Top 10 12V Relay Module – Automotive Replacement Relay Control Module Relays

As an Amazon Associate I earn from qualifying purchases.



Delay Relay Module, DROK DC 6-30V Timer Relay 12V 24V 0.01s-9999min 50mA Digital Timer Cycle Delay Switch Module AC 220V Power On-Off Controller with LCD Display Switch Button Case

DROK #ad - Other features - clear lcd display; support uart data uploading and parameter setting; with pause button, support one-button pause; with automatically sleep mode; with input reverse connection protection; with power-off auto storage function.

Note - no trigger cable or connector included, need to be purchased separately. Trigger - support high level support, low level trigger, button trigger control, switching value control, available for most applications. Specification - working voltage DC 6-30V; timing range 001s-9999mins continuously adjustable. Independent parameter - able to set different OP, CL, LOP parameters which are independent and saved separately; support viewing currently set parameters without affecting system operation.
BrandDROK #ad
ManufacturerDROK #ad

2. iRhapsody


Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN SPDT Bosch Style Automotive Relay, 5 Pack 40/30 AMP 12 V DC Waterproof Relay and Harness

iRhapsody #ad - Excellent waterproof and dustproof ability, high quality in any weather conditions. 16 awg tinned copper wires for Pin 85, Pin 86. 12 awg tinned copper wires for pin 30, Pin 87, Pin 87a. Length: 5. 1in. 12v dc waterproof 5 wire relay max 14v. 40 amp / 30 amp High switching capability. Nominal coil voltage: 12 v dc; coil power: 1. 8 w; coil resistance: 80 Ω; must operate voltage: 6~8 V DC; Must Release Voltage: 06~3. 6 v dc; maximum applied Voltage: 15. 6 v dc. Length: 5. 1in.
BrandiRhapsody #ad
ManufacturerIRHAPSODY #ad
Height1.7 Inches
Length7.85 Inches
Weight1.1 Pounds
Width1.6 Inches
Part NumberIY-5PinRelay-5



Dorhea 6PCS NE555 DC 12V Delay Timer Relay Switch Module Adjustable 0-10 Seconds Constant Current Regulator Timer Delay Converter for Automotive Control System Electrical Equipment

DORHEA #ad - A wide range of applications: the adjustable timer switch relay module is designed with relay module continuous current flow protection. The timer delay is made of electronic accessories, inner conductor is pure copper.

12v module, the output can be connected to ac 250v 10a and DC 0-30V/max. 10a equipment, and the max control equipment is up to 2200W. Ne555 delay module, high frequency filter capacitor and with input power indicator, which consist of high-precision potentiometer adjust the output frequency. With the relay is energized light. It is long lasting and durable for you to use.

Useful for applications in equipment-delay to prevent sudden high current which can burn components and devices. The timer switch relay module can be adjustable timer delaydefault setting:0-10s and counter clockwise adjustment of potentiometer to increase delay time. This module is perfect for SCM learning, electronic competition, product development, graduation design and so on.
BrandDORHEA #ad
ManufacturerDORHEA #ad
Part Number13690-1



SMAKN DC 12V 2CH 2 Channel Isolated Optocoupler High/Low Level Trigger Relay Module

SMAKN #ad - Coil voltage : DC 12V;. Pole number : 2 Channel. Relay type : srd-12vdC-SL-C. Weight : 33g;package content : 1 x Optocoupler Driver Relay Module. Product name : Optocoupler Driver Relay Module;.
BrandSMAKN #ad
ManufacturerSMAKN #ad
Part Number5864305310



12 Volt Timer Relay, DROK 0.1s to 999min 50mA 4-Mode On-Off Automotive Digital Delay Relay, Cycle Time Delay Module with LED Display, Electric Delay Timer Switch

DROK #ad - Super simple operation: our relay board is operated by buttons and the delay module is equipped with LED digital display which is convenient for you to check the set value. Wide adjustable timing range: this off delay relay supports widest timing range, 01 seconds to 999 minutes adjustable, which can fulfilled your various need.

Automatic saving function: after you finish the setting, you can cut off the power and then the parameters will be saved automatically, handy and convenient. 4 mode time delay relay: drok 12v relay is provided with 4 different settings and supports various triggering signal source, Button, like positive side of power supply triggering, PLC signal, PNP sensor, which is available for most of applications.

Strong anti-interference ability: The output of digital timer relay adopts optocoupler isolation, which enhances the capacity of resisting disturbance power consumption.
BrandDROK #ad
ManufacturerDROK #ad
Part Number300473



Automotive Digital Timer Relay Board DC 12V 20A 1500W Relay Module with Dual Time Display, Timing Relay Switch ON-Off Control Support Cycle of time Time Delay for Car Vehicle DC 12V

UMLIFE #ad - This 12v time delay relay can store the setting automatically. Please wait 6 seconds after finishing setting the data. Can be used in timing, intermittent timing, raft fishing machine, slow-down machine DIY, delaying, cycle timing, etc.

The data set will be stored automatically after 6 seconds. Digital cycle timer delay module with time ranging from 1 second to 999 hours, available for various application. Notice: no out put voltage if you need the e-manual or meet any other questions, pls contact us and we will send it to you!!! The time relay delay dual display: red readout for practical valuePV; Blue readout for set valueSV;79mm*43mm-display panel; 71mm*40mm*24mm-cut out size. This relay switch is four-terminal wiring and setting by buttons, easy and simple for everyone to use it.
BrandUMLIFE #ad
ManufacturerUMLIFE #ad
Part Number1



Industrial Control, Arduino Robot, GPS, PLC Control, UCTRONICS DC 12V Time Delay Relay Module for Smart Home, Electronic Experiment, Tachograph

UCTRONICS #ad - Load current: 10A. Functions: supports on delay and off delay modes, the delay time can be adjusted from 01s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer.

Note: please remove the jumper cap of s5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly. Operating voltage: dc 12v; quiescent current: 5. 5ma; max. Search for asin b08tqty8mp to get the module with protective case. Self protection: built with protection against reversal diode, supports anti-reverse protection.

Load voltage: terminal nc is dc 30v or ac 250v, terminal NO is DC 28V or AC 125V; Max. Applications: this module works as a switch with time delay on and off function, and LED lights, DC motors, highly recommended for automotive circuit modification, pump and smart home control system. Operating current: 42ma; max.
ManufacturerUCTRONICS #ad
Part NumberU6031



10 Pack Bosch Style 5-Pin 12V Relay Switch SPDT 30/40 Amp 12 Volt Automotive Relays for Auto Fan Cars

ONLINE LED STORE #ad - 10pc Included. 40a/30a high switching Capability. User manual available for download under Product Information Details. Pin specifications: ground 85, vdc 30, Output N/C 87a, trigger 86, and Output N/O 87. Bosch style 5-pin spdt Single Pole Double Throw Relay.
ManufacturerONLINE LED STORE #ad
Height1.75 Inches
Length5.75 Inches
Width2.75 Inches
Part NumberPSZACCEPS176R



EHDIS Car Relay 4 Pin 12v 40amp Spst Model No.: JD2912-1H-12VDC 40A 14VDC, Auto Switches & Starters,Pack of 2

EHDIS #ad - Package include: 2 x 40a 4-Pin 12V Vehicle Relays. Mechanical life of 10, 000+ cycles. Brand new heavy duty 4-prongs SPST relays. High 40a coil capacity- able to handle those high current applications with ease. Use optional relay Harness, or female Crimp Connectors.
BrandEHDIS #ad
ManufacturerEhdis #ad
Height0.98 Inches
Length1.06 Inches
Weight0.09 Pounds
Width1.06 Inches
Part Number2C05-12V

10. iRhapsody


IRHAPSODY 12V DC 120Amp 4 Pin Heavy Duty Relay, Split Charge Relay Switch, Continuous Duty SPST 4 Terminal Relay

iRhapsody #ad - It is more reliable than 2. 4w 60 ohms and 4. 8w 30 ohms relays on the market. Large capacity: 120a high current carrying capacity, heavy duty make/break relay. Advantage - coil power: 1. 8 w; coil resistance: 80 ohms. The size of the round stud terminals: M6 / 6mm. Nominal coil voltage: 12v, pickup voltage: 8V, Dropout voltage: 1. 2v, maximum applied voltage: 14V. Ideal for split charging or any vehicle needing a high power relay.
BrandiRhapsody #ad
ManufacturerIRHAPSODY #ad
Height2.95 Inches
Length1.77 Inches
Width1.77 Inches
Part NumberAutoRelay-12V120A1P
Warranty1 YEAR