Adafruit Ultimate GPS Breakout – Version 3 with External Antenna and uFL to SMA Cable Kit – 66 channel w/10 Hz updates

#ad
Adafruit 746-1100 #ad - 165 dbm sensitivity, 10 Hz updates, 66 channels. Antenna: 3-5v 28dB 5 Meter cable. It can do up to 10 location updates a second for high speed, high sensitivity logging or tracking. 5v friendly design and only 20mA current draw. Kit includes gps receiver, External Antenna and uFL to SMA Cable! If you want to have an led on all the time, we also provide the FIX signal out on a pin so you can put an external LED on.

Power usage is incredibly low, only 20 mA during navigation. The led blinks at about 1hz while it's searching for satellites and blinks once every 15 seconds when a fix is found to conserve power. Comes with one fully assembled and tested module, a piece of header you can solder to it for breadboarding, and a CR1220 coin cell holder.

Adafruit Ultimate GPS Breakout - Version 3 with External Antenna and uFL to SMA Cable Kit - 66 channel w/10 Hz updates #ad - Many tutorials available at Adafruit's website. Battery not included. Ufl to sma cable: this cable is rg178 and is 15cm 5. 9" long not including the RP-SMA connector. This is the ultimate gps module for your raspberry pi, has an excellent high-sensitivity receiver -165 dB tracking!, high-quality GPS module that can track up to 22 satellites on 66 channels, a no-nonsense, Arduino or other microcontroller project! The breakout is built around the MTK3339 chipset, and a built in antenna.

Two features that really stand out about version 3 MTK3339-based module is the external antenna functionality and the the built in data-logging capability.

#ad



ADAFRUIT Industries 954 USB-to-TTL Serial Cable, Raspberry PI 1 Piece

#ad
Adafruit 954 #ad - This cable is an easy way to connect a Raspberry Pi, a microcontroller, BeagleBone Black, or other TTL serial device to your computer. This can even be used to install alternate operating systems on some WiFi routers. Pinout: red 5v, black 0v ground, White RX, Green TX. Usb to ttl serial Cable. This makes the cable ideal for interfacing with debugging and programming consoles of various devices.

Ideal for easy debugging of Raspberry Pi and BeagleBone Black. Silabs cp2012 chipset. This devices uses the pl2303ta chipset and is compatible with Windows 8! There are also drivers available for Windows XP/Vista/7/8 and MacOS X 106 to 1010 Compatible with windows xp/vista/7/8 and MacOS X 106 to 1010 .

#ad



Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055

#ad
Adafruit 2472 #ad - Absolute orientation, angular velocity, acceleration, magnetic field strength, gravity, linear acceleration, temperature. Easy to use Adafruit tutorials. Silabs cp2012 chipset. Easy soldering of header pins required. The sensor fusion algorithms the secret sauce that blends accelerometer, magnetometer and gyroscope data into stable three-axis orientation output can be mind-numbingly difficult to get right and implement on low cost real time systems.

Bosch is the first company to get this right by taking a mems accelerometer, abstract the sensor fusion and real time requirements away, and spit out data you can use in quaternions, magnetometer and gyroscope and putting them on a single die with a high speed ARM Cortex-M0 based processor to digest all the sensor data, Euler angles or vectors.

Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055 #ad - The bno055 can output the following sensor data: absolute orientation euler vector, 100hz three axis orientation data based on a 360° sphereabsolute orientation quaterion, 100hz four point quaternion output for more accurate data manipulationAngular Velocity Vector 100Hz Three axis of 'rotation speed' in rad/sAcceleration Vector 100Hz Three axis of acceleration gravity + linear motion in m/s^2Magnetic Field Strength Vector 20Hz Three axis of magnetic field sensing in micro Tesla uTLinear Acceleration Vector 100Hz Three axis of linear acceleration data acceleration minus gravity in m/s^2Gravity Vector 100Hz Three axis of gravitational acceleration minus any movement in m/s^2Temperature 1Hz Ambient temperature in degrees celsius Compatible with windows xp/vista/7/8 and MacOS X 10

6 to 1010 Data output over I2C. Pinout: red 5v, white rX, black 0v ground, Green TX.

#ad



Raspberry Pi 7" Touch Screen Display

#ad
Raspberry Pi 7TOUCH #ad - Note: the display works with all existing Raspberry Pi models, however the mounting holes only Line up with the newer board design of the a+, b+ and Pi 2. Ideal for easy debugging of Raspberry Pi and BeagleBone Black. Absolute orientation, magnetic field strength, linear acceleration, acceleration, angular velocity, gravity, temperature.

Easy to use Adafruit tutorials. Kit contents: 7” touchscreen display adapter board dsi ribbon cable 4 x stand-offs and screws 4 x jumper wires technical Specifications 7” Touchscreen display. The adapter board handles power, Signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires.

Raspberry Pi 7" Touch Screen Display #ad - Usb to ttl serial Cable. Adapter board is used to power the display and convert the parallel signals from the display to the serial dsi port on the Raspberry Pi. Silabs cp2012 chipset. Easy soldering of header pins required. Screen dimensions: 194mm x 110mm x 20mm including standoffs viewable screen size: 155mm x 86mm Screen resolution 800 x 480 pixels 10 finger capacitive touch Connects to the Raspberry Pi board Using a ribbon cable connected to the dsi port.

. Compatible with windows xp/vista/7/8 and MacOS X 10

#ad



JBtek Windows 8 Supported Debug Cable for Raspberry Pi USB Programming USB to TTL Serial Cable

#ad
JBtek EL-PN-47310126 #ad - Pinout: red 5v, black 0v ground, White RX, Green TX. Meaningful sensor data in minutes with Bosch's smart BNO055 smart 9-ODF sensor. Silabs cp2012 chipset. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way.

The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. This cable can be used for powering and connecting up to the debug/login console on the Raspberry Pi; router / ADSL update; GPS serial communication.

JBtek Windows 8 Supported Debug Cable for Raspberry Pi USB Programming USB to TTL Serial Cable #ad - Windows xp/vista/7 & windows 8 supported, macos x; pl2303 TA. Easy soldering of header pins required. Usb to ttl serial Cable. The adapter board handles power, Signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires.

Drivers on your computer and connect with a terminal program at 115200 baud. Red cable: +5v black cable: gnd green cable: txd white cable: RXD Compatible with windows xp/vista/7/8 and MacOS X 10

#ad



U.FL Mini PCI to Reverse Polarity SMA Pigtail Antenna WiFi Cable Pack of 2

#ad
OneLinkMore OL0559-X #ad - Help you connect reverse polarity SMA Male Hole in center, thread inside and IPX male connectors. 17cm long for extension u. Fl to reverse polarity SMA antenna Adapter Cable. Package content : 2 x reverse Polarity SMA to IPX Cable. Pinout: red 5v, white rX, black 0v ground, Green TX. Meaningful sensor data in minutes with Bosch's smart BNO055 smart 9-ODF sensor.

Silabs cp2012 chipset. Usb to ttl serial Cable. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers.

U.FL Mini PCI to Reverse Polarity SMA Pigtail Antenna WiFi Cable Pack of 2 #ad - Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. The power pin provides 500ma directly from the USB port and the RX/TX pins are 3. 3v level for interfacing with the most common 3. 3v logic level chipsets. Easy soldering of header pins required. Drivers on your computer and connect with a terminal program at 115200 baud.

Connect to your micro controller, Raspberry Pi, WiFi router with ease.

#ad



RS Raspberry Pi 7-Inch LCD Touch Screen Case, Black

#ad
Raspberry Pi FBA_102035 #ad - Case compatible only with the official Raspberry Pi 7" Lcd touch screen. The power pin provides 500ma directly from the USB port and the RX/TX pins are 3. 3v level for interfacing with the most common 3. 3v logic level chipsets. The case also acts as a bezel to the display, improving its appearance while housing The board neatly behind it.

Compatible with windows xp/vista/7/8 and MacOS X 106 to 1010 Note: raspberry pi board and Raspberry Pi LCD touch screen are sold separately. The adapter board handles power, Signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires.

RS Raspberry Pi 7-Inch LCD Touch Screen Case, Black #ad - Ideal for easy debugging of Raspberry Pi and BeagleBone Black. Easy soldering of header pins required. This case is designed to house your Raspberry Pi board and the official Raspberry Pi 7" Lcd touch screen providing protection to the board and the display. Silabs cp2012 chipset. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way.

The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers.

#ad



66 channel w/10 Hz updates ADA746 - Adafruit Ultimate GPS Breakout

#ad
Adafruit - #ad - This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port.

Two features that really stand out about version 3 MTK3339-based module is the external antenna functionality and the the built in data-logging capability. The adapter board handles power, Signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires.

66 channel w/10 Hz updates ADA746 - Adafruit Ultimate GPS Breakout #ad - Includes an ultra-low dropout 3. 3v regulator so you can power it with 3. 3-5vdc in, 5v level safe inputs, enable pin so you can turn off the module using any microcontroller pin or switch, a footprint for optional CR1220 coin cell to keep the RTC running and allow warm starts and a tiny bright red LED. Silabs cp2012 chipset.

This case is designed to house your Raspberry Pi board and the official Raspberry Pi 7" Lcd touch screen providing protection to the board and the display. 165 dbm sensitivity, 10 Hz updates, 66 channels. Windows xp/vista/7 & windows 8 supported, macos x; pl2303 TA.

#ad



SmartiPi Touch 2 - with Cooling Fan - Case for The Official Raspberry Pi 7" Touchscreen Display

#ad
Smarticase #ad - 17cm long for extension u. Fl to reverse polarity SMA antenna Adapter Cable. This case is designed to house your Raspberry Pi board and the official Raspberry Pi 7" Lcd touch screen providing protection to the board and the display. 165 dbm sensitivity, 10 Hz updates, 66 channels. The smartipi touch 2 is a case for the official raspberry Pi display and Raspberry Pi B+, 3B+, 3A+, 2B, 3B, and 4.

Compatible with windows xp/vista/7/8 and MacOS X 106 to 1010 Also included is a usb-c splitter cable that will power a Raspberry Pi 4 and the display at the same time. Three faceplate options included. Usb to ttl serial Cable. Absolute orientation, acceleration, magnetic field strength, linear acceleration, angular velocity, gravity, temperature.

SmartiPi Touch 2 - with Cooling Fan - Case for The Official Raspberry Pi 7" Touchscreen Display #ad - Easy to use Adafruit tutorials. Requires a 5v 3a usb-c power supply if using a Raspberry Pi4. Data output over I2C. All ports, including the HDMI port are accessible. Included are two flat white cables to connect the Raspberry Pi 7" display and Raspbery Pi camera to the Raspberry Pi board. Perfect for Raspberry Pi, Arduino and more!

#ad



Raspberry Pi Camera Module V2-8 Megapixel,1080p

#ad
Raspberry Pi RPI-CAM-V2 #ad - Internal patch antenna + u. Fl connector for external active antenna. Maximum of 1080p30 and 8MP Stills in Raspberry Pi Board. 2a power supply Highly Recommended. The adapter board handles power, Signal conversion, and touch input conversion. Kit contents: 7" touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires.

Pinout: red 5v, white rX, black 0v ground, Green TX. Meaningful sensor data in minutes with Bosch's smart BNO055 smart 9-ODF sensor. Compatible with windows xp/vista/7/8 and MacOS X 106 to 1010 Front panel mount for Raspberry Pi official camera. Works with official 7" pi display and raspberry Pi B+, 3B, 2B, 3B+, 3A+, and 4.

Raspberry Pi Camera Module V2-8 Megapixel,1080p #ad - Works with Raspberry Pi HAT boards. 17cm long for extension u. Fl to reverse polarity SMA antenna Adapter Cable. This case is designed to house your Raspberry Pi board and the official Raspberry Pi 7" Lcd touch screen providing protection to the board and the display. 165 dbm sensitivity, 10 Hz updates, 66 channels.

Absolute orientation, linear acceleration, magnetic field strength, gravity, acceleration, angular velocity, temperature.

#ad



ARDUINO UNO R3 A000066

#ad
ARDUINO A000066 #ad - Pinout: red 5v, white rX, black 0v ground, Green TX. Meaningful sensor data in minutes with Bosch's smart BNO055 smart 9-ODF sensor. Three faceplate options included. 17cm long for extension u. Fl to reverse polarity SMA antenna Adapter Cable. 5v friendly design and only 20mA current draw. Absolute orientation, angular velocity, gravity, acceleration, magnetic field strength, linear acceleration, temperature.

Easy to use Adafruit tutorials. Second generation Raspberry Pi Camera Module with Fixed Focus Lens. Internal patch antenna + u. Fl connector for external active antenna. Front panel mount for Raspberry Pi official camera. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way.

ARDUINO UNO R3 A000066 #ad - The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. It has 14 digital input/output pins of which 6 can be used as PWM outputs, a USB connection, a power jack, 6 analog inputs, a 16 MHz quartz crystal, an ICSP header and a reset button.

Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users.

#ad