 6.3 inch Oval led Trailer Tail Lights w reflectors Flush Mount
#adEasy installation with high quality durable oval rubber grommet, hardwired with 4-wire connection system for Ground, reverse, Brake Light and Running Light: Black Wire - Ground / Red Wire - Brake Light / Yellow Wire - Reverse Light / White Wire - Running Light/Tail light.
More information #ad
Bright lights with durable feature, great for replacing your old LED tail lights or side; Each individual diode has a round pearl-shaped reflector giving the light a clean, custom look and superior light distribution. Universal compatibility for vehicles equipped with dc12-24V Power Source supply, Camper, Trailers, Can be used in any Truck, UTVs, RV, UTEs, Trucks, Caravans etc. Outer diameter: 7. 4"; inner diameter: 6. 3"; drill hole: 6. 5"; led quantity: 23 led inner white 7 led + outer red 16 led; IP65 waterproof light fixture; Reccessed mount with grommet; The inner Miro-Flex faceted reflector design provides increased light output with a contemporary appearance.
| Brand | Partsam #ad |
| Manufacturer | Partsam #ad |
| Part Number | GTCV-0606105704 |
More information #ad
6. Partsam
#adPartsam 2Pcs 6.5" Mid Turn Signal Amber Marker Light Rubber Mount 24 LED w/Reflex Lens Universal Waterproof 6 Inch Oval Led Mid-Ship Marker and Turn Signal Semi Truck Trailer Light
#adKit includes: 2 6. 5 inches oval side amber led marker/turn/clearance light w/Reflector, 2 Black rubber grommet and 2 standard 3-prong pigtail for easy installation; 3 wire pigtails for Ground, Marker and Turn Signal Functions;.
More information #ad
These bulb's draw less current, generate less heat and are brighter and light faster than an incandescent bulb. Fit for all kinds of trucks, offroad vehicle, atvs, semi-trailers, special vehicle, bus, semi-trailer, trailers, tractors, Dump Truck, etc. These lights are impact resistant and less susceptible to shock damage. Each light is water-tight sealed.| Brand | Partsam #ad |
| Manufacturer | Partsam #ad |
| Part Number | GTCV-0489750842 |
More information #ad
7. Nilight
#adNilight, TL-01 6" Oval Red LED Tail 2PCS w/Surface Mount Grommets Plugs IP65 Waterproof Stop Brake Turn Trailer Lights for RV Truck Jeep, 2 Years Warranty
#adUniversal application: work on a 12 v dc system, horse trailer, dump truck, special vehicle, trailers, semi-trailer, tail light for all kinds of trucks, travel trailer, tractors, function as turn/Brake light, etc.
More information #ad
Just make sure the hole size before you purchase. Upgraded unique design: niligh's tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. Hole size for surface mount is: 6. Shake proof, there will be no worries of loosing light or wires. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. 5” x 1. 75”. Awesome brightness: each tail light has 10 pcs high-quality SMD LEDs to output super bright red light, low brightness for Taillight, high brightness of Turn/Brake light, improving visibility and ensuring you a safer night.6” x2.
| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Part Number | TL-01 |
| Model | TL-01 |
| Warranty | 2 Years Warranty |
More information #ad
8. Partsam
#adPartsam 4pcs Trailer Truck LED Sealed RED 6" Oval Stop/Turn/Tail Lights Flush Mount Waterproof Including 3-pin Water Tight Plug with Wires and Grommets Sealed
#adCompatible with almost all automobiles and devices equipped with a 8-16 volt dc power source such as semi truck, Enclosed Trailer, Horse Trailer, Utility Truck, Parade Float, Kenworth, Bus, freightliner, Service Van, Service Truck, UTV Peterbilt, UTE, Semi Trailer, international, Utility Trailer, Utility Trailer, Pick Up Truck, mack and lorries etc.
More information #ad
;. For installation, and then connect the 3 wires to the corresponding wires on vehicles. 7 1/4" l x 3 1/10" w waterproof oval red led trailer tail light serves 3 functions: turn signal lights, stop brake lights, or just tail lights; Flush mount with grommet and 3 prong wire pigtails;. Easy installation: the taillight comes with grommets for surface mount, you just need to surface mount the grommets & light setup, also added a 3-prong watertight plug with attached wire. 10 red led diodes in red lens; work on 12v dc, flash light, can modify for signal light, 3 wires with 2 steps brightness, Emergency Light Flasher relay or Controler not included ; Wiring Tips: Black Wire - Ground; Red Wire - high brightness; White Wire - low brightness;.
| Brand | Partsam #ad |
| Manufacturer | Partsam #ad |
| Part Number | GTCV-0462940331 |
More information #ad
9. Partsam
#adPartsam 2Pcs 6 Inch Oval Red Led Trailer Tail Lights 10 Diodes Smoke Lens Stop Brake Turn Lights Grommet and Pigtails Submersible 12V Sealed for RV Trucks, 6 Oval led Tail Lights Smoked
#adThese 6 inch oval led tail lights are dot approved and are submersible, making it suitable to be used on trailers transporting boats, jet skis, or in various other applications where the lights are expected to be exposed to water.1
More information #ad
10 red led diodes in smoke black lens; work on 12v dc, flash light, can modify for signal light, 3 wires with 2 steps brightness, Emergency Light Flasher relay or Controler not included ; Surface mount with built-in flange and easy to install: Black Wire - Ground; Red Wire - high brightness; White Wire - low brightness. These lights will extend into the mounting surface and require that a hole be cut into your trailer. 7 2/5" l x 3" w waterproof smoke black lens oval red led trailer tail light serves 3 functions: turn signal lights, stop brake lights, or just tail lights; Flush mount with grommet and 3 prong wire pigtails;. Recessed-mount light: recessed-mount trailer lights install underneath a housing or a grommet.
| Brand | Partsam #ad |
| Manufacturer | Partsam #ad |
| Part Number | GTCV-0913042818 |
More information #ad
10. Partsam
#adPartsam 2Pcs 6 Inch Oval Red Led Trailer Tail Lights 10 Diodes Clear Lens Stop Brake Turn Lights Grommet and Pigtails Waterproof 12V Sealed for RV Trucks, 6 Oval led Tail Lights Clear
#adCompatible with almost all automobiles and devices equipped with a 8-16 volt dc power source such as semi Truck, UTE, Parade Float, Semi Trailer, Utility Trailer, Utility Truck, Bus, Enclosed Trailer, Horse Trailer, Service Van, Utility Trailer, horse Trailer, Service Truck, Pick Up Truck, UTV and lorries etc.1
More information #ad
10 red led diodes in clear lens; work on 12v dc, flash light, can modify for signal light, 3 wires with 2 steps brightness, Emergency Light Flasher relay or Controler not included ; Surface mount with built-in flange and easy to install: Black Wire - Ground; Red Wire - high brightness; White Wire - low brightness. Recessed-mount light: recessed-mount trailer lights install underneath a housing or a grommet. These lights will extend into the mounting surface and require that a hole be cut into your trailer.
| Brand | Partsam #ad |
| Manufacturer | Partsam #ad |
| Part Number | GTCV-0556613765 |
More information #ad
