As an Amazon Associate I earn from qualifying purchases.
1. EVIL ENERGY #ad
EVIL ENERGY 5/16 Fuel Hose Line NBR Rubber 30R7 10FT #adEVIL ENERGY #ad
- Burst pressure: 1160psi. Id: 5/16inch 8mm, od: 9/16inch（14mm. Material: NBR. Minimum Bend Radius: 3. 14inch80mm. Evil energy provide 10ft 5/16inch fuel hose 3-month warranty.
Any problem you might have, please feel free to contact us via Amazon message. Application: sae 30r7 rubber fuel line widely used in fuel system, PCV system, steam emission, oil cooling, please check the pressure of application before perchase.
Working pressure: 290psi. Applicable medium: 5/16 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air, etc. Temperature range: -40°F to 257°F.
2. EVIL ENERGY #ad
EVIL ENERGY 6AN PTFE E85 Fuel Line Hose Nylon Braided 10FT Black5/16 Inch ID #adEVIL ENERGY #ad
- Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Id: 5/16". Max working Pressure: 3000 psi. Od: 0465inch. Length: 10 feet. Please measure before purchase! ptfe fuel line can be used as fuel injection hose, vapor return line, boost line, fuel return line, fuel supply line, carb fuel line, ls engine swap fuel line, etc.
Applicable medium: all automotive fuels, lubricants, and coolants. Bursting pressure: 10000psi. Professional installation is highly recommended. Ptfe hose relatively hard, it can't be bend and folding in half.
3. NEW DAFU #ad
NEW DAFU 5/16 Inch 8mm ID NBR Nylon Braided Fuel Line Set,5 Ft＋6 Pcs 1/2 Inch ID Hose Clamps,For Motorcycle Kawasaki Kohler Briggs Stratton Small Engines,Boat Marine Outboard Gas Diesel Petrol #adNEW DAFU #ad
- For use in motorcycle mowers tractors snow blowers dirt bikes and all small engines, Use hose and clamps, transfer of petroleum products fuel lines for small engines. The service life can be up to 9 years, no matter what questions you have, 3 times more than the other ordinary fuel lines, Don't worry about your vehicle, And keep good working condition, so the fuel line will not leak under any circumstances, We will always support you.
The package includes:1×5 feet1. 5m 5/16" 8mm id fuel line, 6 × 1/2" id 65 manganese steel spring hose clamps, The dimensions of the two parts are compatible with each other, You can use them directly without additional purchases.
Wall thickness is 3mm:contains 3 layers of material:1. The outer layer is chloroprene rubber with good elasticity;2. The middle layer is Nylon Braided, and resist various corrosive liquids. The thickened tube makes you feel at ease, acid and alkali resistance, Which increases the working pressure 300PSI / 2MPa and the maximum burst pressure 1200psi / 8MPa;3.
The inner layer is nBR, which can increase oil resistance, No worries about leakage. Our fuel line's main material is: nbr copolymer of butadiene and acrylonitrile, it will not crack and its performance ↑ 50%. No matter in extremely cold areas or high temperature desert, Which makes our fuel line more resistant to high/low temperature - 30 °C~120 °C and aging compared with other common fuel lines, It will always accompany your vehicle to arrive the destination safely.
|Brand||NEW DAFU #ad|
|Manufacturer||NEW DAFU #ad|
|Model||NEW DAFU Fuel/Gas Line 8mm|
4. Partschoice #ad
6AN 16Ft Black Fuel Line Hose Braided Stainless Steel Fuel kit with 10pcs Swivel Fitting Hose Ends 2pcs Hose Separator Clamp #adPartschoice #ad
- Regulations. Application: universal, ethanol, lube, Such as fuel, coolant and air for automobiles or marine engines, alcohol, most suitable for racing cars & motor racing bikes.
Fuel hose: sizeid: an 6, length: 5m/16ft, pressure tolerance: 1500 psi, working temperature: -40 °f to +350 °F, Material: T7 Aluminum Alloy & Nylon, Color: Black. Not legal in the state of california & New York, Not complies with C.
A. R. B. Package includes: 1 x nylon braided hose, 2 x 45 degree swivel hose ends, 2 x 180 degree Swivel Hose Ends, 4 x straight swivel hose ends, 2 x 90 Degree Swivel Hose Ends, 2 x Hose Separators Clamp. Fuel hose end: sizeid: an 6, material: T7 Aluminum Alloy, Color: Red & Black.
5. Spectre #ad
Spectre Performance 29306 5/16" x 6' Stainless Steel Flex Fuel Line #adSpectre #ad
- Jacketed with hypalon for durability. High-quality nitrile rubber hose. 5/16 inch by 6 foot long hose. Inner ply of braided cord. 304 grade stainless steel braid.
6. Spectre Performance #ad
Spectre Performance 2168 Magnaclamp 5/16" Fuel Line Fitting #adSpectre Performance #ad
- Package height : 1. 016 cm. Package width : 9. 652 cm. Package length : 14. 478 cm. Product type : AUTO PART.
|Brand||Spectre Performance #ad|
7. Vincos #ad
15 Ft 6AN ID 10AN OD Universal Braided Stainless Steel CPE Oil Fuel Gas Line Hose Fit #adVincos #ad
- Application for racing fuel, fuels with Ethanol, alcohol Based Fuels, Pump Gas, Motor Oil & Coolant etc. Length:15 ft, universal accessory, inner diameter: 8. 7mm 0343", outside Diameter: 13. 89mm 0547", easy to Operate.
Braided fuel hose with special hand feel. Premium synthetic hose, good quality and durability, nylon and stainless steel wires, working Temperature: -40F to 248F -40°C to + 120°C under most operating conditions; Working Pressure:1015 PSI - Burst Pressure: 6090 PSI. Perfect racing fittings for fuel injection use.
8. Vincos #ad
20 Ft 6AN AN6 5/16" Universal Braided Stainless Steel PTFE TEFLON Oil Fuel Gas Line Hose #adVincos #ad
- Application for racing fuel, alcohol Based Fuels, fuels with Ethanol, Pump Gas, Motor Oil & Coolant etc. Good quality and durability, working temperature: -60f to 500f -60°c to + 260°C under most operating conditions; Working Pressure:3000 PSI - Burst Pressure: 10000 PSI.
Braided fuel hose with special hand feel. Perfect racing fittings for fuel injection use. Length:20 ft, universal accessory, outside diameter: 1092 mm 043", inner Diameter: 8. 13 mm 032", easy to Operate.
9. EVIL ENERGY #ad
EVIL ENERGY 6AN PTFE Fuel Line Kit,AN6 E85 Stainless Steel Braided Hose 16FT5/16Inch ID #adEVIL ENERGY #ad
- Professional installation is highly recommended. 6 ptfe stainless steel braided fuel line relatively hard, it can't be bend and folding in half.
Bursting pressure: 10000psi. An6 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications. Evil energy provide 6an ptfe fuel hose fitting kit 3-month warranty. Id: 5/16". Please measure before purchase! Includes: as shown in the picture.
Applicable medium:6an e85 fuel line works with all automotive fuels, lubricants, and coolants. Any problem you might have, please feel free to contact us via Amazon message. Max working pressure: 3000 psi. Od: 043inch. Length: 16 feet. Working temperature range: -76℉ to 446℉ -60℃ to 230℃.
10. SHOYO #ad
Nylon Braided 5/16" Marine Outboard Boat Motor RVs Fuel Hose Line Assembly with Primer Bulb Steel Hose Clamps 6FTBraided-5/16“, Fuel Line Assembly #adSHOYO #ad
- Premium quality rubber bulb with nylon braided rubber line hose. Compatible with ethanol blended fuels, Suitable for Boats, Tractors, RVs, Engineered low permeation material prevents fuel evaporation, and Caravans.
Note: this is rubber product, please do not store this item under direct sunlight or other rough environment. One way valves allow priming in multiple orientations without restricting fuel flow. Stainless steel clamps. Universal fuel line - 5/16" 8mm Hose inside diameter with 6ft long line.