As an Amazon Associate I earn from qualifying purchases.
1. EVIL ENERGY #ad
EVIL ENERGY 6AN 90 Degree Swivel Hose End Fitting for braided fuel line Aluminum Alloy Black&Red #adEVIL ENERGY #ad
- Swivel fittings are easy to use and don't require special equipment. Environmental friendly- swivel hose end can be reused and recycle if you do not want them to stay in the original place. Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends.
Application- evil energy swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. They are not compatible with PTFE Hose, Rubber Hose. Due to the high-quality material which makes fitting worked last for long.
The hose end fittings are made of high-quality aluminum alloy material for strong strength. Connect oil gas line, Fuel hose, e85, Clutch hose, Turbo line etc. Our swivel fitting is work with Nylon Braided Hose and Stainless Steel Braided Fuel Hose.
Polished and anodized surface provides the bright appearance and corrosion protection. We normally recommend a bit of assembly lube to help prevent any galling. Multi sizes supplied:available in 4 sizes and four angles:4an, 45 degree, 90 degree, 10an/straight, 8an, 180 degree. Swivel hose end no installation instructions, 6an, detailed Installation steps look described in detail. These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.
2. Shineyoo #ad
Shineyoo 6AN Straight End Fitting 4 Pcs for Braided Fuel Oil Gas Line Hose End 6 AN Fittings Aluminum Black #adShineyoo #ad
- Service:if you have questions of our female AN6 swivel fittings, you can contact us. We value your shopping experience and strive to offer a high-quality product and service.
Package include:4X Straight Swivel Fuel Hose End. Industrial quality:the female an6 fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Connect oil gas line, braided fuel line, clutch hose, turbo line etc.
Wonderful for universal use:6an swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. They are not compatible with PTFE hose, rubber hose. Unique design:swivel design for easy assembly, The adjustable AN wrench is highly recommended. Black anodized for great appearance and anti-corrosion, superior thread strength. Our 6an fitting is work with nylon braided fuel hose.
3. EVIL ENERGY #ad
EVIL ENERGY 6AN Fuel Line Kit,AN6 Braided Nylon Fuel Hose CPE 10FT Black&Red #adEVIL ENERGY #ad
- Application 6an nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, and fuel, oil, race gas, etc. Size id of 6an fuel hose:034"8. 63mm, od:054"13. 71mm. Length:10ft. Warranty evil energy provide 6an fuel line hose fitting kit 3-month warranty.
Any problem you might have, please feel free to contact us via Amazon message. Material made of CPE synthetic rubber and nylon braided. Parameter working pressure:500psi, burst pressure:2000psi;Temperature range:-40°F to 257°F-40°C to 125°C;Min bending radius:63. 5mm.
4. EVIL ENERGY #ad
EVIL ENERGY Male 6AN to 5/16" Hardline Tube Fuel Fitting,5/16 Inch to AN6 Compression Adapter Aluminum #adEVIL ENERGY #ad
- Material made of aluminium alloy fitting and brass ferrule. Size the thread size of 6an is 9/16-18 unf, It's fits to 5/16" OD hardline, please measure before perchase. Application Only applicable to stainless steel or aluminum hardline.
Warranty evil energy provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message. Work parameter max working pressure: 4000PSI. Working temperature range: -65°F to 252°F.
5. Storystore #ad
4AN Fuel Line Kit, Stainless Steel Nylon Braided CPE Line 10FT Black #adStorystore #ad
- Length: 3m/10ft. Please check the working pressure and temperature of your system before purchase. Made of high-quality nylon-reinforced CPE chlorinated polyethylene synthetic rubber, securely, light weight and portable.
5. Od: 043 inch. 2. 1. Package includes: 1 x nylon braided hose, 2 x hose separator clamp, 2 x 45 Degree Swivel Hose Ends, 2 x straight swivel hose Ends, 2 x 90 Degree Swivel Hose Ends.
Bursting pressure: 2000psi. Wide application: braided fuel line kit widely used as fuel supply line, fuel return line, turbo cooler line, vacuum line, coolant fluid hose, fuel gauges line, oil feed line.
Maximum working pressure: 500psi. Fuel line hose kit can be compatible with fuel, diesel, transmission fluid, oil, hydraulic fluid and pump gas. Note - professional installation is highly recommended. Size & material: id: 02 inch. 3. Working temperature range: -40℉ to 257℉. 4.
6. EVIL ENERGY #ad
EVIL ENERGY AN Hose Fitting Adjustable Wrench Spanner Lightweight Aluminum 3AN-16AN Black #adEVIL ENERGY #ad
- Recommended for aluminum fitting, easy to damage for other materials. Material: it's made of lightweight 6061-t6 aluminum.
Size:length: 7. 2 inch/18. 5 cm, width: 2. 7 inch/7. 1 cm, thickness:052 inch/1. 35cm. Advantage:multisize in one /Contact of four opposite sides. Any problem you might have, please feel free to contact us via Amazon message.
Advice:wrap the wrench's jaws with electircal tape to better protect the fitting &wrench. Adjustable range:this wrench size can be adjusted to 3AN, 6AN, 4AN, 12AN, 10AN, 8AN, 14AN and 16AN. Evil energy provide this product have 3-month warranty.
7. EVIL ENERGY #ad
EVIL ENERGY AN6 Flare Cap Tube Fitting Hex Head Port Fitting Adapter 2PCS Aluminum #adEVIL ENERGY #ad
- Accessories can be used either temporarily or permanently. Female pipe plug nut fitting universal application for Diesel, Water, E85, Air Line. Evil energy provide this product have 3-month warranty.
We value your shopping experience and strive to offer a product and service. An flare caps will block off fuel hose line prevent dirt and debris from entering the external threaded hose fittings and adapters.
6an flare cap tube fitting maximum pressure of the fitting is 4000psi 275bar and the working temperature range is -65º F to 252º F, manufactured from high performance lightweight 6061-T6 cnc machined billet aluminum. The surface is black anodized for great appearance and anti-corrosion. Cap block off nuts are 100% reusable.
8. EVIL ENERGY #ad
EVIL ENERGY 6AN Hose Finisher Clamp Aluminium Black Pack of 4 #adEVIL ENERGY #ad
- Material: lightweight aluminum alloy 6061-T6 anodized finish hose end cover and 201 stainless steel worm gear clamp. Evil energy provide 6an hose finisher 3-month warranty. Applicable: widely used as nylon or stainless braided hoses, rubber hoses end finisher.
Size: adjustable range of 6AN finisher clamp is 10-15mm. Feature: compared with other clamps, it can provide a good look finish while also firmly fixing your project. Any problem you have, please contact us via Amazon message.
9. EVIL ENERGY #ad
EVIL ENERGY 6AN Swivel Hose End Fitting 90 Degree for Braided CPE Fuel Hose Blue&Red 2PCS #adEVIL ENERGY #ad
- Swivel design for easy assembly, the adjustable AN wrench is highly recommended. Please attention that 6an 90 degree fitting only be worked with Braided CPE fuel line. Evil energy provide different kinds of fuel fittings, Push-on lock, Swivel, PTFE hose end and other fitting adapters.
Package inclued: 2 pcs x 6AN 90 degree swivel hose ends. Thread size of 6an hose fitting is 9/16-18UNF and the braided CPE fuel line which works with should be 3/8". It can not be installed on PTFE Hose.
10. IPARTS EXPERT #ad
Black, 3/8 6AN 20FT Fuel Line Hose Kit, Nylon Stainless Steel Braided Fuel Line Oil/Gas/Fuel Hose End Fitting Hose with 10PCS Swivel Fuel Hose Fitting Adapter Kit #adIPARTS EXPERT #ad
- Package includes: 1 x 6an 20ft nylon braided hose, 2 x 45 degree swivel Hose Ends, 4 x straight swivel Hose Ends, 2 x 90 degree swivel hose ends, 2 x 180 Degree Swivel Hose Ends. Nylon braided cpe fuel line: best for oil gas line, fuel hose, transmission, nitro, oiling, turbo line.
Universal application: the fuel line hose fits different brands of different cars. Professional Installer is Highly Recommended. Recommended for alcohol, clutch, clutch hose, power steerig, hydraulic and vacouum applications.
Exchange or return for free if leak. Safety features for your protection: fuel hose: sizeid: 6an, length: 20ft, working Temperature: -100℉ to 500℉ -73°C to + 260°C, pressure tolerance: 500 pSI, the fuel line has good flame retardancy and excellent corrosion resistance.
Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes. Hose material: covered with high quality woven nylon and stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance; The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.